Instruction/ maintenance manual of the product S600 Diamond Audio Technology
Go to page of 16
Owners Manual 4 (110mm) 2-Way 5 (130mm) 2-Way 6 (160mm) 2-Way Systems covered: S400 · S500 · S600.
The serial number of your system is recorded here for your convenience. When requesting warranty/non-warranty service, please refer to this number. S/N:.
Dear V alued Customer, Congratulations on your pur chase of a Diamond Audio T echnolog y loudspeaker system. Y our new HEX Series ® system is comprised of loudspeakers and crosso vers tha t have been precision engineered to produce the highest quality audio system for your vehicle.
Before you begin Make sure you have all the needed parts to complete the installation: (2) HEXS.0ta or S.0ts Tweeters (2) HEX S4.0m, S5.
Speed Clips Gasket Screws Grille Crossover Tweeter Spring Clip Check your available mounting depth before installing your HEX components. Use extreme care when removing factory speakers, grilles and/or door panels. Be sure to install the supplied foam gaskets on the drivers to insure a good seal for maximum dynamic range.
In- In+ W- W+ T- T+ R- R+ Connections should first be made with the rear cover removed to allow for adjustment of the crossover settings. The tweeter level has jumper positions for +2dB, 0dB and -2dB attenuation. When you have chosen the final settings, replace the rear cover section and tighten the two hold- down screws.
The HEX Series 2-way systems S400, S500 and S600 include an RAF rear-fill output as part of the crossover design. The RAF output is unfiltered to maintain a correct phase relationship to the front stage, however, the output is attenuated by -10dB to optimize for typical vehicle size and length.
Diagram shows that by combining the S6.0mx3 System Add-On (available separately from your DAT dealer) with the S400 or S500 systems, a fully passive 3-way speaker system can easily be assembled. Optionally, the RAF output of the primary HEX cross- over may still be used to augment the front stage sound.
Thile/Small parameters for the HEXSeries drivers are shown above. Production toler- ances will vary slightly. Each production is individually check for adherence to specifica- tions. This assures you that a speaker set you may purchase in the future will sound as good as your current one.
S.0ta/S.0ts Alloy/Silk Dome Tweeter HEX Engineering Detail Drawings Mounting Depth Cutout Diameter Overall Diameter Recess Depth All Dims in mm[IN.
S4.0m HEX Cone Midrange .21 [5.2] 1.76 [44.8] 4.96 [126.0] 4.49 [114.0] 5.53 [140.5] 4.15 [105.5] .94 [23.8] 1.53 [38.8] 3.05 [77.5].
S5.0m HEX Cone Midbass .21 [5.2] 2.03 [51.5] 5.61 [142.5] 6.18 [157.0] 4.88 [124.0] 5.24 [133.0] 3.54 [89.9] 1.06 [26.8] 1.79 [45.5].
S6.0m HEX Cone Midbass/Woofer .21 [5.2] 2.30 [58.5] 6.28 [159.5] 6.85 [174.0] 5.35 [136.0] 5.91 [150.0] 3.79 [96.3] 1.11 [28.3] 2.07 [52.5].
This page intentionally blank..
L I M I T E D W A R R A N T Y S T A T E M E N T Diamond Audio Technology, Inc. (DAT) warrants all DAT products to be free of defects in material and workmanship for a period of one (1) year from the date of original purchase provided they are purchased from an authorized DAT retailer in the United States.
© 1999 Diamond Audio T echnology, Inc. - All rights reserved. Part No. 705-2026 Rev . B Diamond Audio Technology, Inc. 3030 Pennsylvania Ave. Santa Monica, CA 90404 T el: 310.
An important point after buying a device Diamond Audio Technology S600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Diamond Audio Technology S600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Diamond Audio Technology S600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Diamond Audio Technology S600 you will learn all the available features of the product, as well as information on its operation. The information that you get Diamond Audio Technology S600 will certainly help you make a decision on the purchase.
If you already are a holder of Diamond Audio Technology S600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Diamond Audio Technology S600.
However, one of the most important roles played by the user manual is to help in solving problems with Diamond Audio Technology S600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Diamond Audio Technology S600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
