Instruction/ maintenance manual of the product 2500 Dometic
Go to page of 8
1 A&E C AT ALIN A 2500 A&E Systems USA Service Office The Dometic Corp. 509 South Poplar S t. LaGrange, IN 46761 CANADA Dometic Dist. 866 Langs D r . Cambridge, On t ario CANADA N3H 2N7 Ca t alina 2500 INS T ALL A TION & OPER A TING INSTRUCTIONS REVISION Form No.
2 A&E CA T ALINA 2500 A&E CA T ALINA 2500 INST ALLA TION/OPERA TION APPLICA TION The A&E Cat alina 2500 Case A wning is designed and intended for direct mounting on straight and most curved mini-motorhomes, pick-up campers, vans, van conversions and pop-up tent trailers.
3 A&E CA T ALINA 2500 Note: Make sure lock in top of awning arm assembly clears top of case lip (FIG . 4C). This is necessary for awning to open properly . T ighten lock knob. Repeat steps 4B & 4C for other side. C. Using wand, hook pull-strap and pull awning out about 3 feet (1 meter) (FIG .
4 A&E CA T ALINA 2500 T ighten lock knob. Repeat S tep 9B for other side. Note: For curved sided vehicles skip to S tep 13. 10. Reattach foot to bottom mounting bracket. Loosen lock knob on arm assembly . Raise inner arm as high as it will go. Then tighten lock knob (FIG .
5 A&E CA T ALINA 2500 17. Using wand, check to see if awning opens and closes correctly by pulling awning open about 3 feet (1 meter) (FIG . 17). Note: For installation on some curved sided vehicles S tep 18 does no apply .
6 A&E CA T ALINA 2500 C. T ighten lock knob on arm assembly . 5. Using wand, hook pull-strap and pull awning out by unrolling the fabric (FIGS. 5A and 5B). FULL EXTENSION During operation for fully extended awning, fabric can be rolled out and rafter lock buttons will automatically snap into place to lock awning in full extension.
7 A&E CA T ALINA 2500 3. Firmly grasp pull-strap and loosen lock knobs (FIG . 3A). While tightly holding pull-strap, pull on strap to relieve pressure from rafter lock buttons and push raf ter lock buttons in to unlock rafters and allow awning to roll up (FIG .
8 A&E CA T ALINA 2500 the awning case. Note: Make sure lock in top of awning arm assembly engages case lip (FIG . 7G). If lock does not engage case lip, raise arm height until lock clears lip and then engages. This is necessary for proper operation of awning case locks.
An important point after buying a device Dometic 2500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dometic 2500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dometic 2500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dometic 2500 you will learn all the available features of the product, as well as information on its operation. The information that you get Dometic 2500 will certainly help you make a decision on the purchase.
If you already are a holder of Dometic 2500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dometic 2500.
However, one of the most important roles played by the user manual is to help in solving problems with Dometic 2500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dometic 2500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
