Instruction/ maintenance manual of the product 50-665 DeWalt
Go to page of 12
INSTRUCTION MANUAL 1 1 / 2 H . P . Dust Collector (Model 50-665) D ATED 8-8-99 P A R T NO. 1342493 'Delt a International Machinery Corp. 1999 Shown with Accessory Dust Collector Drum.
2 T ABLE OF CONTENTS SAFETY RULES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 IMPORT ANT SAFETY RULES W oodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery , there are cert ai n hazards involved with the operation of the product. Using the machine with respect and caution will considerably lessen the pos si - bility of personal injury .
4 IMPORT A N T SAFETY RULES F O R DUST COLLECT O R S INTRODUCTION Dust Collectors work by moving large volumes of air at lower suction pressures than vacuum cleaners.
5 1 . Blower and Motor Assembly 2 . Vacuum Hose 3 . Cylinder 4 . Dust Bag Elbow 5 . Hose Clamp s ( 2 ) 6 . Dust Bag 7 . Dust Bag Clamp 8 . Hardware for Mounting Inlet Elbows, Includes: 3/8-16 x 1-1/4 H e x Head Screws (2), Flat W ashers (4), Lockwashers (2), and Locknut s 9 .
6 ASSEMBL Y 1 . Place gasket (A) Fig. 3, on bottom of motor and blower assembly (B). Align four holes in gasket with holes in motor and blower assembly and assemble cover ( C ) Fig. 3, to gasket and motor and blower assembly with four hex head screws, flat washers, lockwashers, and locknut s (D).
7 Fig. 7 Fig. 8 Fig. 9 Fig. 1 1 Fig. 10 5 . Position the remaining inlet elbow (K) Fig. 8, at the underside of dust collector lid (C) a s shown. A l i g n t h e mounting holes in inlet elbows (K) Fig. 8, with screws (J) assembled to upper inlet elbow (H) shown in Fig.
8 CAUTION: Never remove safety grid for any reason except to perform maintenance procedures. There is a high speed blower wheel inside the blower housing that can amput ate fingers, grab loose clothing or neckties. Make cert ain the dust collector is discon - nected from the power source before performing any maintenance procedures .
9 Fig. 17 1 0 . Insert the bag clamp (Z) Fig. 16, through the loop s o f the dust bag (A). 11 . Clamp dust bag (A) Fig. 17, to bag elbow (V) a s shown by fastening bag clamp (Z). Fig. 16 Z A A Z V Fig. 18 Fig. 19 1 2 . Assemble reducer (B) Fig. 18, over the end of inlet elbow (H).
10 ON/OFF SWITCH The ON/OFF switch is conveniently located on the side of the motor . T o turn the dust collector ON push the switch (A) Fig. 22, upward to the ON position.
11 LOCKING SWITCH I N T H E O F F POSITION W e suggest when the dust collector is not in use that the ON/OFF switch be locked in the OFF position. This can be done by grasping the switch toggle (B) Fig. 23, and pulling it out of the switch (A) as shown.
Delt a Building T rades and Home Shop Machinery T w o Y ear Limited W arranty Delt a will rep air or replace, at it s expense and at it s option, any Delt a machine, machine p a r t , or machine acces.
An important point after buying a device DeWalt 50-665 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeWalt 50-665 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeWalt 50-665 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeWalt 50-665 you will learn all the available features of the product, as well as information on its operation. The information that you get DeWalt 50-665 will certainly help you make a decision on the purchase.
If you already are a holder of DeWalt 50-665, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeWalt 50-665.
However, one of the most important roles played by the user manual is to help in solving problems with DeWalt 50-665. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeWalt 50-665 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
