Instruction/ maintenance manual of the product DFG3033 Dimplex
Go to page of 22
Owner ’ s Manual Model DFG3033 T o view the full line of Dimplex products, please visit www .dimplex.com 7210600100R02 IMPORT ANT SAFETY INFORMA TION: Always read this manual rst before attempting to install or use this replace.
2 www .dimplex.com T able of Contents Always use a qualied technician or service agency to repair this replace. ! NOTE: Procedures and techniques that are considered important enough to emphasize. CAUTION: Procedures and techniques which, if not carefully followed, will result in damage to the equipment.
3 W elcome & Congratulations Thank you and congratulations for choosing to purchase an electric replace from Dimplex, the world leader in electric replaces. Please carefully read and save these instructions. CAUTION: Read all instructions and warnings carefully before starting installation.
4 www .dimplex.com When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: ① Read all instructions before using the electric replace.
5 SA VE THESE INSTRUCTIONS hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, or ammable liquids are used or stored or where the unit will be exposed to ammable vapors. ⑬ Do not modify the electric repl ace.
6 www .dimplex.com IMPORT ANT INSTRUCTIONS CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
7 Quick Reference Guide ① Prior to the rst use of the replace verify the following: • Are the circuit breakers for the unit on? • Are the light bulbs in your replace loose? (T o check, follow the instructions for replacing the light bulbs under the Maintenance section of this manual.
8 www .dimplex.com Fireplace Installation CAUTION: Clearance for air circulation beneath the replace insert is provided by two (2) rubber feet. Do not install the replace insert directly on carpet or similar surfaces which may restrict air circulation.
9 Fireplace Installation Mark the desired location 3. on the oor and store the replace in a safe, dry and dust free location. Use studs to frame an 4. opening of 31 ¾ inches (807 mm) wide x 22 ¾ inches (578 mm) high x 9 ½ inches (241 mm) deep.
10 www .dimplex.com Fireplace Installation T ake the cables out from the 4. junction box, loosen the two wire twist nuts and remove the cord set (Figure 2). Route the power supply wire 5. through the knockout on supplied alternative junction box cover and secure with a wire clamp (not supplied) (Figure 3).
11 Operation Electric Fireplace Manual Control The manual controls for the replace are located in the upper right hand corner (Figure 5). A. Main On/Off Switch Supplies power to the 3 Position Manual Control Switch. B. 3 Position Manual Control Switch Remote (left position): The unit is operated with the remote control.
12 www .dimplex.com independent frequencies to prevent interference with other units. Battery Installation Depress tab on the battery 1. cover on the back of the remote control and remove battery cover (Figure 6). Install two (2) AAA batteries 2. into the remote control (included).
13 Operation Frequency Interference If the replace does not respond properly to the remote control, the remote operating frequency may have to be reset. The remote control can send another frequency code to the circuit board to eliminate interference.
14 www .dimplex.com Operation Figure 7 - Remote Control Functions A. Room T emperature B. Set T emperature C. Dimmer D. Flame Speed Control E. Sleep T imer F . Flame & Heat On/Off G. T emperature Down H. T emperature Up I. Dimmer Down J. Dimmer Up K.
15 Operation Figure 8 Unlocked Locked Child Lock T ab reached the heater will turn off. The heater will cycle on and off to maintain the desired set temperature. Child Lock (Figure 8) Depress tab on the battery 1. cover on the back of the remote control and remove the battery cover (Figure 6).
16 www .dimplex.com Maintenance Light Bulb Replacement Allow at least ve (5) minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin.
17 Maintenance that some of the glass media may fall out of the tray (Figure 9). Upper bulbs are located in 2. the upper left and upper right corners of replace (Figure 9). Remove the upper light cover 3. for each bulb (two (2) Philips screws each).
18 www .dimplex.com Maintenance Fireplace Surface Cleaning Use a cloth dampened with warm water only to clean painted surfaces of the electric replace.
19 shipment and, subject to the provisions of this warranty , Dimplex warrants such products to be free from defects in material and workmanship for a period of 1 year from the date of rst purchase of such products. W arranty services do not include in-home services.
20 www .dimplex.com W arranty product is located if the purchaser ’s site is beyond 30 miles (48 km) from the closest service depot of Dimplex’s dealer or service agent; and (ii) the purchaser is solely responsible for providing clear access to all serviceable parts of the product.
21 NO EVENT WILL DIMPLEX, OR ITS OFFICERS, DIRECTORS, OR AGENTS BE LIABLE FOR ANY DIRECT LOSSES, COSTS, OR DAMAGES THA T EXCEED THE PURCHASE PRICE OF THE PRODUCT . SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMIT A TION OF INCIDENT AL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMIT A TION OR EXCLUSION MA Y NOT APPL Y T O THE PURCHASER.
22 www .dimplex.com © 2012 Dimplex North America Limited Dimplex North America Limited 1367 Industrial Road Cambridge ON Canada N1R 7G8 1. Flicker Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000240200KIT 2. Heater Assembly (with cutout) .
An important point after buying a device Dimplex DFG3033 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dimplex DFG3033 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dimplex DFG3033 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dimplex DFG3033 you will learn all the available features of the product, as well as information on its operation. The information that you get Dimplex DFG3033 will certainly help you make a decision on the purchase.
If you already are a holder of Dimplex DFG3033, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dimplex DFG3033.
However, one of the most important roles played by the user manual is to help in solving problems with Dimplex DFG3033. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dimplex DFG3033 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center