Instruction/ maintenance manual of the product EWM-SS-BLK Dimplex
Go to page of 15
PRACTICAL USER’S GUIDE FOR THE ELECTRIC WALL MOUNTED FIREPLACE MODEL NUMBER: EWM-COPPER EWM-SS-BLK Valued Customer, We are pleased that you have chosen to purchase an electric fireplace manufactured by Dimplex North America Limited.
CONTENTS P AGE 1 Import ant Instructions P AGE 2 W all Mount Inst allation P AGE 6 Operation P AGE 7 Remote Operation P AGE 8 Maintenance P AGE 10 W arranty.
QUICK REFERENCE GUIDE FOR THE ELECTRIC W ALL MOUNT FIREPLACE 1. Before using the electric wall mounted fireplace verify: • Are the circuit breakers for the unit on? • Are the light bulbs loose? (to check, follow the instructions for replacing the light bulbs under the maintenance section of this manual) 2.
IMPORT ANT INSTRUCTIONS RETAIN THIS USER’S GUID E FOR FUTURE REFERENCE When using electrical appliances, ba sic precautions s hould always be followed to reduce the risk of fire, electric shock, and injury to persons. 1. Read all instructions before using the wall mounted electric f ireplace.
NOTE A 15amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit breaker trips or the fuse blows on a regular basis when the heater is operating.
5. The wall-mounting bracket must be mounted to at least one wall stud (FIGURE 3) or into two wall studs (FIGURE 4) 6. When installing into two studs the wall anchor must be installed into the center location as indicated in FIGURE 3. 7. When installing into one st ud, use one of the three center locations as indicated in FIGURE 4.
4 FIGURE 3 FIGURE 4.
UNIT INSTALLATION CORD SECURING (VIEW FROM BACK) 5.
OPERATION The controls are located on the lower right si de of the wall mounted electric fireplace. (FIGURE 7) A. MAIN ON/OFF SWITCH The switch has two ON positions marked with and “ Manual ”. The “ Manual “ position is for manual operation. In this position the built-in r emote control is by- passed.
RESETTING THE TEMPERATURE CUTOFF SWITCH Should the heater overheat, an aut omatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching t he MAIN ON/OFF S WITCH to OFF and waiting 5 minutes before switching the unit back on.
MAINTENANCE WARNING Disconnect power before attempting any maintenanc e or cleaning to reduce the risk of fire, electric shock or damage to persons. LIGHT BULB REPLACEMENT Allow at least 5 minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin.
GLASS CLEANING The front glass is cleaned in the factory duri ng the assembly operation. During shipment, installation, handling, etc., the front glass may collect dust particles, these can be removed by dusting lightly with a clean dry cloth. To remove fingerprints or other marks, the glass can be cleaned with a damp cloth.
TWO YEAR LIMITED W ARRANTY Products to which this limited warranty applies This limited warranty applies to the following models of your ne wly purchased Dimplex electric fireplace EWM-COPPER, EWM-SS-BLK and to newly purchased Di mpl ex fir epl ace s urro unds (mantels) and trims.
What you must do to get serv ice under this limited warranty Defects must be brought to the at tention of Dimplex Technical Se rvice by contacting Dim plex at 1-888- DIMPLEX (1-888-346-7539), or 1367 Industria l Road, Cambridge Ontario, Canada N1R 7G8.
What Dimplex and its dealers and service agents are also not responsible for: IN NO EVENT WILL DIMPLEX , OR ITS DIRE CTORS , OFFICERS, OR AGENTS, BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY, WHETHER.
An important point after buying a device Dimplex EWM-SS-BLK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dimplex EWM-SS-BLK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dimplex EWM-SS-BLK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dimplex EWM-SS-BLK you will learn all the available features of the product, as well as information on its operation. The information that you get Dimplex EWM-SS-BLK will certainly help you make a decision on the purchase.
If you already are a holder of Dimplex EWM-SS-BLK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dimplex EWM-SS-BLK.
However, one of the most important roles played by the user manual is to help in solving problems with Dimplex EWM-SS-BLK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dimplex EWM-SS-BLK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
