Instruction/ maintenance manual of the product RM2301 Dometic
Go to page of 10
REFRIGERATOR FOR LP-GAS AND ELECTRIC OPERATION. RM2301 RM2401 RM2501 RM2601 RM2801 FOR YOUR SAFETY If you smell gas: 1. Open windows. 2. Don’t touch electrical switches.
INSTALLATION GENERAL INSTRUCTIONS This appliance is designed for storage of foods and stor- age of frozen foods and making ice. The refrigerators outlined hereon have been design certified under ANS Z21.
SPECIAL HINTS Note. Do not install the appliance directly on carpeting. Carpeting must be protected by a metal or wood panel beneath the appliance which extends at least full width and depth of the appliance. The refngerator must be installe d in a substantial enclosure and must be level.
CERTIFIED INSTALLATION # Certified installations require one roof vent and one lowe r side vent or as optional one upper vent and one lower side vent The two alternatives are provided for by using the drfferent kits listed in th e Appendix. For furthe r information contact your dealer or distributor.
CLEARANCES Minimum clearances in inches t o combustible materials are G: Top 0 K: Side 0 L: Bottom 0 M: Rear 1 N: See example below Clearance M between th e rearmost part of the refrigerator and the wall behind the refrigerator Clearance N on top of the condenser is related to the minimum ventilation heiqht See Fig 11 and examples below Fig.
INSTRUCTIONS FOR USE HOW TO START THE REFRIGERATOR Leveling In the boiler ammonia vapor is distilled from an am- monia-water mixture and carried to the fined con- denser, where it liquifies. The liqiud flows to the eva- porato r where it creates cold by evaporating into a circulating flow of hydrogen gas.
Defrosting Shut off the refrigerator. tmpty the retrigerator leaving the drip tray under the finned evaporator and th e cabinet and freezer doors open. If desired, defrosting may be speeded up b y fil- ling the ice tray with hot water and placing it in the freezer.
GAS EQUIPMENT Flue Top and Baffle The flue baffle is suspended from th e top, and must be in position in the central tube of th e cooling unit. The Flame Failure Safety Device The feeler of th e thermo couple shall reach in over two slots of the burner.
PERIODIC MAINTENANCE NOTE. Before working on the refrigerator make sure that 120 V A.C and optional 12 V D.C leads are di- sconnected. Shut off gas valve. The Burner and the Burner Jet Th e color of the flame shall be clear blue over the slots of the burner.
INSTRUCTIONS FOR MOUNTING THE DOOR PANEL INSTRUCTIONS FOR MOUNTING THE DOOR PANEL The refrigerator is normally delivered without door panel(s). Before starting the mounting work check that the panel dimensions are in compliance with those given in the table and read the instructions through.
An important point after buying a device Dometic RM2301 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dometic RM2301 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dometic RM2301 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dometic RM2301 you will learn all the available features of the product, as well as information on its operation. The information that you get Dometic RM2301 will certainly help you make a decision on the purchase.
If you already are a holder of Dometic RM2301, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dometic RM2301.
However, one of the most important roles played by the user manual is to help in solving problems with Dometic RM2301. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dometic RM2301 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
