Instruction/ maintenance manual of the product D25213K DeWalt
Go to page of 12
1 ® D251 1 2(K) D251 1 3K D251 1 4K D252 1 3K.
2 Copyright D E WALT English 6 Ⱥড় 13 ०༹ዐ࿔ 20 ݏ༹ዐ࿔ 27 34.
3 A 11 10 6 7 9 5 4 3 1 2 11 10 6 7 9 5 1 3 4 D251 1 2(K) D251 1 4K D252 1 3K D251 1 3K 4 8.
4 B2 D E C 4 5 4 5 6 12 7 10 91 1 B1.
5 F1 3 F2 G H 3 13 6 8 8.
6 ENGLISH HEAVY DUTY ROTARY HAMMER DEILL D251 1 2(K)/D251 1 3K/D251 1 4K/D252 1 3K Congratulations! You have chosen a D E WALT tool. Years of experience, thorough product development and innovation make D E WALT one of the most reliable partners for professional power tool users.
7 ENGLISH D251 12( K ) D251 13K L pA (sound pressure) dB(A)* 90.5 90.5 L WA (acoustic power) dB(A) 99 99 D25114K L pA (sound pressure) dB(A)* 90.5 L WA (acoustic power) dB(A) 99 * at the operator’s ear Take appropriate measures for the protection of hearing.
8 ENGLISH The tool will do the job better and safer at the rate for which it was intended. Do not force the tool. Warning! The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury.
9 ENGLISH Your D E WALT tool is double insulated in accordance with EN 50144; therefore no earth wire is required. Using an extension cable If an extension cable is required, use an approved extension cable suitable for the power input of this tool (see technical data).
10 ENGLISH We recommend to use professional accessories only. • Clean and grease the bit shank. • Insert the bit shank into the tool holder (6). • Push the bit down and turn it slightly until it fits into the slots. • Pull on the bit to check if it is properly locked.
11 ENGLISH Be aware of the location of pipework and wiring. Apply only a gentle pressure to the tool (approx. 5 kg). Excessive force does not speed up drilling but decreases tool performance and may shorten tool life. Do not drill or drive too deep to prevent damage to the dust cover.
12 ENGLISH • Insert the appropriate screwdriver bit. When driving slotted head screws always use bits with a finder sleeve. • Gently press the variable speed switch (1) to prevent damage to the screw head. In reverse (LH) rotation the tool speed is automatically reduced for easy screw removal.
An important point after buying a device DeWalt D25213K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeWalt D25213K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeWalt D25213K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeWalt D25213K you will learn all the available features of the product, as well as information on its operation. The information that you get DeWalt D25213K will certainly help you make a decision on the purchase.
If you already are a holder of DeWalt D25213K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeWalt D25213K.
However, one of the most important roles played by the user manual is to help in solving problems with DeWalt D25213K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeWalt D25213K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
