Instruction/ maintenance manual of the product DFPI2311 Dimplex
Go to page of 17
PARTS AND SERVICE MANUAL FOR THE 23” INSERT FIREPLACE MODEL NUMBER: HFPI9280 DFPI2311.
TABLE OF CONTENTS O P E R A T I O N P A G E 1 PARTS DRAWING PAGE 5 P A R T S L I S T P A G E 6 WIRING SCHEMATICS PAGE 7 LIGHT BULB REPLACEMENT PAGE 8 MANUAL CONTROL ON/OFF SWIT CH REPLACEMENT PAGE 9 F.
1 HFPI9280, DFI2311 OPERATION Initializing The Remote Control 1. Turn on the electrical power at the circuit breaker. 2. Slide open the battery cover on th e back of the remote transmitter. 3. Install three AAA batteries into the remo te control. Replace the battery cover.
2 HFPI9280, DFI2311 Auto Mode Note When auto mode is activated the flame and heat will turn on. The heater will turn on and off to keep the room temperature the same as the remote contro ls set temperature. 1. Use the UP and DOWN buttons to se t the desired target temperature.
3 HFPI9280, DFI2311 Code selection If the current remo te control is interfering with the operation of other remote control devices (TV, VCR, garage doors etc.) T he code can be changed on the remote. To change code: 1. Remove the battery cover on the back of the remote control.
4 HFPI9280, DFPI2311 OPERATION Masonry Insert Manual Control 1. The masonry insert has a manual power ON/OFF switch located in the upper corner of the unit. 2. To operate press the switch once, to turn the unit on. A red light will illuminate to indicate the power is on.
5 HFPI9280, DFPI2311.
6 HFPI9280, DFPI2311 REPLACEMENT PARTS 23” FIREPLACE INSERT CATALOGUE NO. HFPI9280, DFPI2311 PART NO. 6900770259, 6900770159 MOD LEVEL: A MADE IN: CANADA REPLACEMENT PART REPLACEMENT PART NO. 1. LOG SET 0438200200RP 2. FLICKER MOTOR 2000140500RP 3. REFLECTOR ASSEMBY 5900080600RP 4.
7 HFPI9280, DFPI2311 WIRING DIAGRAM.
8 HFPI9280, DFPI2311 LIGHT BULB REPLACEMENT The light bulbs need to be replaced when you not ice a dark section of the flame. There are two bulbs under the log set whic h generate the flames and embers. Warning Disconnect the power before attempting any ma intenance or cleaning to reduce the risk of fire, electric shock or damage to persons.
9 HFPI9280, DFPI2311 If the unit was operating prior to servicing a llow at least 10 minutes for light bulbs and heating element to cool off to av oid accidental burning of skin. Disconnect power before attempting any main tenance or cleaning to reduce the risk of electric shock or damage to persons.
10 HFPI9280, DFPI2311 If the unit was operating prior to servicing a llow at least 10 minutes for light bulbs and heating element to cool off to av oid accidental burning of skin. Disconnect power before attempting any main tenance or cleaning to reduce the risk of electric shock or damage to persons.
11 HFPI9280, DFPI2311 If the unit was operating prior to servicing a llow at least 10 minutes for light bulbs and heating element to cool off to av oid accidental burning of skin. Disconnect power before attempting any main tenance or cleaning to reduce the risk of electric shock or damage to persons.
12 HFPI9280, DFPI2311 If the unit was operating prior to servicing a llow at least 10 minutes for light bulbs and heating element to cool off to av oid accidental burning of skin. Disconnect power before attempting any main tenance or cleaning to reduce the risk of electric shock or damage to persons.
13 HFPI9280, DFPI2311 If the unit was operating prior to servicing a llow at least 10 minutes for light bulbs and heating element to cool off to av oid accidental burning of skin. Disconnect power before attempting any main tenance or cleaning to reduce the risk of electric shock or damage to persons.
14 HFPI9280, DFPI2311 If the unit was operating prior to servicing a llow at least 10 minutes for light bulbs and heating element to cool off to av oid accidental burning of skin. Disconnect power before attempting any main tenance or cleaning to reduce the risk of electric shock or damage to persons.
15 HFPI9280, DFPI2311 If the unit was operating prior to servicing a llow at least 10 minutes for light bulbs and heating element to cool off to av oid accidental burning of skin. Disconnect power before attempting any main tenance or cleaning to reduce the risk of electric shock or damage to persons.
An important point after buying a device Dimplex DFPI2311 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dimplex DFPI2311 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dimplex DFPI2311 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dimplex DFPI2311 you will learn all the available features of the product, as well as information on its operation. The information that you get Dimplex DFPI2311 will certainly help you make a decision on the purchase.
If you already are a holder of Dimplex DFPI2311, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dimplex DFPI2311.
However, one of the most important roles played by the user manual is to help in solving problems with Dimplex DFPI2311. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dimplex DFPI2311 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
