Instruction/ maintenance manual of the product AIC250 Airlink101
Go to page of 14
Ve r . 1 B Quick Inst allation Guide Model # AIC250 SkyIPCam 250 Network Camera.
Section 1 Getting S tarted Note: Before using the IP Camera, you’ll need to perform the following tasks: 1. Connect the IP Camera to your network. 2. Install the Setup Wizard. 3. Gather information about your local network address. 4. Configure the IP Camera using the Setup Wizard.
Section 2 Installing the Setup Wizard Step 1 Insert the provided CD and wait for the autorun screen to appear . Step 2 Click on Install Wizard . Note: If the autorun screen does not appear automatically , go to S tart , Run , type D:autorun.exe (where D is the letter of your CD drive) and click OK .
Step 4 Click Ye s to accept the License Agreement. Step 5 Click Next to accept the default Destination Folder . Step 6 Click Finish to complete the installation.
Section 3 Gathering Information Note: Before using the Setup Wizard, you’ll need to take note of your local network address. Step 1 Click on Start , Run , and type command (for Windows 95/98/ME) or cmd (for Windows 2000/ XP) and click OK . The command prompt will appear .
Section 4 Using the Setup Wizard Step 1 Go to S tart > (All) Programs > AirLink101 IP Camera Setup Wizard . Step 2 Select the IP Camera you want to configure from the list and click on the Wizard button.
Step 3 If the Camera’s default IP Address is on a different subnet, the following message will appear . Click Y es to continue. Note: If you do not receive this message, skip to Step 9 . S tep 5 In the IP Address field, change the first three numbers to match your local network address.
Step 6 Enter the Subnet Mask and Gateway fields with exactly the same values as you got from running ipconfig . Click OK to continue. Step 7 After the Camera has rest arted, click the Exit button to close the Setup Wizard. Step 8 S tart the Setup Wizard again and make sure the Current IP Address field displays the new IP Address.
Step 9 The Setup Wizard appears asking you to change the Admin ID and Password. The default Admin ID and Password is admin . Step 10 Enter admin for both the Admin ID and Password field, click on the Change checkboxes and enter the New ID and New Password and click Next .
Step 1 1 If you need to change the Camera’s IP Address because another network device is already using the same address, you can assign a new address here and click Next . Step 12 V erify all the fields are correct and click Rest art to save the settings and reboot the Camera.
Section 5 V iewing Images Step 1 At the Setup Wizard, select the desired camera from the list and click on the Web Config button. S tep 2 The default page appears. Y ou can view live video by selecting either the ActiveX Mode (Internet Explorer) or the Java Mode (Internet Explorer and Netscape).
Note: ActiveX and/or Java Applet must be installed and enabled on your Web Browser (Internet Explorer or Netscape) before you can view the live videos. For more information, please refer to the User’s Manual on the provided CD. The IP Camera is ready for use now .
Section 6 T echnical Support E-mail: support@airlink101.com T oll Free: 1-888-746-3238 Web Site: www .airlink101.com.
Copyright © 2005 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of A irLink101.
An important point after buying a device Airlink101 AIC250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink101 AIC250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink101 AIC250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink101 AIC250 you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink101 AIC250 will certainly help you make a decision on the purchase.
If you already are a holder of Airlink101 AIC250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink101 AIC250.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink101 AIC250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink101 AIC250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
