Instruction/ maintenance manual of the product RM2812 Dometic
Go to page of 12
1 Form No. 3105757.003 2/94 The Dometic Corp. LaGrange, IN 46761 © 1994 The Dometic Corporation REFRIGERA T OR MODEL RM2612 RM2812 INST ALLA TION & OPERA TING INSTR UCTIONS MODEL RM2612 AND RM281.
2 SECTION A. INST ALLA TION 2. VENTILA TION The installation shall be made in such a manner as to separate the combustion system from the living space of the mobile home or recreational vehicle. Openings in lower side vent for air supply or for venting of combustion products shall have a minimum dimension of not less than 1/4 inch.
3 5 . VENTILA TION HEIGHTS Refer to FIG 1., Page 2 Installation with roof Minimum Ventilation vent and lower side vent heights in: REFRIGERATOR INCHES MM RM2612 54 1372 RM2812 60 1524 LOWER VENT CUTOUT UPPER VENT CUTOUT 5-1/2" 21-9/16" 13-3/4" 23-3/4" NOTE : All cutout dimensions are +/– 1/8".
4 7 . INST ALLING REFRIGERA T OR IN ENCLOSURE NOTE : DO NOT install the appliance directly on carpeting. Carpeting must be removed or protected by a metal or wood panel beneath the appliance, which extends at least the full width and depth of the appliance.
5 9 . TESTING LP GAS SAFETY SHUT OFF The gas safety shutoff must be tested after the refrigerator is connected to LP gas supply. To test the gas safety shutoff, proceed as follows: A . Start the refrigerator according to the instructions, with 120 volts AC disconnected.
6 Do not use the chassis or vehicle frame as one of the conductors. Connect two wires at the refrigerator and route to the DC supply. 1 2 . INSTRUCTION FOR MOUNTING DOOR P ANEL The refrigerator is normally delivered without the door pan- els.
7 REFRIGERATOR KIT MODEL NO . COMPONENTS PART NO. RM2612 4A ROOF BASE 3103633.XX X * RM2812 ROOF COVER 3103634.XX X * LOWER SIDE VENT 3102277.XX X * POWE R VENT POWER VENT ASM. 3104131.00 2 ** (Island/through ROOF BASE 3103633.XX X * floor) ROOF COVER 3103634.
8 2 . CONTROL P ANEL LEGEND 1. Main Power Button ON/OFF 2. AUTO/MANUAL Mode Selector Button A . AUTO Mode indicator Lamp B . CHECK Indicator Lamp (GAS Mode Only) C . Climate Control Switch 3. OPERA TING INSTRUCTIONS A ) START-UP INSTRUCTIONS 1 ) 12 volt DC supply must be available for the electronic control to function.
9 will automatically switch to GAS. As soon as AC becomes available again, the control will switch back to AC operation. 3 ) If the CHECK indicator lamp (B) illuminates, the control has failed to ignite the burner on GAS.
10 When all frost is melted, dry the interior of the refrigerator with a clean cloth. Replace all food and start the refrigerator by pressing the ON/OFF button (1) to DOWN position. NOTE: On these models the drip tray/cup is on the rear side of the refrigerator.
11 free of soot. Heavy soot formation indicates improper functioning of the burner. The flue and burner both require cleaning in the following manner: 1 ) Unplug the refrigerator power cord from the 120 volt AC outlet (see FIG. 6). 2 ) Disconnect or shut off the 12 volt power to the refrigerator.
12 E . Flue baffle not inserted properly in flue tube. F. Improperly set thermostat. See Section C. Operating Instructions, Item 3. Paragraph F, and Item 4, Paragraph H . G. Burner dirty. Clean. See Section D. Maintenance & Service, Item 1. Periodic Maintenance, Paragraph E.
An important point after buying a device Dometic RM2812 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dometic RM2812 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dometic RM2812 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dometic RM2812 you will learn all the available features of the product, as well as information on its operation. The information that you get Dometic RM2812 will certainly help you make a decision on the purchase.
If you already are a holder of Dometic RM2812, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dometic RM2812.
However, one of the most important roles played by the user manual is to help in solving problems with Dometic RM2812. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dometic RM2812 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
