Instruction/ maintenance manual of the product FXL18N Dimplex
Go to page of 4
FXL(N) FAN STORAGE HEATER RANGE MODELS: FXL18N - 2.6kW / 18kWh STORAGE & 1.5kW BOOST FXL24N - 3.4kW / 24kWh STORAGE & 1.5kW BOOST INSTALLATION AND OPERATING INSTRUCTIONS IMPORTANT PLEASE READ THIS LEAFLET CAREFULLY AND RETAIN FOR FURTHER USE.
INSTALLATION INSTRUCTIONS FAN/BOOST CIRCUIT STORAGE CIRCUIT PREPARATION The heater will arrive separately from its storage bricks, the following bricks will be required.
4. FAN SPEED SELECTION - At this point the installer must choose between Normal/ High Fan or permanent High Fan option. Option 1 - The heater is factory set at Normal Fan . The fan will therefore:- (a ) Run at NORMAL when the boost option is not selected.
OPERATING INSTRUCTIONS Heat Retention This storage heater takes in energy when electricity tariffs are low, and retains it in the insulated core. Automatic Input Control An automatic input control system varies the charge taken in response to weather conditions, taking into account the amount of energy already stored in the heater.
An important point after buying a device Dimplex FXL18N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dimplex FXL18N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dimplex FXL18N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dimplex FXL18N you will learn all the available features of the product, as well as information on its operation. The information that you get Dimplex FXL18N will certainly help you make a decision on the purchase.
If you already are a holder of Dimplex FXL18N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dimplex FXL18N.
However, one of the most important roles played by the user manual is to help in solving problems with Dimplex FXL18N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dimplex FXL18N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
