Instruction/ maintenance manual of the product RM 4223 Dometic
Go to page of 12
.
1. GENERAL INSTRUCTIONS This appliance is designed for storage of food and storage of frozen food and making ice. The refrigerators outlined herein have been design certi- fied by A.G .A. under ANSI Z21.19 Refrigerator S tandard for installation in a mobile home or recreational vehicle and are approved by the Canadian Gas Association.
FIG .1a 5. VENTILA TION HEIGHTS Refer to FIG 1 & FIG . 1A., Pages 1 & 2 Installation with * Minimum V entilation Upper side vent Height N And lower side vent REFRIGERA TOR INCHES MM RM 4223 Metal Side V ent s 21.0 533 (2) RM 183 V ents RM 4223 Plastic Side V ents (1) 3107560.
7. INST ALLING REFRIGERA TOR IN ENCLOSURE NOTE: DO NOT inst all the appliance directly on car- peting. Carpeting must be removed or protected by a met al or wood p anel beneath the appliance, which extends at least the full wid th and depth of the appli- ance.
B. SECURING REFRIGERA T OR IN ENCLOSURE The refrigerator is installed in the enclosure with eight screws. Six screws are in the front frame and two are in the plate on the rear . See FIG . 5. NOTE: Push refrigerator into enclosure until front frame is tight against the cabinet.
9. TESTING LP GAS SAFETY SHUTOFF The gas safety shutoff must be tested af ter the refrigera- tor is connected to LP gas supply . T o test the gas safety shutoff, proceed as follows: A. S tart the refrigerator according to the instructions for LP Gas Operation.
13. INST ALLA TION OF DECORA TIVE DOOR P ANEL The door panel can easily be mounted. The dimensions of the panel must be: Height 19-3/4" Width 17-27/32" Thickness Up to 1/8" Weight 49 lbs. A. Remove the door . See Section 12. B. Remove the lower trim molding.
2. CONTROLS The gas and electric controls are located at the rear of the refrigerator and are accessible through the lower vents in the out side wall of the vehicle.
B. ELECTRIC OPERA TION 12V DC / 120V AC OPERA TION In the case of the RM4223, the refrigerator works conti- nuously on DC operation (no thermostat control). On AC operation, the temperature is controlled by a ther- mostat. The thermostat knob (C, in FIG .
E. CLEANING Cleaning the refrigerator is usually done after it is defro- sted or put into storage. T o clean the interior of the refri- gerator , use lukewarm water and a mild dishwashing detergent. Use only warm water to clean the finned eva- porator , gaskets, ice trays and shelves.
C. Examination and Cleaning of Flue, Burner and Jet Once or twice a year , look through the opening (see FIG . 9) in the burner box and examine the appearance of the burner flame which should be predominantly blue in color when the gas thermostat knob is set to it s highest position.
7) Reassemble the components in the reverse order to that described for removal, taking care to remake the gas connections soundly , and not forgetting to refit the flue baffle. 8) Reinstall the refrigerator in its recess. Connect the gas and electrical supplies, and check for gas leaks.
An important point after buying a device Dometic RM 4223 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dometic RM 4223 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dometic RM 4223 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dometic RM 4223 you will learn all the available features of the product, as well as information on its operation. The information that you get Dometic RM 4223 will certainly help you make a decision on the purchase.
If you already are a holder of Dometic RM 4223, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dometic RM 4223.
However, one of the most important roles played by the user manual is to help in solving problems with Dometic RM 4223. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dometic RM 4223 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
