Instruction/ maintenance manual of the product ZEETER 422, 424 Dixon
Go to page of 17
OPERATOR’S MANUAL.
IMPORTANT The Dixon ZTR mower is both easy and fun to operate. However, any power mower must be operated properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower, read the operator's manual carefully, and become completely familiar with the controls.
SERIAL NUMBERS The lawn mower has three serial numbers: Mower Number — Located on frame at right rear transaxle mount. Transaxle Number — Located on transaxle. Engine Number — Located on engine. When ref erring to serial number on Warranty Registration, etc.
. ALWAYS SET PARKING BRAKE AND DISENGAGE BLADE OPERATION BEFORE DISMOUNTING..
IMPORTANT OPERATING INSTRUCTIONS Dixon ZTR mowers offer a new concept in mowing, providing unique maneuverability and ease. The following procedures will allow one to become familiar with the unique method of control very easily. 1. SET PARKING BRAKE — Be sure that drive levers are free and in the neutral position.
ALWAYS DISENGAGE BLADE OPERATION BEFORE DISMOUNTING. 9. Parking Brake: Parking brake is on right hand side of floor area and is engaged by pushing full forward with foot.
BODY ROMOVAL ZTR 422 - 424 1. Disconnect throttle cable from engine. 2. Remove four (4) control lever bolts and remove upper control levers. 3. Remove engaging handle by removing bolt and nut under handle. 4. Remove the two (2) attach nuts on floor of body and two (2) sheet metal screws at the rear of body.
ELECTRICAL SYSTEMS Keep ail connections clean and tight. Maintain the fluid in the battery at correct level. BODY The body may be washed wit h a mild detergent and waxed with any automotive type wax. TRANSAXLE For adjustment or repair confer with authorized Dixon dealer service department.
.
.
10.
.
.
<:> ' I PARTS LIST FOR 42" MODELS Part No. Description Part No. Description " Part No. Description 1000C Frame Weldment 1581 Brake Pedal Arm Weldment 4006 - 9 Bat tery - Ground Ca.
Part No. Description Part No. Description Part No. Description 4113 Wiring Kit 5028 Transaxle Bearing 6070 Engaging Idler Weldment 4114 Wiring Kit 503 5 Transaxle V - Pulley 6075 Engaging Idler Spacer.
OWNER INFORMATION Date Mower Purchased_ ___________________Mower Model Number ______________________ Mower Purchased from _____________________________________________________ dealer name & address Mower Serial Number________________________________Transaxle Serial Number _______________ ________ ______ Oil changed this date: 1 .
DIX ON INDUSTRIES, INC. BOX 494, COFFEYVILLE, KANSAS 67337 ® DIXON and ZTR are registered trademarks of Dixon Industries, Inc. 281 Litho in U.S.A..
An important point after buying a device Dixon ZEETER 422, 424 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dixon ZEETER 422, 424 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dixon ZEETER 422, 424 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dixon ZEETER 422, 424 you will learn all the available features of the product, as well as information on its operation. The information that you get Dixon ZEETER 422, 424 will certainly help you make a decision on the purchase.
If you already are a holder of Dixon ZEETER 422, 424, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dixon ZEETER 422, 424.
However, one of the most important roles played by the user manual is to help in solving problems with Dixon ZEETER 422, 424. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dixon ZEETER 422, 424 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
