Instruction/ maintenance manual of the product AICP310 Airlink101
Go to page of 14
Quick Installation Guide Power Over Ethernet Network Camera Model # AICP310 Ver. 1A.
This Quick Installation Guide onl y provides basic in structions. For detailed information on using this product and th e software IPView Pro, please refer to the User’s Manual on the supplied CD.
Note: If the autorun screen does n ot appear automatically, go to Start , Run , type D:WizardSetup.exe (where D is the letter of your CD drive) and click OK .
Step 4 Click Yes to accept the Licen se Agreement. Step 5 Click Nex t to accept the default Destination Folder..
Step 6 Click Finish to complete the installation. Using the Setup Wizard Step 1 Go to Start > (All) Programs > AirLink101 IP Camera Se tup Wi zard > AirLink101 IP Camera Setup Wizard .
Step 2 Select the IP Camera you want to c onfigure from the list and click on the Wizard button..
Step 3 If the Camera’s default IP address i s on a different subn et, the followin g message will appear. Cli ck Yes to continue. If you do not receive this message, skip to Step 6 . Step 4 Enter admin for both the Admin ID and Password and cli ck OK .
Step 6 Enter admin for both the Admin ID and Password field and click Next . Optionally, you can change the password by checki ng on the Change box and entering the new password.
Step 7 If you need to change the Camera’s IP address because an other network device is already using t he same address, you can a ssign a new address here and click Next . Step 8 Verify that all the fiel ds are correct and click Restart to save the settings and reboot the camera.
Viewing Images Step 1 At the Setup Wizard, select the desir ed camera from the li st and click on the Web Config button. Step 2 Enter the username and passwo rd for the network camera.
Step 3 The web based viewing page will appea r. You can view live video by selecting either the ActiveX Mode (Internet Explorer only) or the Jav a Mode (Internet Explorer and Netscape).
Step 4 If you select ActiveX Mode, you may be prompt to install the ActiveX Control. Click on the yellow bar to on the top of the screen and click on Install ActiveX Control .
Step 6 You can focus the camera by turning the camera’ s lens clockwise or counter-cloc kwise. Note: ActiveX and/or Java Applet must be installe d and enabled on your Web Browser (Internet Explorer or Net scape ) before you can view the live videos.
Technical Support E-mail: support@ airlink101.com Toll Free: 1-888-746-3238 Website: www.airlink101.com *Actual data throughput will vary. Network conditi ons and environmental factors lower actual data throughput rate. Specifications are subject to change without not ice.
An important point after buying a device Airlink101 AICP310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink101 AICP310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink101 AICP310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink101 AICP310 you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink101 AICP310 will certainly help you make a decision on the purchase.
If you already are a holder of Airlink101 AICP310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink101 AICP310.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink101 AICP310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink101 AICP310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
