Instruction/ maintenance manual of the product DW250/DW270 DeWalt
Go to page of 7
INSTRUCTION MANUAL GUIDE D'UTILISATION MANUAL DE INSTRUCCIONES INSTRUCTION MANUAL DW250/DW270 V.S.R. Drywall Screwdriver DW250/DW270 Tournevis pour murs secs DW250/DW270 Destornillador para tabla.
FIG. 5 Maintenance CLEANING With the motor running, blow dirt and dust out of all air vents with dry air at least once a week. Wear safety glasses when performing this. Exterior plastic parts may be cleaned with a damp cloth and mild detergent. Although these parts are highly solvent resistant, NEVER use solvents.
IF YOU HAVE ANY QUESTIONS OR COMMEN"'(S ABOUT THIS OR ANY DEWALT TOOL, CA~L US TOLL FREE AT: 1-800-4-DEWAL T (1-800-433-9258) ADJUSTING COLLAR BELT CLIP REVERSING LEVER ALUMINUM DEPTH LOCATOR TRIGGER.
Safety Instructions For All Tools . KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. . CONSIDER WORK AREA ENVIRONMENT. Don't expose power tools to rain. Don't use power tools in damp or wet locations. Keep work area well lit.
. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation.
Depth Adjustment (Fig. 4J 1. Rotate adjustment collar. Clockwise rotation will provide deeper seating of screws. 2. Test drive a fastener in scrap material to determine if fastener is correctly seating. 3. Further adjustment may be necessary to increase or decrease the fastener depth.
FIG. 7 r-- I B , ADJUSTMENT COLLAR I I .J CLUTCH - ASSEMBLY CLUTCH HOUSING (left hand thread) Accessories Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center.
An important point after buying a device DeWalt DW250/DW270 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeWalt DW250/DW270 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeWalt DW250/DW270 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeWalt DW250/DW270 you will learn all the available features of the product, as well as information on its operation. The information that you get DeWalt DW250/DW270 will certainly help you make a decision on the purchase.
If you already are a holder of DeWalt DW250/DW270, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeWalt DW250/DW270.
However, one of the most important roles played by the user manual is to help in solving problems with DeWalt DW250/DW270. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeWalt DW250/DW270 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
