Instruction/ maintenance manual of the product MP1 Dish Network
Go to page of 2
This should clear out any previously installed devices. Then, select Done . Re- connect the coaxial cable to the “Satellite In ” port on the back of the receiver . DISH ® Receiver Setup for MP1 ™ Antenna DISH receivers will often not show when they are on signal if they have incorrect “Check Switch ” information.
Input zip code of current location and dish type. Zip Code should be the zip code of your current location . Note that whenever you move the satellite antenna to a new location, you must enter the zip code of your new current location. On the display , Dish System should always be Dish 300.
An important point after buying a device Dish Network MP1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dish Network MP1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dish Network MP1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dish Network MP1 you will learn all the available features of the product, as well as information on its operation. The information that you get Dish Network MP1 will certainly help you make a decision on the purchase.
If you already are a holder of Dish Network MP1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dish Network MP1.
However, one of the most important roles played by the user manual is to help in solving problems with Dish Network MP1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dish Network MP1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
