Instruction/ maintenance manual of the product SB-2-540 DeVillbiss Air Power Company
Go to page of 20
Service Bulletin SB-2-540 OPERA TION MANUAL TRANS-TECH ® GRA VITY FEED SPRA YGUN English: Pages 2-9 MANUAL DE OPERACIÓN COMP ACT – PISTOLA PUL VERIZADORA POR GRA VEDAD TRANS-TECH ® Español: Pág.
Page 2 SB-2-540 IMPORTANT: Read and follow all instruc- tions and SAFETY PRECAUTIONS before using this equipment. DESCRIPTION The Compact Gravity feed Spraygun Kit complies to ATEX regulations 94/9/EC, protection level; II 2 G X, Suitable for use in Zones 1 and 2 .
Page 3 SB-2-540 Patent No. 2372465 (GB) Ref. No. Description Part Number Qty. Options 1 Air Cap/Retaining ring COM-510 SP-100-510-K 1 +2 Nozzle SP-200S-**-K 1 14, 18, 22 e.
Page 4 SB-2-540 INSTALLATION Important: To ensure that this equipment reaches you in first class condition, protective coatings have been used. Flush the equipment through with a suitable solvent before use. 1. Attach air hose to connector (13). Recommended hose size 8 mm bore.
Page 5 SB-2-540 1. Remove Adjusting Knob (7), Spring (8), and Needle (9). 2. Loosen Housing (10). 3. Remove Housing (10) and Airvalve Spring. 4. Remove Valve (11). 5. Using Service Tool SPN-7, engage groove behind the Valve Seat. 6. Remove Valve Seat.
Page 6 SB-2-540 12. Fit Valve Seat to Gunbody. 13. Remove Rear Airvalve Seal from housing (10) with a hooked instrument. 14. Fit new Seal to Service Tool. 15. Fit Seal to Housing (10). 16. Replace Valve (11). 17. Replace Valve Spring and screw in Housing (10).
Page 7 SB-2-540 *Most common problem. Left or right side horn holes plugged. Dirt on left or right side of fluid tip. Remedies for the top-heavy, bottom-heavy, right-heavy, and left-heavy patterns: 1. Determine if the obstruction is on the air cap or the fluid tip.
Page 8 SB-2-540 Tighten. Replace cup gasket. Clean. Adjust gun or reduce fluid flow. Mix properly or apply light coats. Hold gun at right angle to work and adapt to proper gun technique. Check distance. Normally approx. 8". Reduce air pressure and check spray pattern.
Page 9 SB-2-540 NIOSH-Certified for respiratory protection in atmospheres not immediately dangerous to life. Consists of : 1 - Piercing Tool, 48 - Disposable Liners, 48 - Drain Bushings OMX-70-K48 Paint Cup Liner Kit Allows quick & easy clean-up. (1) Wall mount bracket included with GH-407.
Página 10 SB-2-540 IMPORTANTE: Lea y siga todas las instrucciones y Precauciones de Seguridad antes de utilizar este equipo. DESCRIPCIÓN El Kit de Pistola Pulverizadora por Gravedad Compact cumple las normas ATEX 94/9/CE, nivel de protección; II 2 G X, Adecuado para el uso en las Zonas 1 y 2 .
Página 11 SB-2-540 Patente Nº 2372465 (GB) Nº Número Ref. Descriptión de Pieza Cant Opciones 1C asquillo de aire / Anillo de SP-100-510-K 1 retención COM-510 +2 Pico de fluido SP-200S-**-K 1 14, 18, 22 ej.
Página 12 SB-2-540 INSTALACIÓN Importante: Para asegurarse de que este equipo llega a usted en condiciones óptimas, se han utilizado recubrimientos protectores. Enjuague el equipo con un disolvente adecuado antes de su uso. 1. Acople el manguito de aire al conector (13).
Página 13 SB-2-540 1. Retire el pomo de ajuste (7), el muelle (8), y la aguja (9). 2. Afloje el alojamiento (10). 3. Retire el alojamiento (10) y el muelle de la válvula de aire. 4. Retire la válvula (11). 5. Usando la herramienta de manteni-miento SPN-7, enganche la muesca detrás del asiento de la válvula.
Página 14 SB-2-540 12. Coloque el asiento de válvula en el cuerpo de la pistola. 13. Retire la junta de la válvula de aire del alojamiento (10) con un instrumento que tenga gancho. 14. Instale una junta nueva en la herramienta de manten- imiento. 15.
Página 15 SB-2-540 *Problemas más comunes. Agujeros en el lado izquierdo o derecho de la horquilla obstruidos. Suciedad en el lado izquierdo o derecho de la punta del líquido. Corrección de los patrones pesados en la parte superior, inferior, el lado derecho e izquierdo.
Página 16 SB-2-540 Apriete. Reemplace la guarnición de la cubeta. Limpie. Ajuste la pistola o reduzca el flujo de fluido. Mezcle debidamente o aplique capas livianas. Sostenga la pistola en un ángulo correcto para trabajar y adáptela a una técnica debida.
Página 17 SB-2-540 Certificados por NIOSH para protección respira- toria en atmósferas que no implican riesgo inmediato para la vida. Compuesto por: 1 herramienta perforadora, 48 – forros desechables, 48 – Boquillas de descarga.
Page 18 SB-2-540 NOTES.
Página 19 SB-2-540 NOTAS.
Page 20 SB-2-540 ITW Industrial Finishing DeVilbiss has authorized distributors throughout the world. For tech- nical assistance or the distributor nearest you, see listing below. U.S./Canada Technical Service Office: 195 Internationale Blvd., Glendale Heights, IL 60139 Toll-Free Telephone: 1-888-992-4657 (U.
An important point after buying a device DeVillbiss Air Power Company SB-2-540 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeVillbiss Air Power Company SB-2-540 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeVillbiss Air Power Company SB-2-540 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeVillbiss Air Power Company SB-2-540 you will learn all the available features of the product, as well as information on its operation. The information that you get DeVillbiss Air Power Company SB-2-540 will certainly help you make a decision on the purchase.
If you already are a holder of DeVillbiss Air Power Company SB-2-540, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeVillbiss Air Power Company SB-2-540.
However, one of the most important roles played by the user manual is to help in solving problems with DeVillbiss Air Power Company SB-2-540. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeVillbiss Air Power Company SB-2-540 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
