Instruction/ maintenance manual of the product RM2652 Dometic
Go to page of 20
INST ALLA TION AND OPERATING INSTRUCTIONS REFRIGERA TOR FOR LP-GAS AND ELECTRIC OPERA TION RM2652 RM2852 USA Corporate Office CANADA Service Office 2320 Industrial Parkway Elkhart, IN 46515 Dometic Distribution Inc.
.
3 Refrigerator control p anel FIG. 2 CHECK GAS AU TO ON OFF A UTOMA TIC REFRIGERA T OR TEMPERA TURE CONTROL 12 AB C LEGEND 1 . Main Power Button ON/OFF 2 . AUT O/GAS Mode Selector Button A . AUT O Mode Indicator Lamp B . CHECK Indicator Lamp (GAS Mode Only) C .
4 INST ALLA TION GENERAL INSTRUCTION This appliance is designed for storage of foods and storage of frozen foods and making ice. This appliance is certified under the latest edition of ANSI Z21.
5 12 V olt s DC Connection This refrigerator model is not designed for 12 volt DC operation of the cooling system; however , a continuous 12 volt DC must be supplied to the refrigerator to oper- ate the controls. Use a minimum of a 14 gauge wire between the battery and refrigerator to supply the con- trol voltage.
6 2. Once the lower front strip is slipped under the hinge, the part is possible to swing into place as shown in FIG . 6. 3. Secure the refrigerator and the lower front strip with two screws: One screw through the hinge, and on the opposite side one screw through the lower front strip.
7 CERTIFIED INST ALLA TION Certified installations require one roof vent and one lower side vent. For “Certified Vent System Kits” see page 15 . For further information contact your dealer or distributor .
8 OPERA TING INSTRUCTIONS IMPORTANCE OF LEVELING A REFRIGERATOR In an absorption refrigerator system, ammonia is lique- fied in the finned condenser coil at the top rear of the refrigerator.
9 GAS MODE 1. Move the AUTO/GAS mode selector button (2) to the UP position. The AUTO mode indicator lamp (A) will go off. Within 45 seconds the burner should be ignited and operating normally . 2. If the CHECK indicator lamp (B) illuminates, the con- trol has failed to ignite the burner on GAS.
10 DESCRIPTION OF OPERA TING MODES AUTO MODE When operating in the AUTO mode, the AUTO mode indicator lamp (A) will illuminate. The control system will automatically select between AC and GAS operation with AC having priority over GAS.
11 ! WARNING When all the frost has melted, dry the interior of the re- frigerator with a clean cloth. Replace all food and turn your refrigerator back on. CLEANING Cleaning the refrigerator is usually done after it is defrosted or put into storage. T o clean the interior liner of the re- frigerator , use lukewarm weak soda solution.
12 ELECTRIC EQUIPMENT CARTRIDGE HEA TER The heat necessary for the operation of an absorption cooling unit is supplied by an electric heater mounted in a pocket of the boiler system. These models are equipped with one electric heater for 120 volt AC. T o replace the heater proceed as follows: 1.
13 B . Check all connections in the LP gas system (at the back of the refrigerator) for gas leaks. The LP gas supply must be turned on. Apply a non-corrosive bubble solution to all LP gas connections.
14 H. Burner not located properly under flue tube. Relocate. I. Burner damaged. Replace. J. Odor from fumes. 1. Dislocated burner 2. Damaged burner 3. Dirty flue tube K. FUSES 1. Refrigerator AC Supply 2. Refrigerator control system See page 12, part FUSES.
15 1 1 1 1 1 1 2 3 3 4 5 CERTIFIED VENT SYSTEM KITS REFRIGERATOR KIT MODEL NO. COMPONENTS PART NO. RM2652 4A Roof Base 3103633.XXX* RM2852 Roof Cover 3103634.XXX* Lower Side Vent 3109350.XXX* * Fill in “XXX” with color code numbers. For color codes, contact your supplier.
16 Put a screwdriver into the slot of the shelf lock. Turn the screwdriver counterclockwise. Remove the shelf locks from the wire shelf. Insert the ends of the wire shelf on the left-hand side at the desired position. Slide the wire shelf to the left.
17 RM2652, RM2852.
18.
19.
20 MO-FO 0327.
An important point after buying a device Dometic RM2652 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dometic RM2652 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dometic RM2652 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dometic RM2652 you will learn all the available features of the product, as well as information on its operation. The information that you get Dometic RM2652 will certainly help you make a decision on the purchase.
If you already are a holder of Dometic RM2652, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dometic RM2652.
However, one of the most important roles played by the user manual is to help in solving problems with Dometic RM2652. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dometic RM2652 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
