Instruction/ maintenance manual of the product ASW316 Airlink101
Go to page of 10
Quick Inst allation Guide 16-Port 10/100Mbp s Fast Ethernet Switch Model# ASW316 Ve r. 1 A.
1 T rademarks Copyright © 2009 Airlink101® Airlink101® is a registered trademark. All other trademarks belong to their respective proprietors. Copyright Statement No part of this publication ma y b.
2 1 Introduction Congratulations on your purc hase of the 16-Port 10/100Mbps Fast Ethernet Switch! It is an easy-to-install network switch which helps you to extend your network structure quickly and reliably . Purpose This Quick Installation Guide tells you how to inst all your Switch and how to connect it to your Ethernet network.
3 1.2 Panels 1.2.1 Front Panel The front p anel of the Switch consists of LED indicators, and 16 10/100Mbps port s. The figure below shows the front p anel of the Switch. Figure 1-1 Front Panel view of the Switch • 10/100Mbps Port s (Port 1~16): These port s support 10/ 100Mbps, and can operate in Half/Full Duplex transfer modes.
4 NOTICE: Do not envelop Radiator Fan wh ile the Switch is working. 1.2.3 LED Indicators information The front p anel LEDs provi de instant status feedback and help monitoring and troubleshooting when needed.
5 • Port 1~16 10/100M St atus LEDs St atus LED Color Solid Blinking Off LINK/ ACT Green The respective port is successfully connected to an Ethernet network.
6 Port s • 16 x 10/100Mbps TX Auto-Negotiation RJ45 Port Access Method • CSMA/CD T ransmission Method • S tore and Forward MAC Address T able • 8K Built-in Buffer • 1.
7 performance. When installing, ta ke the following into your consideration. 2.1 Installation Follow the guidelines below to install the Switch: Install the Switch in a fairly cool and dry place. See the T echnical S pecifications for the acceptable te mperature and humidity operating ranges.
8 power source automatically . 3 Connecting the Switch This section describes how to connect the Switch to your 10/100Mbps Fast Ethernet network. 3.1 Connection Y our network device (i.e. computer , switch, IP Camera, V oIP) can be connected to any port of the Switch via a two-pair Category 5 Cable or above.
9 4 Technical Support E-mail: support@airlink101.com T oll-Free: 1-888-746-3238 Web Site: www .air link101.com *Actual throughput varies. Net work cond itions and env ironmental factors as well as network overhead lo w er actual data throughput rate. Copyright © 2009 AirLink101.
An important point after buying a device Airlink101 ASW316 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink101 ASW316 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink101 ASW316 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink101 ASW316 you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink101 ASW316 will certainly help you make a decision on the purchase.
If you already are a holder of Airlink101 ASW316, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink101 ASW316.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink101 ASW316. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink101 ASW316 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
