Instruction/ maintenance manual of the product D3 1000.1 Diamond Audio Technologies
Go to page of 12
D3 400.2 | D3 500.4 | D3 600.1 | D3 1000.1 AMPLIFIER INST ALL A TION MANUAL.
2 Congratulations! Thank you f or choosing a Diamond Audio T echnologies D3 Series amplier . We sincerely believe that DA T products offer you outstanding per - formance and value. DAT products are engineered and produced with the highest quality materials and incorporate the latest technology .
3 Fr equency Response: 20Hz to 20KHz +/-3 dB Signal to Noise Ratio: > 95dBA (20 to 20kHz) Channel Separation 50dB THD+N(T otal Harmonic Distortion + Noise) < 0.2% (Output-1W 4 Ohms) RCA Input Sensitivity: 150mV to 4V RCA Input Impedance: > 20K Ohms Min to Max V oltage r equir ements 10.
4 Connections and Contr ols This section describes how all of the terminals and adjustments of D A T D3 Series ampliers function. D3 400.2 2-Channel Amplifier 218 x 57.
5 RCA Input and Pass-Thru Output - These RCA jacks allo w for a normal Left and Right channel signal input. Simpl y connect to the sourc e unit using RCA type audio cable s, keeping them away from power wiring wherever possible. On the 4 channel amplifiers (D3 500.
6 Installation Guidelines T ools and Supplies Listed bel ow ar e the tools and supplies needed to compl ete this ins tallation: • V olt/Ohm Meter • Wir e stripper s and wir e cutters • #2 Philli.
7 Mounting Locations Engine Compartment Never mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warr anty . T runk Mounting Mounting the amplier vertic ally will pr ovide adequate cooling of the amplier .
8 3) T rim the power cabl e within 18 inches (45.7mm) of the positive battery post and splice in a in-line fuse holder . DO NOT inst all the fuse at this time. 4) Strip 1/2 inch (12.7mm) from the battery end of the power cable and crimp a lar ge ring terminal to the cabl e.
9 25A 25A 25A FUSE REM GND +12V BRIDGE L R – – + + + – Connecting Multiple Speak ers If you must connect more than one speaker per channel, there ar e two methods in which to do so: Series or Parall el.
10 Installing the Remote Le vel Contr oller The D3 600.1 and the D3 1000.1 come packaged with a r emote le vel contr ol. This allows you to contr ol the lev el by attenuating the amplitude or increasing (up to the maximum set-point) of the amplier’ s input gain contr ol.
11 Adjustment of Built-In Cros sover (All Models) Placing the switch in the HP position sets the amplier to the High Pass mode, enabling fr equencies above the cut off point to pass. Placing the switch in the LP position sets the amplier to the Low Pass mode, enabling frequencies belo w the cutoff point to pas s.
041807 Diamond Audio W arr anty Diamond Audio T echnol ogies, LL C (D A T) warrant s this pr oduct to be fr ee fr om def ects in mate- rial and workmanship for a period of one (1) year fr om the original date of pur chase pr ovided it was pur chased from an authorized DA T r etail er within the United States.
An important point after buying a device Diamond Audio Technologies D3 1000.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Diamond Audio Technologies D3 1000.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Diamond Audio Technologies D3 1000.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Diamond Audio Technologies D3 1000.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Diamond Audio Technologies D3 1000.1 will certainly help you make a decision on the purchase.
If you already are a holder of Diamond Audio Technologies D3 1000.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Diamond Audio Technologies D3 1000.1.
However, one of the most important roles played by the user manual is to help in solving problems with Diamond Audio Technologies D3 1000.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Diamond Audio Technologies D3 1000.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
