Instruction/ maintenance manual of the product DL 5000 Diamond Power Products
Go to page of 8
DL5000 INSTRUCTION MANUAL DIAMOND TECH Innovations For Creativity OPERA TIONS MANUAL DL 5000 DIAMOND LASER BAND SA W.
DL5000 INSTRUCTION MANUAL Before Y ou Be gin Read and follow all instructions carefully. • After unpacking all components, assemble band saw on a firm level surface to prevent saw from tilting and rocking. • Be sure the power switch is in the OFF position before plugging in the band saw .
DL5000 INSTRUCTION MANUAL PAGE 2 - T able Alignment Screw Fig.2 Fig.3 Fig.5 Fig.6 Fig.7 Fig.4 Fig.8 B. Blade Installation Blade comes preinstalled; however should it become loose in shipment or need to be replaced, follow these instructions. 1) Turn power OFF and unplug from electrical outlet.
DL5000 INSTRUCTION MANUAL - PAGE 3 Band Saw Use and Maintenance A. Drive Belt T ension Adjustment A loose drive belt may result in a noticeable loss of power to th e blade wheels. 1) T o tighten the drive belt, turn saw OFF and unplug the saw from the electrical outlet.
DL5000 INSTRUCTION MANUAL PAGE 4 - 1) T o adjust the rear roller bearings, use a small hex wrench and loosen the set screw located on the top of the blade guide block. Slide the blade guide block backward or forward to achieve proper position (1/16” away from blade).
DL5000 INSTRUCTION MANUAL - PAGE 5 Quick Tips 1) When cutting, the highest blade speed will usually result in efficient and smooth cutting. Use a slower speed when working with delicate materials or making very tight turning radius. 2) Do not force materials into the blade.
DL5000 INSTRUCTION MANUAL PAGE 6 - T roubleshooting Problem : Blade jammed in work material. Cause : T wisted blade from forcing work materials into the blade. Solution : Before freeing any jammed materials, immediately turn OFF power switch and wait until all moving parts have stopped.
DL5000 INSTRUCTION MANUAL All Diamond Laser 5000 Band Saw and accessories are manufactured to high quality standards and are serviced by highly qualified technicians. Diamond Laser 5000 Band Saw is warranted to the original purchaser for one full year from the original purchase date.
An important point after buying a device Diamond Power Products DL 5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Diamond Power Products DL 5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Diamond Power Products DL 5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Diamond Power Products DL 5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Diamond Power Products DL 5000 will certainly help you make a decision on the purchase.
If you already are a holder of Diamond Power Products DL 5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Diamond Power Products DL 5000.
However, one of the most important roles played by the user manual is to help in solving problems with Diamond Power Products DL 5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Diamond Power Products DL 5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
