Instruction/ maintenance manual of the product Chain Saw Dolmar
Go to page of 5
Chain Saw Safety Instructions.
4 Safety precautions for chain saw operators While operating the chain saw please observe the following rules: a) Contact of the guide bar nose with any object should be avoided. b) Tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious or fatal injury.
5 General Safety Precautions The use of any chain saw may be hazardous. At full throttle chain speed can reach 45 mph (20 m/s). It is important that you read; fully understand and observe the following safety precautions and warnings. Read the owner’s manual and the safety instructions periodically.
6 3 Good footing is most important in chain saw work. Wear sturdy boots with nonslip soles. Steel-toed safety boots are recommended. Proper eye protection is a must. Non-fogging, vented goggles and a face screen is recommended. Their use reduces the risk of eye and facial injury.
7 Chain saw operating instructions For assembly follow the procedure in the appropriate section "Mounting Guide Bar and Chain" of this manual. MAKITA chain, guide bar and sprocket must match each other (see the appropriate section in this manual).
An important point after buying a device Dolmar Chain Saw (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dolmar Chain Saw yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dolmar Chain Saw - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dolmar Chain Saw you will learn all the available features of the product, as well as information on its operation. The information that you get Dolmar Chain Saw will certainly help you make a decision on the purchase.
If you already are a holder of Dolmar Chain Saw, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dolmar Chain Saw.
However, one of the most important roles played by the user manual is to help in solving problems with Dolmar Chain Saw. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dolmar Chain Saw along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
