Instruction/ maintenance manual of the product RM2454 Dometic
Go to page of 16
INST ALLA TION AND OPERATING INSTRUCTIONS REFRIGERA TOR FOR LP-GAS AND ELECTRIC OPERA TION RM2454 USA Corporate Office CANADA Service Office 2320 Industrial Parkway Elkhart, IN 46515 Dometic Distribution Inc.
.
3 Refrigerator control panel FIG. 2 ON OFF AC DC GAS AU TO CHECK COLD 1 2 3 4 5 COLDEST LEGEND 3-WAY AMES Model 1 . Main Power Button ON/OFF 2 . DC Mode Selector Button 3 . AUTO/GAS Mode Selector Button 4 . Temperature Selector Button A . DC Mode Indicator Lamp B .
4 INST ALLA TION GENERAL INSTRUCTION This appliance is designed for storage of foods and storage of frozen foods and making ice. This appliance is certified under the latest edition of ANSI Z21.
5 VENTILA TION HEIGHTS Refer to FIG . 3 page 4. CLEARANCES Minimum clearances in inches to combustible materials are: G: Top 0 K: Side 0 L: Bottom 0 M: Rear 0 N: See NOTE: Clearance “N” below. NOTE: Clearance “M” is between the rearmost part of the refrigerator and the wall behind the refrigerator.
6 INST ALLING REFRIGERA TOR IN ENCLOSURE NOTE: DO NOT install the appliance directly on carpeting. Carpeting must be removed or protected by a metal or wood panel beneath the appliance, which extends at least full width and depth of the appliance. NOTE: A wood strip must be in place across the upper opening of the enclosure.
7 Replace the top decoration panel. Be careful not to pinch the wires behind the panel. Make sure the tabs snap back into the holes in the hinge plate. STEP 3: Two screws installed in the rear base. See FIG. 10. Failure to follow the sequence in securing the refrigerator in the enclosure can cause leakage between the frame and cabinet.
8 ELECTRICAL CONNECTION 120 V olt s AC Connection The refrigerator is equipped with a three-prong (ground- ing) plug for your protection against shock hazards and should be plugged directly into a properly grounded three-prong receptacle. DO NOT cut or remove the grounding prong from this plug.
9 DC MODE 1. Press the DC mode indicator button (2) to turn ON the DC lamp (A). 2. Press the TEMPERATURE SELECTOR button (4) until the lamp at the desired position is illuminated.
10 DESCRIPTION OF OPERA TING MODES AUTO MODE When operating in the AUTO mode, the AUTO mode indicator lamp (D) will illuminate. The control system will automatically select between AC and GAS operation with AC having priority over GAS.
11 ! W ARNING When all the frost has melted, dry the interior of the re- frigerator with a clean cloth. Replace all food and set the thermostat to the COLDEST temperature setting for a few hours. Then reset the thermostat to the desired set- ting, usually at mid setting.
12 MAINTENANCE & SERVICE The user should be aware of service that must be done on a regular schedule to keep the refrigerator operating properly . The service should only be per- formed by a qualified technician who is familiar with LP gas systems and refrigerators.
13 C. Check the AMES control system by connecting/dis- connecting 120 volt AC power, start/stop the engine, etc. Compare the operation with the operation de- scribed in section Operating Instructions. D. The LP gas pressure should be checked and the main regulator readjusted if pressure is incorrect.
14 H. LP gas pressure low at burner . Set main regulator so pressure does not drop below 1 1 inches of water column at pressure test port. (See FIG . 12). I. Burner not located properly under flue tube. Relocate. J. Burner damaged. Replace. K. Odor from fumes.
15 CERTIFIED VENT SYSTEM KITS REFRIGERATOR KIT MODEL NO. COMPONENTS PART NO. RM 2454 3A Roof Base 3103633.XXX* Roof Cover 3103634.XXX* Lower Side Vent 3109350.XXX* * Fill in “XXX” with color code numbers. For color codes, contact your supplier. For further information contact your dealer or distributor.
16 MO-FO 0413 RM 2454.
An important point after buying a device Dometic RM2454 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dometic RM2454 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dometic RM2454 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dometic RM2454 you will learn all the available features of the product, as well as information on its operation. The information that you get Dometic RM2454 will certainly help you make a decision on the purchase.
If you already are a holder of Dometic RM2454, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dometic RM2454.
However, one of the most important roles played by the user manual is to help in solving problems with Dometic RM2454. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dometic RM2454 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
