Instruction/ maintenance manual of the product 202 Directed Electronics
Go to page of 5
OWNER’S MANUAL Two-Way Active Crossover ® Model 202.
© 1999 Directed Electronics, Inc 1 © 1999 Directed Electronics, Inc 1. Please read the owner's manual carefully before you install the crossover.
© 1999 Directed Electronics, Inc 3 © 1999 Directed Electronics, Inc 1. Pick the correct frequency range switch settings for the high and low- pass filters. The X1 setting is used for subwoofer and mid-bass crossover applications. Use the X10 setting when using the model 202 for mid-bass/midrange and tweeter crossover applications.
5 © 1999 Directed Electronics, Inc LIMITED TWO YEAR CONSUMER WARRANTY Directed Electronics, Inc. (DEI) promises to the original purchase r , to replace this product should it prove to be defective in.
• SINGLE AND DUAL VOICE COIL SUBWOOFERS • COAXIAL SPEAKERS • COMPONENT SPEAKER SYSTEMS © 1999 Directed Electronics, Inc • Vista, CA 92083 • All Rights Reserved G 202 11/99 Always use a DEI .
An important point after buying a device Directed Electronics 202 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Directed Electronics 202 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Directed Electronics 202 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Directed Electronics 202 you will learn all the available features of the product, as well as information on its operation. The information that you get Directed Electronics 202 will certainly help you make a decision on the purchase.
If you already are a holder of Directed Electronics 202, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Directed Electronics 202.
However, one of the most important roles played by the user manual is to help in solving problems with Directed Electronics 202. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Directed Electronics 202 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
