Instruction/ maintenance manual of the product C1700SS 3M
Go to page of 24
3M Touch Systems Proprietary Information 3M ™ MicroTouch ™ Display C1700SS Installation Guide Read and understand all safety information contained in this document before using this product.
2 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information The information in this document is subject to change without notice.
3M™ MicroTouch™ Display C1700SS Installation Guide 3 3M Touch Systems Proprietary Information Content s Chapter 1 Overview Important Safety Information ......................................................................................5 Important Notes .
4 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information Chapter 5 Maintenance and Troubleshooting Maintaining Your Touch Display..............................................................................21 Touch Sensor Care and Cleaning .
3M™ MicroTouch™ Display C1700SS Installation Guide 5 3M Touch Systems Proprietary Information CHAPTER 1 Overview Congratulations on the purchase of your touch display, and welcome to the world of 3M Touch Systems — a world where using a computer is as simple as touching the sensor.
6 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information WARNING To avoid the risk of fire which could result in serious injury or death: • Do not remove the cover or back of the display.
3M™ MicroTouch™ Display C1700SS Installation Guide 7 3M Touch Systems Proprietary Information Important Notes • Plug power cord into appropriate power source. • Plug power cord into a grounded receptacle. • When unplugging power supply cord, pull on plug not cord.
8 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information Technical Support is available Monday through Friday 8:30 a.m. to 5:30 p.m. with limited call back service after 5:30 p.m. until 8:00 p.m . US Eastern Standard Time – 9 a.
3M™ MicroTouch™ Display C1700SS Installation Guide 9 3M Touch Systems Proprietary Information CHAPTER 2 Introduction to Flat-Panel Displays Overview The 3M Touch Systems product line of Flat-Panel Displays offers the C1700SS Display for kiosk, ATM, and industrial enclosures.
10 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information Native V ideo Resolution A flat-panel display should be used only at the resolution dictated by the number of pixels on the panel.
3M™ MicroTouch™ Display C1700SS Installation Guide 11 3M Touch Systems Proprietary Information CHAPTER 3 Setting Up Y our C1700SS Display This chapter describes how to set up and integrate your 3M™ MicroTouch™ C1700SS Display into a touch application.
12 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information Unpacking Your Touch Display Carefully unpack the carton and inspect the contents.
3M™ MicroTouch™ Display C1700SS Installation Guide 13 3M Touch Systems Proprietary Information Access to the Video Controls The controls for adjusting the video disp lay are located on the back of the C1700SS Display. These buttons let you display th e on-screen menu and adjust the phase, image position, contrast, and brightness.
14 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information Table 1. Applicable Display Mode and Refresh Rate Display Mode Refresh Rate (Hz) VGA (640 x 480) 60 75 85 SVGA (800 x 600) 56 60 75 85 XGA (1024 x 768) 60 75 85 SXGA (1280 x 1024) 60 75 Table 2.
3M™ MicroTouch™ Display C1700SS Installation Guide 15 3M Touch Systems Proprietary Information 2. Connect one end of the video cable to the video connector on the display. Connect the other end to the video card in your computer. 3. Connect one end of the touch sensor cable (either serial or USB) to the display.
16 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information Windows® Vista Windows® 2000 Windows® XP Windows® 9x Windows® NT Controllers MT 7 X X X All curr.
3M™ MicroTouch™ Display C1700SS Installation Guide 17 3M Touch Systems Proprietary Information CHAPTER 4 Adjusting the V ideo Display Your C1700SS Display has several control buttons and an on-screen menu for adjusting the video display. For example: • You can adjust the pixel clock and phase to eliminate noise.
18 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information There is also a STANDBY button next to the LED that can be used to put the display into standby mode. OSD Controls Pressing MENU will pull up the On Screen Display menu, as shown below.
3M™ MicroTouch™ Display C1700SS Installation Guide 19 3M Touch Systems Proprietary Information Frequency Setting If the Frequency setting of your image is not fine-tuned, you may observe periodic vertical bars of video noise. These bars of noise are usually adjusted out when an Auto Adjust is performed.
20 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information The utility sub-menu will supply information on the current video signal being received. It will also allow you to reset the display to the factory default video settings.
3M™ MicroTouch™ Display C1700SS Installation Guide 21 3M Touch Systems Proprietary Information CHAPTER 5 Maintenance and T roubleshooting If you have a problem setting up or using your display, you may be able to solve it yourself.
22 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information Display Installation Problems No image displayed (blank screen) Is the display receiving power? • Check that the computer’s power cable is connected properly and securely into a grounded electrical outlet.
3M™ MicroTouch™ Display C1700SS Installation Guide 23 3M Touch Systems Proprietary Information Troubleshooting the Touch Sensor If you are experiencing problems with the touch sensor, check the following list of common installation errors. Table 3.
24 3M™ MicroTouch™ Display C1700SS Installation Guide 3M Touch Systems Proprietary Information • Ctick This equipment has been tested and found to comply within limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
An important point after buying a device 3M C1700SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M C1700SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M C1700SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M C1700SS you will learn all the available features of the product, as well as information on its operation. The information that you get 3M C1700SS will certainly help you make a decision on the purchase.
If you already are a holder of 3M C1700SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M C1700SS.
However, one of the most important roles played by the user manual is to help in solving problems with 3M C1700SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M C1700SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
