Instruction/ maintenance manual of the product REM200T Desa
Go to page of 16
ARL LOGO G 004 ® IMPORTANT: Read and understand this manual before assembling, starting, or servicing heater. Improper use of heater can cause serious injury.
2 106068 POR T ABLE FORCED AIR HEA TER 200,000 BTU/HR • Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alco- hol, or other highly flammable fuels.
3 106068 OWNER’S MANUAL 1. Remove all packing items applied to heater for shipment. 2. Remove all items from carton. 3. Check items for shipping damage.
4 106068 POR T ABLE FORCED AIR HEA TER 200,000 BTU/HR WARNING: Use only kero- sene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels. Do not use heavy fuels such as No.
5 106068 OWNER’S MANUAL THEOR Y OF OPERA TION The Fuel System: The air pump forces air through the air line. The air is then pushed through the burner head nozzle. This air causes fuel to lift from the tank. A fine mist of fuel is sprayed into the combustion chamber.
6 106068 POR T ABLE FORCED AIR HEA TER 200,000 BTU/HR Item How Often How To Fuel tank Flush every 150-200 hours See Storing, Transporting, or of operation or as needed Shipping Air output and Replace .
7 106068 OWNER’S MANUAL WARNING: Never service heater while it is plugged in, operat- ing, or hot. Severe burns and electrical shock can occur. TROUBLESHOOTING OBSERVED FAULT Heater ignites, but fla.
8 106068 POR T ABLE FORCED AIR HEA TER 200,000 BTU/HR SER VICE PROCEDURES UPPER SHELL REMOVAL 1 . Remove screws along each side of heater using 5/16" nut-driver . These screws attach upper and lower shells together . 2. Lift upper shell off. 3. Remove fan guard.
9 106068 OWNER’S MANUAL PUMP PRESSURE ADJUSTMENT 1. Remove pressure gauge plug from filter end cover . 2. Install accessory pressure gauge (part number HA1 180). 3. Start heater (see Operation , page 5). Allow motor to reach full speed. 4. Adjust pressure to 6.
10 106068 POR T ABLE FORCED AIR HEA TER 200,000 BTU/HR 9. Blow compressed air through face of nozzle. This will free any dirt in nozzle area. 10. Inspect nozzle seal for damage. 1 1. Replace nozzle into burner head and tighten firmly (80-1 10 inch-pounds).
11 106068 OWNER’S MANUAL PUMP ROTOR (Procedure if Rotor is Binding) 1. Remove upper shell (see page 8). 2. Remove filter end cover screws using 5/16" nut-driver . 3. Remove filter end cover and air filters. 4. Remove pump plate screws using 5/16" nut-driver .
12 106068 POR T ABLE FORCED AIR HEA TER 200,000 BTU/HR ILLUSTRA TED PA R T S BREAKDOWN REM200T Motor and Pump Assembly 7-1 7-8 Burner Head Assembly 7-7 7-3 7-4 7-5 7-6 10-16 10-17 10-15 10-18 10-14 10.
13 106068 OWNER’S MANUAL P ARTS LIST REM200T 200,000 Btu/Hr This list contains replaceable parts used in your heater. When ordering parts, be sure to provide the correct model and serial numbers (from the model plate), then the part number and description of the desired part.
14 106068 POR T ABLE FORCED AIR HEA TER 200,000 BTU/HR 1 2 3 4 WHEELS AND HANDLE PARTS LIST KEY PART PART NO. NUMBER DESCRIPTION QTY. 1 HA2204 Handles 2 2 M12345-33 Screw, #10-24 x 1 3 / 4 "8 3 M.
15 106068 OWNER’S MANUAL White Black Black Blue Green Power Plug 120V/60Hz Photocell Spark Plug Ignitor Flame-Out Control B Reset Button R Red Red Motor Blue White White White White White Red Red Green Terminal Board Red Black Relay Fuel Valve Green/Yellow Thermostat WIRING DIAGRAM Note: Use only original replacement parts.
W ARRANTY AND REP AIR SERVICE WARRANTY SERVICE Should your heater require service, return it to your nearest authorized service center. Proof of purchase must be presented with the heater. The heater will be inspected. A defect may be caused by faulty materials or workmanship.
An important point after buying a device Desa REM200T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Desa REM200T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Desa REM200T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Desa REM200T you will learn all the available features of the product, as well as information on its operation. The information that you get Desa REM200T will certainly help you make a decision on the purchase.
If you already are a holder of Desa REM200T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Desa REM200T.
However, one of the most important roles played by the user manual is to help in solving problems with Desa REM200T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Desa REM200T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
