Instruction/ maintenance manual of the product TFDVD 2695 Dolby Laboratories
Go to page of 30
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufcient magnitude to constitute a risk of electric shock.
W ARNING: T o prevent re or shock hazard, do not expose this device to rain or mois ture. Dangerous high voltage is present inside the enclosure. Do not open the cabinet. Note: If the product suddenly has no response or powers off, an electrostatic discharge may be the cause.
W arnings and precautions T o prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely , and keep it nearby for future reference.
Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: An outdoor antenna should not be located in any area where it could come in contact with overhead • power lines, or any other electric light or power circuits.
T able Of Contents Precautions Important Safety Instructions Main Feature-----------------------------------------------------------------------------------------------------------------------------1 .
1 Multiple Mode TV A V1 A V2 S-VIDEO COMPONENT1 COMPONENT2 DVD HDMI1 HDMI2 HDMI3 VGA High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines. Superior sound Built-in Dolby Digital decoder to output high quality sound effects.
2 Please make sure the following items are included with your product. If any item is missing , contact your dealer . a, Main Unit b, Power Cord & RCA Cable c, Remote Control Unit Package Contents a.
3 2 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ANT IN A C ￣ 100V-240V 50Hz/60Hz W all Mounting - Attach the TV case to the wall Separate the TV case and the stand-base by removing screws before installation. • Use the VESA standard mountings to x the unit on the wall.
4 Remote Control Drawing 1. POWER T urn the unit on or off (standby). 2. Numeric Keypad Input numberic data. Access the TV channel directly . 3. Sub-channel Selector <-> This button is usually used with the numeric keypad to tune to a channel substation (e.
5 21. OPEN/CLOSE In the DVD mode, press this button to take in/out disc automatically . 22. RETURN Reveal the previously viewed channel. 23. Skip Forward Repeatedly press this button to skip forward through DVD playback.
6 Remote Control Remote Control Preparation Remove the battery compartment cover located on the rear of the remote control. Insert 2 x “AAA” • batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment.
7 Figure. Cable connections Antenna/Power Connection Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CA TV net. Y ou 1. can use 75 Ohm coaxial cable to connect outdoor antenna. Insert one end of the supplied power cord to the player ’s power jack and the other end to the 1 10-240V 2.
8 Coaxial Output - Digital Audio Output Connector When MPEG audio or Dolby Digital audio is played, Dolby Digital bitstream or MPEG audio bitstream is sent to the player ’s digital audio output connector . When the player is connected to a Dolby or MPEG audio decorder via this output socket, you can enjoy theater-quality audio in your home.
9 HDMI 1/2/3 Input Component 1/2 Input (Y Cb/Pb Cr/Pr) Cable Connections A C ￣ 100V-240V 50Hz/60Hz External A V Source Component 1 Connection The component port is capable of accepting high-definition signals from standard video sources. (e.g., cable/ satellite boxes, DVD players, VCRs, etc.
10 S-Video Input A C ￣ 100V-240V 50Hz/60Hz External A V Source External A V Source Yellow Supplied RCA Cable Red Yellow Red Unit Rear Panel AV1 Connection Unit Side Panel AV2 Connection The S-Video port is capable of accepting sig nal s f rom st an dar d v ide o s ou rce s.
11 TV Function Preparations Connect cables.(Refer to the “Cable Connections” section for details). 1. Press POWER to turn on the player . 2. Press SOURCE to select the TV signal mode. 3. a. Press the SOURCE button to display the Input Source menu.
12 Menu Description Picture Menu Audio Menu ITEM DESCRIPTION Sound Mode Set the sound mode as Standard/News/Music/Movie/Custom Bass Adjust the bass. T reble Adjust the treble. Balance Adjust the sound balance. Surround Set the audio surround effect on/of f.
13 Menu Description Option Menu ITEM DESCRIPTION Parental Controls - Press the right direction button to access Enter Password. Input the 4-digit password to display parental control menu. The initial password is 0000. Change Password - T o change the password, input the old password - -> input the new password- - >verify again.
14 ITEM DESCRIPTION Air/Cable Setup the antenna type as Air or Cable. Auto Scan Search channels automatically . Select this option, press the right button to start searching, press MENU to stop. Favorite Make the favorite channels collection. Select this option, press the right direction button to access the Favorite List.
15 A V Function The player ’s A V input function enables the user to view programs from external input sources. Connect the external A V signal source. Refer to the “Cable Connection” section for details 1. Press the SOURCE button to select the relevant A V mode 2.
16 PC Function Y ou can use the unit’s TFT LCD as your computer ’s monitor . Shut down both units and connect the VGA jack and PC Audio In jack. See the “Cable Connection” 1. section. T urn on units and press the SOURCE button to select VGA 2.
17 Preparation After all necessary connections have been made, press POWER to turn on the player and then press the MODE button to select DVD. The following discs can be read by the player : DVD /CD / MP3 /JPEG. Disc Loading 1. Put the disc slightly into the disc tray .
18 CD Playback The player will play all tracks on a CD disc by default. MP3 Playback Load a disc into the disc tray . 1. It will start playback automatically . Or press direction buttons to select a le from the menu and press OK 2. or PLA Y/P AUSE button to start playback.
19 Start Playing Press PLA Y/P AUSE to start playback Pause Playing Press PLA Y/P AUSE once to hold playback, press it again to resume. Stop Playing Press STOP once to stop playback at a time point. (Pre-stop mode) It will resume from where it was stopped, when you press PLA Y button.
20 Slow Playback Slow Motion Press the SLOW button on the remote to have current playback advanced in a slow motion, repeatedly press this button to change speed as below . Step by Step Press Play/Pause to pause current playback, and then repeatedly press SLOW to have playback moved step by step forward.
21 V arious features can be preset through the DVD setup menu. Press the DVD SETUP button to show the DVD menu. While working with the setup menu: Press the direction buttons to select the desired item. 1. Press the right direction button or the OK button to conrm settings.
22 Language Setup Item Instruction Default OSD Language Setup the OSD language. English Audio Lang Setup the audio language. English Subtitle Lang Setup the subtitle language. When OFF is English selected, the subtitle will not be displayed. Menu Lang Setup the menu language.
23 If you have a problem with this device, please read the troubleshooting guide section and check our website at www .cobyusa.com for Freq uently Asked Questions (F AQs) and rmware updates. If these resources do not resolve the problem, please contact T echnical Support.
24 Specication Active Area Resolution Display Color Pixel Pitch TV System Antenna Impedance Power Consumption Operating T emperature Range TFT Panel Characteristic TV Charactoristic Standard 26" 1366X768 8 bit -16.
TFT LCD Widescreen Television Instruction Manual Please read this manual carefully before connection and use TFDVD2695/3295.
An important point after buying a device Dolby Laboratories TFDVD 2695 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dolby Laboratories TFDVD 2695 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dolby Laboratories TFDVD 2695 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dolby Laboratories TFDVD 2695 you will learn all the available features of the product, as well as information on its operation. The information that you get Dolby Laboratories TFDVD 2695 will certainly help you make a decision on the purchase.
If you already are a holder of Dolby Laboratories TFDVD 2695, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dolby Laboratories TFDVD 2695.
However, one of the most important roles played by the user manual is to help in solving problems with Dolby Laboratories TFDVD 2695. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dolby Laboratories TFDVD 2695 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
