Instruction/ maintenance manual of the product CSD-NS1 Aiwa
Go to page of 14
CSD-NS1 8B-CH1-903-01 010325ACK-I-IN U OPERA TING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D’EMPLOI English : See page 2. En Español : V er la página 14.
2 ENGLISH Precautions Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on the unit should be strictly followed, as well as the safety suggestions below.
ENGLISH 3 4 Extension cord - To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of the plug.
4 ENGLISH Power supply Connecting antennas Connect the AM loop antenna to the AM LOOP terminals on the rear of the unit. Keep the antenna away from metallic objects, electrical equipment and cords. For better FM reception, connect an outdoor antenna to the FM 75 Ω terminals.
ENGLISH 5 POWER FUNCTION En Remote contr ol Insert two R6 (size AA) batteries. • When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries. • Remove the batteries if the remote control is not going to be used for a long time.
6 ENGLISH 1 Press * TUNER/BAND repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. * or BAND on the remote control 2 Press r , t (TUNING f - , + g ) to select a station. During FM stereo reception, “STEREO” is displayed.
0-9, +10 MODE EQ a PAUSE VOLUME k , i s BAND DISPLAY r , t c PLAY ENGLISH 7 PRESETTING STATIONS You can preset up to 15 stations in each band. 1 Select a station. 2 Press * a PAUSE/SET once so that “MEMO” flashes to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band.
8 ENGLISH 1 Press CD. The power is turned on. 2 Press CD OPEN/CLOSE to open the disc compartment. Set a disc with the printed side up, then press CD OPEN/CLOSE to close the disc compartment. Total number of tracks and total playing time are displayed.
ENGLISH 9 0-9, +10 REPEAT a PAUSE MODE s STOP r , t c PLAY PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. Operate with the remote control. 1 In stop mode, press MODE repeatedly until “MEMO” flashes in the display. 2 Press the numbered buttons 0-9 and +10 to program a track.
Use Type I (normal) tapes only. PLAYBACK 1 Press TAPE/REV MODE. The power is turned on. If the tape has been inserted, play begins. 2 Press TAPE OPEN/CLOSE to open the cassette compartment and load a tape with the exposed side facing forward. Press TAPE OPEN/CLOSE to close the compartment.
En To prevent accidental erasure Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording. To record on the tape again Cover the tab openings with adhesive tape, etc. Tab for side A Side A RECORDING 1 Load a tape with the side to be recorded on facing up and the exposed side facing forward.
12 ENGLISH TIMER OPERATION D TIMER PLAYBACK/RECORDING The unit can be turned on at a specified time every day with the built-in timer. Make sure the clock is set correctly. 1 Press TIMER twice for timer play or three times for timer recording so that “ 5 ” or “ 5 REC” flashes in the display.
En ENGLISH 13 Maintenance To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
An important point after buying a device Aiwa CSD-NS1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa CSD-NS1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa CSD-NS1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa CSD-NS1 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa CSD-NS1 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa CSD-NS1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa CSD-NS1.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa CSD-NS1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa CSD-NS1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
