Instruction/ maintenance manual of the product RZ Dremel
Go to page of 2
Accessories must be rated for at least the speed recommended on the tool warning label. Sanding Discs and other accessories running over r ated speed can fly apart and cause injury. Sanding discs, backing pad or any other accessory must have a maximum safe operating speed greater than the "no load RPM" marked on the tool's nameplate.
MONTAGE DES DISQUES DE PONÇAGE ET DE POLISSAGE ZIP DISCS SUR LA PLAQUE DE SUPPORT Utilisez uniquement des mécanismes de verrouillage désignés par Rotozip et construits directement sur la plaque de support pour le montage sur les accessoires Zipmate 2 et 3.
An important point after buying a device Dremel RZ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dremel RZ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dremel RZ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dremel RZ you will learn all the available features of the product, as well as information on its operation. The information that you get Dremel RZ will certainly help you make a decision on the purchase.
If you already are a holder of Dremel RZ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dremel RZ.
However, one of the most important roles played by the user manual is to help in solving problems with Dremel RZ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dremel RZ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
