Instruction/ maintenance manual of the product DH04200 Drolet
Go to page of 16
OWNER`S MANUAL OIL BURNING STOVE EVEREST Vérified and tested following CAN/CSA B140.3 et UL 896 standards by : Intertek Testing Services Manufactured by: 1700 Léon-Harmel Québec, (Québec) G1N 4R9 www.
TABLE OF CONTENT TECHNICA L DATA ................................................................................................................. ........................ 1 INSTALLATION INSTRUCT IONS ..................................................
INSTALLATION INSTRUCTIONS LOCATING THE STOVE • Install the stove as close to the chimney as po ssible. • Many configurations are possible, the most frequent a re illust rated in figures 1, 2 and 3. • Respect clearances indicated on page 1. T hey have been tested according to approvals.
CHIMNEY INFORMATIONS • Before the hook up of the stove, check if the chimney is in good condition and that the quality of the flue pipe will allow a sufficient d raught. For a good combustion, refer to t he technical data of the stove to know the minimum draught requi red.
CONNECTING THE STO VE TO THE CHIMNEY • The gases are vented from the back of the unit. The female part of the black pipe connector has to be installed toward the flue con necto r of the stove. Secure all conne ctions with the (3) self taping screws, with 120 o distance between each of them.
LEVELING THE UNIT • Now that the stove is in place an d properly hooked up to the chimney, you have to adjust the level on the burner. • Put the level in the middle of the burner parallel to the door. (Fig ure 9A). Screw or unscrew the adjustable legs to level the burner with a 7/16" key (10 mm).
CONNECTING STOVE TO OIL TANK • Make sure that the tank outlet is 12" (30 5 mm) hi gher than the inlet of the carburetor. (Gravity fed) • Use only copper piping to conne ct tank to stove. • Make sure that there is a small slop e on t he connection from the tank toward the stove.
ADJUSTING THE DRAUGHT • Your stove operated with natural drau ght, creat ed by the ascension of combustion gase s in the chimney. This movement creates a si phon effect in the stove and forces ambient air to go in the burner by the holes in its surround.
OPERATION INSTRUCTIONS COMBUSTIBLE • Your stove has been designed to work with oil #1 or #2. DO NOT USE GASOLINE, CRANKCASE OIL OR ANY OIL CONTAINING GASOLINE. The manuf acturer declines all responsibility reg arding damage cause by using other combusti bles.
LIGHTING (CONT’D) • Place the flow regulating handl e on the "1" posit ion, as soon as the oil enters the burner return to "0" position. • Open the door a nd pore into the burner 2 to 3 once (75 ml) of lighting g el or wood alcohol.
TURNING THE STOVE OFF • Set the flow regulating handle to position ‘’0’’. • If you plan to keep the stove off for a long while, it is recomm ended to disarm the valve’s lever and close the tap on the pipe between the st ove and your oil tank.
TROUBLESHOOTING GUIDE PROBLEMS CAUSES SOLUTION ON POSITION 6 (MAXIMUM) THE FLAME IS LONG AND SMOKY, THERE IS SUIT BUILD UPON THE GLASS. Position 6 was reached too quickly. 1. Set flow regulating handle to position 1; 2. wait for combustion to stabilize; 3.
TROUBLESHOOTING GUIDE (CONT’D) PROBLEMS CAUSES SOLUTION THE FLAME PRODUCES SMOKE, IN ANY POSITION. Door gasket is not selling properly. 1. Tighten door by turning counter-clockwise the do or handle; 2. Check if gasket needs to be changed. The burner orifice s are plugged up.
SPARE PARTS After years of use, if you need to replace some pa rts, please co nta ct your SUPPLIER or one of our Drolet approved DEALERS . • Give him product data as displ ayed in your warr anty voucher or on your applian ce’ s name plate at the rear.
SPARE PARTS (CONT’D) Figure 16: EVEREST EXPLODED VIEW, SPARE PARTS LIST Page 14 of 15.
W A R R A N T Y The warranty of the ma nufacturer applies to the original buy er only. This warranty may not be transferred to a second person and becomes effective on the date of purchase. Proof of purchase is necessary to validate the w arranty and to establish the w arranty coverage period.
An important point after buying a device Drolet DH04200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Drolet DH04200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Drolet DH04200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Drolet DH04200 you will learn all the available features of the product, as well as information on its operation. The information that you get Drolet DH04200 will certainly help you make a decision on the purchase.
If you already are a holder of Drolet DH04200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Drolet DH04200.
However, one of the most important roles played by the user manual is to help in solving problems with Drolet DH04200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Drolet DH04200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
