Instruction/ maintenance manual of the product APSUSB201 Airlinkplus
Go to page of 12
Quick Installation Guide Model # APSUSB201 Ve r. 1 A.
Section 1 W arning: Bef ore beginning the installation, ma ke sure that the printer driver is in stalled locally on ea ch computer that will print through the print server. Otherwise, the print server will not be configured success fully . Plea se refer to your printer’s manual f or instruction s on how to install the printer driver .
Ste p 1 Connect one end of the Ethernet ca ble to the RJ-45 port of the print server a nd atta ch the other end of the cable to a router. Ste p 2 M a ke sure all the printers are powered OFF , then connect one end of the USB cable to the USB port of the print server a nd atta ch the other end of the cable to the USB port of the printer .
Section 3 Installing Software Ste p 1 Insert the provided CD a nd wait for the setup menu to a ppear . Ste p 2 Click on In stall Utility . Note: If the setup menu does not a ppear automatically after you have in serted the CD, go to Start , Run , type D:PS Utilitysetup.
Step 4 Click Next . Ste p 5 Click Yes . Ste p 6 Click Finish ..
Section 4 Running PS Utility Note: If your TCP/IP setting from Se ction 1 ha s an IP Address of 192.168.1.x (where x is a number between 2 - 253 ) AND your Default Gateway is 192.168.1.1 , you may skip this section a nd proceed to Section 5, V erifying Network Connection .
Ste p 4 Refer ba ck to the TCP/IP setting from Section 1. Note the first three sets of numbers from the IP Addre ss you wrote down a nd enter them into the re spective fields. For exa mple : If your computer’s IP Address is 192.168.0 .100 , enter the sa me three numbers: 192.
V erifying Network Connection Step 1 Click on Start , Run . Step 2 For Windows 95/98/ME type comma nd a nd click OK . For Windows 2000/XP , type cmd an d click OK . Ste p 3 At the command prompt, type ping a nd the IP Address of the print server a nd press Enter .
Section 6 Running PS Wizard W arning: M a ke sure you have installed the printer driver locally on every computer in your network before running the PS Wizard. Otherwise, the PS Wizard will not run properly. Be sure to run the PS Wizard on all the computers in your network.
Section 4 Step 3 Click Next . Ste p 4 Select the printer that is connected to the print server a nd click Next ..
Ste p 5 Double-click on the Print Server Na me , select the Printer Port Na me , a nd click Next . Ste p 6 Click Reboot (f or Windows 95/98/ME) or Finish (for Windows 2000/XP). Ste p 7 Run the PS Wizard on all the computers in your network that will use the print server .
Section 8 T e chnical Support E-mail: support@airlinkplus.com T oll Free: 1-888-746-3238 W eb Site: www .airlinkplus.com Note: This print server doe s not support most multi-functional printers (i.e. printers with sca nner , fax, copier , etc. function s).
An important point after buying a device Airlinkplus APSUSB201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlinkplus APSUSB201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlinkplus APSUSB201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlinkplus APSUSB201 you will learn all the available features of the product, as well as information on its operation. The information that you get Airlinkplus APSUSB201 will certainly help you make a decision on the purchase.
If you already are a holder of Airlinkplus APSUSB201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlinkplus APSUSB201.
However, one of the most important roles played by the user manual is to help in solving problems with Airlinkplus APSUSB201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlinkplus APSUSB201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
