Instruction/ maintenance manual of the product RM2354 Dometic
Go to page of 16
INST ALLA TION AND OPERATING INSTRUCTIONS REFRIGERA TOR FOR LP-GAS AND ELECTRIC OPERA TION RM2354 USA Corporate Office CANADA Service Office 2320 Industrial Parkway Elkhart, IN 46515 Dometic Distribution Inc.
.
3 FIG. 1 Reigniter Power module cover Flexible cord 12 V DC T erminal block Inlet fitting Manual gas shutoff valve Burner jet Screw for protection cover Protection cover Drain water hose Flue baffle Heaters Relay Refrigerator control panel FIG.
4 INST ALLA TION GENERAL INSTRUCTION This appliance is designed for storage of foods and storage of frozen foods and making ice. This appliance is certified under the latest edition of ANSI Z21.
5 VENTILA TION HEIGHTS Refer to FIG . 3a, 3b and 4. CLEARANCES Minimum clearances in inches to combustible materials are: G: Top 0 K: Side 0 L: Bottom 0 M: Rear 1 N: See NOTE: “N” below. NOTE: Clearance “M” is between the rearmost part of the refrigerator and the wall behind the refrigerator.
6 INST ALLING REFRIGERA TOR IN ENCLOSURE NOTE: DO NOT install the appliance directly on carpeting. Carpeting must be removed or protected by a metal or wood panel beneath the appliance, which extends at least full width and depth of the appliance. The refrigerator must be installed in a substantial enclo- sure and must be level.
7 TESTING LP GAS SAFETY SHUTOFF The gas safety shutoff must be tested after the re- frigerator is connected to the LP gas supply. T o test the gas safety shutoff, proceed as follows: 1. S tart the refrigerator and switch to GAS mode. (See start up instructions).
8 OPERA TING INSTRUCTIONS IMPORT ANCE OF LEVELING A REFRIGERA TOR In an absorption refrigerator system, ammonia is lique- fied in the finned condenser coil at the top rear of the refrigerator .
9 Refrigerator control p anel DC MODE 1. Press the DC mode indicator button (2) to turn ON the DC lamp (A). 2. Press the TEMPERA TURE SELECTOR button (4) until the lamp at the desired position is illuminated.
10 Refrigerator control p anel DESCRIPTION OF OPERA TING MODES AUTO MODE When operating in the AUTO mode, the AUT O mode indicator lamp (D) will illuminate. The control system will automatically select between AC and GAS operation with AC having priority over GAS.
11 HOW T O USE THE REFRIGERA T O R FOOD STORAGE COMP ARTMENT The food storage compartment is completely closed and unventilated, which is necessary to maintain the required low temperature for food storage. Consequently , foods having a strong odor or those that absorb odors easily should be covered.
12 MAINTENANCE & SERVICE The user should be aware of service that must be done on a regular schedule to keep the refrigerator operating properly . The service should only be per- formed by a qualified technician who is familiar with LP gas systems and refrigerators.
13 C. Check the AMES control system by connecting/dis- connecting 120 volt AC power , start/stop the engine, etc. Compare the operation with the operation de- scribed in section Operating Instructions. D. The LP gas pressure should be checked and the main regulator readjusted if pressure is incorrect.
14 F . Improperly set thermostat. See section Operating Instructions, part S tart Up Instructions. G . Burner dirty . Clean. (See section Maintenance & Service, Item 3. Periodic Maintenance, Paragraph E. Item 1-14). H. LP gas pressure low at burner .
15 Put a screwdriver into the slot of the shelf lock. Turn the screwdriver counterclockwise. Remove the shelf locks from the wire shelf. Slide the wire shelf to the left. The right-hand side of the shelf will come loose. Lower the right-hand side of the wire shelf and let the left-hand side slide out of the holes in the wall.
16 RM2354 MO-FO 0438.
An important point after buying a device Dometic RM2354 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dometic RM2354 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dometic RM2354 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dometic RM2354 you will learn all the available features of the product, as well as information on its operation. The information that you get Dometic RM2354 will certainly help you make a decision on the purchase.
If you already are a holder of Dometic RM2354, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dometic RM2354.
However, one of the most important roles played by the user manual is to help in solving problems with Dometic RM2354. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dometic RM2354 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
