Instruction/ maintenance manual of the product G4203X Directed Electronics
Go to page of 20
Responder One Remote Star t Owner's Guide © 2008 Directed Electronics, Vista, CA G4203X 2008-09.
.
Contents Government Regulations ....................................................................................5 W arning! Safety first .........................................................................................7 What is Included ..
4 © 2008 Directed Electronics. All rights reserved. Government Regulations This device complies with Par t 15 of FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may.
W arning! Safety first The following safety warnings must be obser ved at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer . When properly installed, this system can start the vehicle via a command signal from the remote control transmitter .
6 © 2008 Directed Electronics. All rights reserved. After the remote star t module has been installed, contact your authorized dealer to have him or her test the remote star t module by performing the Safety Check outlined in the product installation guide.
7 © 2008 Directed Electronics. All rights reserved. What is Included The control module • T wo 1-button transmitters • (P/N 7211X) A push-button programming switch • Y our warranty card • A shut-down toggle switch • Important Information Congratulations on the purchase of your remote star t keyless entr y sys- tem.
8 © 2008 Directed Electronics. All rights reserved. ➢ Battery Replacement Fr ont Elastomer contac t Fr ont Elastomer contac t Fr ont Elastomer contac t + + + Circuit Boar d Fr ont Elastomer contac t Fr ont Elastomer contac t Fr ont Elastomer contac t + + + Circuit Boar d Using a small slotted screw- 1.
9 © 2008 Directed Electronics. All rights reserved. Using Y our System ➢ Unlocking Only after the vehicle is remotely star ted via the transmitter , press and release the transmitter button for 1 second to unlock the vehicle’ s doors. The remote responds with 2 shor t beeps and the green LED on the re- mote flashes once.
10 © 2008 Directed Electronics. All rights reserved. Note: In order for the ignition controlled door locks to work, the feature must be turned on in programming. Note: If the ignition is turned on while the vehicle is remote started the doors do not lock until the remote star t shuts of f.
11 © 2008 Directed Electronics. All rights reserved. T o shut of f the remote start: While the vehicle is remote started press and hold the button on the remote for 3 seconds. The remote plays the remote start shut of f tones and the orange LED flashes 1 time.
12 © 2008 Directed Electronics. All rights reserved. ➢ Valet T ake-Over The V alet T ake-Over feature allows the vehicle to remain running after the key has been removed from the ignition.
13 © 2008 Directed Electronics. All rights reserved. Programming options Programming options control your system's normal operational set-up. Most options do not require additional par ts, but some may require installation labor . The following is a list of the programmable options, with the factor y settings in bold .
.
15 © 2008 Directed Electronics. All rights reserved. Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference. ✂ ✂ Quick Reference Guide T o remote star t the vehicle Press and release the transmitter button for 1-second.
.
17 © 2008 Directed Electronics. All rights reserved. Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’ .
18 © 2008 Directed Electronics. All rights reserved. WITHOUT LIMIT A TION, LIABILITY FOR THEFT , DAMAGE AND/OR V ANDALISM. THIS W ARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOV AL OR REINST ALLA TION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND.
.
G4203X 2008-09 Vista, CA 92081 www .directed.com © 2008 Directed Electronics—All rights reser ved The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available.
An important point after buying a device Directed Electronics G4203X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Directed Electronics G4203X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Directed Electronics G4203X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Directed Electronics G4203X you will learn all the available features of the product, as well as information on its operation. The information that you get Directed Electronics G4203X will certainly help you make a decision on the purchase.
If you already are a holder of Directed Electronics G4203X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Directed Electronics G4203X.
However, one of the most important roles played by the user manual is to help in solving problems with Directed Electronics G4203X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Directed Electronics G4203X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
