Instruction/ maintenance manual of the product ZTR 3362 Dixon
Go to page of 38
.
IMPORTANT READ CAREFULLY The Dixon ® ZTR ® Mower is both easy and fun to operate. However, any power mower must be operated properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower, read the operator's manual c arefully, and become completely familiar with the controls.
SAFETY........................................... ............ . WARRANTY POLICY...................... ............ . SPECIFICATIONS.......................... ........... .. SEAT ADJUSTMENT..................... ............ .. CONTRO LS...............
A SAFE TY RIDING LAWNMOWERS, IF IMPROPERLY OPERATED, CAN CAUSE SERIOUS INJURY OR DEATH The most common causes of injury to the operator or bystander...
SAFETY SYMBOLS: SAFETY ALERT SY MBOL - When you see this symbol, BE ALERT to the potential for injury. Follow recommended safety precautions and safe operating practices. Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
SAFETY This cutting mower is capable of amputating hands and feet, and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. GENERAL OPERATION: • Read, understand, and follow all instructions in the manual and on the mower before starting.
SAFETY SLOPE OPERATION: Slopes are a major factor related to loss - of - control a nd tip - over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.
SAFETY CHILDREN: Tragic accidents can occur if the operator is not alert to the presence of children. Children are attracted to lawn mowers and the mowing activity. NEVER assume children will stay where they were last seen. Be alert to avoid accidents.
SAFETY SERVICE: • Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. Use only an approved container. Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.
DIXON PROTECTION PLUS TWO YEAR LIMITED WARRANTY POLICY This warranty policy applies to all (30"), (36"), (42") mowers purchased on or after March 1 , 1990 . WARRANTY: The Dixon Protection Plus Warranty term is for a period of two (2) years from date of purchase.
SPECIFICATIONS Model ZTR 3303 CHASSIS: The monocoque design chassis of the 3000 Series Models incorporates CMC Laser and CNC brake processes to form t he twin 12 gauge side frames and 7 gauge transmission and engine base plate. BODY: All body parts are made of rotational molded polyethylene.
SPECIFICATIONS Model ZTR3304 CHASSIS: The monocoque design chassis of the 3000 Series Models incorporates CMC Laser and CNC brake processes to form the twin 12 gauge side frames and 7 gauge transmission and engine base plate. BODY: All body parts are made of rotational molded polyethylene.
SPECIFICATIONS Model ZTR 3362 CHASSIS: The monocoque design c hassis of the 3000 Series Models incorporates CNC Laser and CNC brake processes to form the twin 12 gauge side frames and 7 gauge transmission and engine base plate. BODY: All body parts are made of rotational molded polyethylene.
SEAT ADJUSTMENT INSTRUCTIONS Models ZTR 3303 - ZTR 3304 - ZTR 3362 1. Raise and push seat assembly forward. 2. Model ZTR 3303 - loosen four seat bolts, P/N 3077, and slide seat forward or backward to desired position. Models ZTR 3304 & ZTR 3362 - Loosen five nuts, P/N 3205, and slide seat forward or backward to desired position.
CONTROLS Page 12.
CONTROLS The Dixon ZTR has a unique transaxle that requires only two drive levers to control braking, turning, speed, and direction. On initial operation, set throttle speed on slow and operate with mower blade "OFF" To avoid "over - controlling" the mower, use a light touch on the drive levers.
TO GO FORWARD: From neutral position, gently push both drive levers forward. To increase speed, move levers farther forward. TO GO BACKWARD: From neutral position, gently pull both drive levers toward you. TURNING: Turning is controlled by moving one drive lever slightly forward or rearward of the other.
CONTROLS: BLADE DRIVE: Models ZTR 3303 - ZTR 3304 Located to left of operator. To engage the mower blade, turn lever on floor slowly to the "ON" position. To disengage mower blade, turn lever to the "OFF position. BLADE D RIVE: Model ZTR 3362 Located on control panel, on operator's right.
OPERATION INSTRUCTIONS The safe and successful operation of the 3000 Series Models will depend upon the operator having the correct knowledge of all controls used on the mower and making good judgements about the terrain to be mowed. NEVER allow anyone to operate the mower without complete knowledge of all controls and their functions.
OPERATION INSTRUCTIONS PARKING BRAKE SWITCH TEST: With parking brake in the OFF position, engine should not turn over or attempt to start when the key switch is moved to the start position. BLADE DRIVE S WITCH TEST: (Electric Clutch or Manual Drive) a.
OPERATION INSTRUCTIONS STARTING INSTRUCTIONS: 1. Move throttle control to "Choke" position if engin e is cold, full throttle if warm. 2. Insert ignition key and turn to "Start" position. When engine starts, release ignition key. Key will return to "Run" position.
OPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT: Mulching or recycling the grass cl ippings requires a totally different mowing approach than would be normal when side discharging or bagging the grass. There may be instances or conditions where it is not possible to hide all of the recycled or mulched clippings.
OPERA TION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENT: In order to achieve optimum performance when mowing with a grass catching attachment, please read and follow the tips listed below. 1. Set engine speed control to the wide open or full setting.
OPERATION INSTRUCTIONS SIDE DISCHARGE OF THE CLIPPINGS: In order to achieve op timum performance when side discharging the grass clippings, please read and follow the tips listed below. Additional information can be found in the troubleshooting guide on Page 31.
CAR E AND MAINTENANCE - 3000 SERIES MODELS This portion of the 3000 Series Models owners manual deals with normal service items which can be performed by the owner.
CARE AND MAINTENANCE - 3000 SERIES MODELS CUTTER BLADE MAINTENANCE: NOTE: Observe proper blade position prior to removal. 1. Safely raise front of mower. 2. Hold or block blade from turning. Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade.
DECK REMOVAL - MANU AL CLUTCH - MODELS ZTR 3303 & ZTR 3304: 1. Place cut height lever in lowest cut position. 2. Loosen belt keepers. 3. Remove deck drive belt from engine pulley. 4. Using a slight upward twisting motion, remove link from engagement handle.
CARE AND MAIN TENANCE - 3000 SERIES MODELS DECK REMOVAL - ELECTRIC CLUTCH - MODEL ZTR 3362: 1. Place cut height lever in lowest cut position. 2. Loosen nut on belt idler shock mount until belt can be removed from electric clutch pulley on the bottom of the engine.
CARE AND MAINTENANCE - 3000 SERIES MODELS FUEL SHUT OFF VALVE: The fuel shut off valve is located at the bottom rear of the fuel tank. Always turn the valve to the "OFF" position when the mower is stored or not in use.
CARE AND MAINTENANCE - 3000 SERIES MODELS HOT oil may cause burns. Allow engine to cool before draining oil. CHANGING THE ENGINE OIL: MODELS ZTR 3303 - ZTR 3304 - ZTR 3362 1. The "snap lock" oil drain valve is located on the left si de of the engine crankcase.
CARE AND MAINTENANCE - 3000 SERIES MODELS DRIVE SYSTEM ADJUSTM ENTS: Due to both the complex nature of the transmission and the number of special tools required for service, adjustments should be entrusted to your dealer. There are a number of simple owner service items which greatly influence the performance of the d rive system.
CARE AND MAINTENANCE - 3000 SERIES MODELS ELECTRICAL SYSTEMS: Keep all connections clean and tight. The serial number is located on frame at rear of engine, it will begin with DM. Refer to Warranty Registration Form (P/N 8288). See your Dixon dealer for replacement parts, warranty or service.
STANDARD SERVICE PARTS LIST MODELS ZTR 3303 & ZTR 3304: Sta ndard: P/N 2483 Hi - Lift: P/N 2484 Engine To Mower Deck: P/N 7725 Engine To Transmission: P/N 7650 P/N 1324 P/N 1351 - right side P/N 1.
TROUBLESHOOTING MOWER CUT QUALITY: There are many variables that can effect the cut quality of any rid ing mower. Type and conditions of grass, cut height setting, engine RPM and ground speed are some of the variables that interact creating differences in cut quality.
TROUBLESHOOTING DRIVE SYSTEM: SITUATION CAUSES REMEDY Mower pulls to one Drive adj ustment Consult your dealer for repair side or the other Poor driving Operation of mower Review operators section per.
TROUBLESHOOT ING ELECTRICAL SYSTEM: Circuit breaker engaged Push button to reset Consult your dealer for repair Battery discharge P oor connections on battery Battery water low Wrong battery installed.
OWNER INFORMATION DIXON INDUSTRIES, INC A BLOUNT COMPANY AIRPORT INDUSTRIAL PARK PO BOX 1569 COFFEYVILLE KS 67337 O945 316 251 2OOO FAX 316 251 4 117 DATE PURCHASED MOWER MODEL NUMBER PURCHASED FROM N.
The Engi ne Exhaust from this product contains chemicals known to the S tate O f California to cause cancer, birth defects or other reproductive harm. ® Dixon and ZTR are registered trademarks of Dixon Industries, Inc. WARNING: DIXON INDUSTRIES, INC.
An important point after buying a device Dixon ZTR 3362 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dixon ZTR 3362 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dixon ZTR 3362 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dixon ZTR 3362 you will learn all the available features of the product, as well as information on its operation. The information that you get Dixon ZTR 3362 will certainly help you make a decision on the purchase.
If you already are a holder of Dixon ZTR 3362, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dixon ZTR 3362.
However, one of the most important roles played by the user manual is to help in solving problems with Dixon ZTR 3362. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dixon ZTR 3362 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
