Instruction/ maintenance manual of the product AEN-U25W Airlink101
Go to page of 17
2.5” USB 2.0 Enclosure Box Model # AEN-U25W User’s Manual Ver. 2.0.
2 Table of Contents 1. Introduction ................................................................................................................................. 3 1.1 Package Contents ..............................................................
3 1. Introduction Thank you for purchasing this 2.5” USB 2.0 Enclosure Box. The En closure Box provides an easy way to add removable disk storage space to your computer. The Hi-Speed USB 2.0 interface ensures fast and reliabl e connection between the external drive and the computer.
4 2. Hard Drive Inst allation This section provides instructions on how to install a hard drive to the Enclosure Box. Step 1 Use the provided screwdriver to remove the four screws on th e Enclosure Box. Step 2 Slightly lift the upper cover and slide it forward to unhook the latches.
5 Step 3 Remove the bottom cover in the same manner . If you find it hard to lift the plastic holder, press it slightly inward. Step 4 Unscrew the two screws that hold the circ uit board and remove it from the plastic holder. Remove the sticker that is on the circuit board as well.
6 Step 5 Attach a 2.5" hard drive to the circui t board's IDE connector wit h the label of the hard drive facing up. Make sure t he IDE pins are fully inserted. Step 6 Replace the circuit board and the hard dr ive back to the plastic holder.
7 Step 7 Turn the plastic holder over. Use th e provided screws and the screws removed in Step 4 to secure the hard drive onto the holder. Step 8 Replace the bottom cover to the holder and then replace the upper cover. Be sure to hook the latches when replacing the covers.
8 3. Driver Inst allation for Windows 98SE This Enclosure Box supports Plug-and-Play for Windows ME, 2000, XP, and Mac OS. If you are using Windows 98SE, please refer to the following steps for installing the driver. Step 1 Connect the Enclosure Box to the comput er and insert the provided Driver CD to the CD-ROM drive.
9 Step 3 Select Search for the best driver for your device (Recommended) and click Next . Step 4 Select the Specify a location check box and click Browse to your CD-ROM drive and open the Driver/Win98SE folder.
10 Step 5 Click Next to install the driver. Step 6 Click Finish to complete the driver installation..
11 4. Inst allation V erification To verify your installation, please follow the steps below. 4.1 Windows 98SE Go to Control Panel > System > Device Manager and look for USB Mass Storage Device under Universal Serial Bus controllers . If it is listed, you have successfully installed the Enclosure Box.
12 4.2 Windows ME/2000/XP Go to Control Panel > System > Device Manager and look for USB Mass Storage Device under Universal Serial Bus controllers .
13 4.3 Mac OS 10.x Go to Apple System Profiler > Devices and Volumes . If you see the Enclosure Box listed under USB Information , you have successfully installed the Enclosure Box.
14 5. Hard Drive Usage Now you are ready to use the attached hard drive as an external storage device. A brand new hard drive must be formatted and partitioned first. Y ou can use Windows Disk Management utility in Windows XP/2000, Ma c built-in partition utility , or other disk management software as required to perform disk-related tasks.
15 Under Mac OS Drag the corresponding USB disk icon that represent s the hard drive to the trash can. When prompted, click OK and unplug the Enclosure Box from your computer. 6. Note on USB Cable The supplied USB cable has two Type A Connectors labeled A1 and A2 and a Mini Type B Connector labeled B .
16 7. S pecifications Standards • USB2.0 HDD Support • 2.5” IDE HDD Ports • 1 Mini USB 2.0 Type B receptacle • 1 Power port Power Mode • Bus-powered (USB) • Self-powered (optional adapter, 5V/2.
17 T echnical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web Site: www.airlink101.com * Actual data throughput will vary. Network conditions and environm ental factors lower actual data throughput rate. Specificati ons are subject to change without notice.
An important point after buying a device Airlink101 AEN-U25W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink101 AEN-U25W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink101 AEN-U25W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink101 AEN-U25W you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink101 AEN-U25W will certainly help you make a decision on the purchase.
If you already are a holder of Airlink101 AEN-U25W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink101 AEN-U25W.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink101 AEN-U25W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink101 AEN-U25W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
