Instruction/ maintenance manual of the product BFH24RB, BFH24RS, BFH24R Dimplex
Go to page of 4
Installation & Operating Instructions Base Unit Fan Heater Model: BFH24R, BFH24RB & BFH24RS 08/17337/3 Issue 3 APR ‘05 IMPORTANT: These instructions should be read and carefully retained by the user. Safety Warnings • DO NOT COVER OR OBSTRUCT the air inlet or outlet grille.
2. Pow er supply connection Check that the supply voltage details on the heater are in accordance with your electricity supply. A 2.5 metre length of inter-connecting cable is supplied.
Operation of Thermostat 1. The heater incorporates a variable thermostat which is controlled by a knob situated on the top right hand side of the front panel. The knob is marked *, 1 - 6, MAX, representing a temperature range of 5°C to 30°C. Lowest setting provides frost protection level.
Replacing 13amp fuse The 13amp fuse must be ASTA approved to BS1362. The fuse may be replaced by pulling out the fuse holder, marked ‘fuse’, on the remote switch assembly until the fuse is dislodged. The new fuse should then be located and held in position while the fuse holder is pushed back into position.
An important point after buying a device Dimplex BFH24RB, BFH24RS, BFH24R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dimplex BFH24RB, BFH24RS, BFH24R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dimplex BFH24RB, BFH24RS, BFH24R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dimplex BFH24RB, BFH24RS, BFH24R you will learn all the available features of the product, as well as information on its operation. The information that you get Dimplex BFH24RB, BFH24RS, BFH24R will certainly help you make a decision on the purchase.
If you already are a holder of Dimplex BFH24RB, BFH24RS, BFH24R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dimplex BFH24RB, BFH24RS, BFH24R.
However, one of the most important roles played by the user manual is to help in solving problems with Dimplex BFH24RB, BFH24RS, BFH24R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dimplex BFH24RB, BFH24RS, BFH24R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
