Instruction/ maintenance manual of the product D3 Series Diamond Audio Technology
Go to page of 16
The D3 Series Amplifiers provide a wide range of power and features that make them an excellent choice for a variety of car audio sound system configurations. D3 Amplifiers use an unregulated power supply for good control of output power. This power supply design helps yield maximum power transfer with a minimum of heat loss.
The D3 Series Amplifiers provide a wide range of power and features that make them an excellent choice for a variety of car audio sound system configurations. D3 Amplifiers use an unregulated power supply for good control of output power. This power supply design helps yield maximum power transfer with a minimum of heat loss.
INPUT CONNECTIONS AND AUDIO CONTROL The following figures show the input/audio control end panels for each amplifier along with a key to show the layout. 1.RCA lnput jacks 2.Gain Control 3.Bass Boost Control 4.Crossover Frequency 5.X-Over Mode Switch 6.
INPUT CONNECTIONS AND AUDIO CONTROL The following figures show the input/audio control end panels for each amplifier along with a key to show the layout. 1.RCA lnput jacks 2.Gain Control 3.Bass Boost Control 4.Crossover Frequency 5.X-Over Mode Switch 6.
If you have any questions or need added help with your new D3 Amplifier , please feel free to call Diamond Technical Support at 1-866-328-2834. SYSTEM DIAGRAMS Low HIGH FULL Fig.5 In this application the amplifier is bridged for mono operation to drive a subwoofer The Diamond Audio D3 400.
If you have any questions or need added help with your new D3 Amplifier , please feel free to call Diamond Technical Support at 1-866-328-2834. SYSTEM DIAGRAMS Low HIGH FULL Fig.5 In this application the amplifier is bridged for mono operation to drive a subwoofer The Diamond Audio D3 400.
Mixed-Mode Satellite and Subwoofer System Set X-Over Mode to FULL. Low HIGH FULL NOTE Chart values based on 4 ohm speakers. Fig.7 The amplifier can be configured for a mixed-mode operation. The table provides component values to create a 6dB per octave crossover at specified frequencies.
Mixed-Mode Satellite and Subwoofer System Set X-Over Mode to FULL. Low HIGH FULL NOTE Chart values based on 4 ohm speakers. Fig.7 The amplifier can be configured for a mixed-mode operation. The table provides component values to create a 6dB per octave crossover at specified frequencies.
D3 400.4 SOURCE 2CH BASS 2CH 4CH LOW HIGH FULL LOW HIGH FULL Fig.9 ln this application, the D3 400.4 was used as a 4-channel amplifier to drive four full-range speakers in stereo. SOURCE 2CH BASS 2CH 4CH LOW HIGH FULL LOW HIGH FULL D3 400.4 Fig.10 ln this 4-channel system, the D3 400.
D3 400.4 SOURCE 2CH BASS 2CH 4CH LOW HIGH FULL LOW HIGH FULL Fig.9 ln this application, the D3 400.4 was used as a 4-channel amplifier to drive four full-range speakers in stereo. SOURCE 2CH BASS 2CH 4CH LOW HIGH FULL LOW HIGH FULL D3 400.4 Fig.10 ln this 4-channel system, the D3 400.
SOURCE 2CH BASS 2CH 4CH LOW HIGH FULL LOW HIGH FULL D3 400.4 Fig.11 The D3 400.4 can alse be used to drive a pair of stereo satellites and a single mono subwoofer. Note the filter settings Bridged Mono Channel 2-Channel Stereo System with Low-pass D3 400.
SOURCE 2CH BASS 2CH 4CH LOW HIGH FULL LOW HIGH FULL D3 400.4 Fig.11 The D3 400.4 can alse be used to drive a pair of stereo satellites and a single mono subwoofer. Note the filter settings Bridged Mono Channel 2-Channel Stereo System with Low-pass D3 400.
Fig.13 The amplifier can be configured for a mixed-mode operation on either channels 1/2 or 3/4 amplifier sections. The table provides component values to create a 6dB per octave crossover at specified frequencies. Use the same frequency for both LP and HP crossovers.
Fig.13 The amplifier can be configured for a mixed-mode operation on either channels 1/2 or 3/4 amplifier sections. The table provides component values to create a 6dB per octave crossover at specified frequencies. Use the same frequency for both LP and HP crossovers.
LIMITED W ARRANTY STA TEMENT Diamond Audio Technology , Inc. (DAT) warrants all DAT products to be free of defects in material and workmanship for a period of one (1) year from the date of original purchase provided they are purchased from an authorized DAT retailer in the United States.
LIMITED W ARRANTY STA TEMENT Diamond Audio Technology , Inc. (DAT) warrants all DAT products to be free of defects in material and workmanship for a period of one (1) year from the date of original purchase provided they are purchased from an authorized DAT retailer in the United States.
An important point after buying a device Diamond Audio Technology D3 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Diamond Audio Technology D3 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Diamond Audio Technology D3 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Diamond Audio Technology D3 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Diamond Audio Technology D3 Series will certainly help you make a decision on the purchase.
If you already are a holder of Diamond Audio Technology D3 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Diamond Audio Technology D3 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Diamond Audio Technology D3 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Diamond Audio Technology D3 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
