Instruction/ maintenance manual of the product GT Dodge
Go to page of 4
Because of the possibl e Danger to persons or property from accidents which may result from the impr oper use of products , it is important that correct proc edures be followed: Pro ducts must be used in accordance with the e ngineering informati on specified in the c atalog.
Section 2 - Taper-Lock Hub Installation Figure 2 : PXGTL Assembly (1) Insert bushing into hub. Match the hole pattern, not threaded holes (each complete hole will be threaded on one side only) . (2) Lightly oil setscrews and thread into those half-threaded holes with the threads in the hub.
Section 3 - Grip-Tight Hub Installation The DODGE Grip-Tight adapter mounted Para-Flex coupling incorporates a unique way of m ounting and dismounting a coupling to and from the shaft. The patented feature pushes the coupling hub onto the tapered adapter sleeve and locks it into place as the locknut is give n a predetermined clockwise rotation.
Section 4 – Flexible Element Installation (1) If flanges are being re-used, clean flange m ounting area as well as flexible element seats with a solvent, such as Xylene ( Xylol), to remove grease, oil, and dirt from surfaces. A diluted soapy wate r solution may be applied to aid with element installation.
An important point after buying a device Dodge GT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dodge GT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dodge GT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dodge GT you will learn all the available features of the product, as well as information on its operation. The information that you get Dodge GT will certainly help you make a decision on the purchase.
If you already are a holder of Dodge GT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dodge GT.
However, one of the most important roles played by the user manual is to help in solving problems with Dodge GT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dodge GT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
