Instruction/ maintenance manual of the product DL 5000 Diamond Tech
Go to page of 8
OPERA TIONS MANUAL DL 5000 DIAMOND LASER BAND SAW DIAMOND TECH Innovations For Creativity.
Contents Y our Diamond Laser 5000 ™ has been shipped partially assembled. Carefully remove saw and parts from the packaging. 1-Band Saw Body 2-Cutting T able 3-Recirculating W ater Pump and V alve 4-Detachable W ater Reservoir 5-Straight Edge/Angle Cutting Guide 6-Adjusting Wrenches 7-Extra Diamond Laser Band Saw Blade Assembly Instr uctions A.
P AGE 2 - DL5000 INSTR UCTION MANUAL T able Alignment Screw Fig.2 Fig.3 Fig.5 Fig.6 Fig.7 Fig.4 Fig.8 B. Blade Installation Blade comes pre-installed; however should it become loose in shipment or need to be replaced, follow these instructions. 1) T urn power OFF and unplug from electrical outlet.
Band Saw Use and Maintenance A. Driv e Belt T ension Adjustment A loose drive belt may result in a noticeable loss of power to the blade wheels. 1) T o tighten the drive belt, turn saw OFF and unplug the saw from the electrical outlet. 2) Remove all screws securing rear panel encasing the motor (Fig.
1) T o adjust the rear roller bearings, use a small hex wr e nc h a nd loosen the set screw located on the top of the blade guide block. Slide the blade guide block backward or forward to achieve proper position (1/16” away from blade).
Quick Tips .
T roubleshooting Problem Cause .
All Diamond Laser 5000 Band Saw and accessories are manufactured to high quality standards .
An important point after buying a device Diamond Tech DL 5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Diamond Tech DL 5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Diamond Tech DL 5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Diamond Tech DL 5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Diamond Tech DL 5000 will certainly help you make a decision on the purchase.
If you already are a holder of Diamond Tech DL 5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Diamond Tech DL 5000.
However, one of the most important roles played by the user manual is to help in solving problems with Diamond Tech DL 5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Diamond Tech DL 5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
