Instruction/ maintenance manual of the product UG-ASW224-1103 Airlink
Go to page of 20
AirLink+ 1 24-Port 10/100Mbps Ethernet Switch User Guide 24-Port 10/100Mbps Ethernet Switch User Guide UG-ASW224-1 103.
24-Port 10/100Mbps Ethernet Switch User Guide 2 AirLink+ FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules.
AirLink+ 3 24-Port 10/100Mbps Ethernet Switch User Guide required for safe operation of the equipment is not compromised. • Mechanical Loading Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.
24-Port 10/100Mbps Ethernet Switch User Guide 4 AirLink+.
AirLink+ 5 24-Port 10/100Mbps Ethernet Switch User Guide T able of Contents About this Guide ............................................. 6 Purpose ...................................................................... 6 T erms & Usage ..........
24-Port 10/100Mbps Ethernet Switch User Guide 6 AirLink+ About This Guide Congratulations on your purchase of the 24-port 10/ 100Mbps Ethernet Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package.
AirLink+ 7 24-Port 10/100Mbps Ethernet Switch User Guide Introduction This chapter describes the features of the Switch and some background information about Ethernet/Fast Ethernet switching technology.
24-Port 10/100Mbps Ethernet Switch User Guide 8 AirLink+ Switching T echnology Another approach to pushing beyond the limits of Ethernet technology is the development of switching technology. A switch bridge Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments.
AirLink+ 9 24-Port 10/100Mbps Ethernet Switch User Guide characterized by higher latencies. Routers are also used to segment LANs. However, since routers are expensive, difficult to setup, and require intensive maintenance, they are relatively impractical for the network.
24-Port 10/100Mbps Ethernet Switch User Guide 1 0 AirLink+ anytime later without needing to change the Switch or reconfigure the network. The Switch combine dynamic memory allocation with store- and-f.
AirLink+ 1 1 24-Port 10/100Mbps Ethernet Switch User Guide Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: • One .
24-Port 10/100Mbps Ethernet Switch User Guide 1 2 AirLink+ Figure 1. Attach Brackets to Switch When installing the Switch on a level surface, attach the rubber feet to the bottom of each device. The rubber feet cushion the hub and protect the hub case from scratching.
AirLink+ 1 3 24-Port 10/100Mbps Ethernet Switch User Guide Then, use screws provided with the equipment rack to mount each switch in the rack (see Figure 2). Figure 2. Attach Switch to Rack External Components This section identifies all the major external components of the switch.
24-Port 10/100Mbps Ethernet Switch User Guide 1 4 AirLink+ Figure 3. Switch Front Panel Powe r 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 LINK 100 Mbps ACT 13 14 15 16 1234 17 18 1.
AirLink+ 1 5 24-Port 10/100Mbps Ethernet Switch User Guide LED Indicator Panel Figure 4 shows the Switch’s LED panel. The LED indicator panel contains the following indicators: • Power (PWR) Power (PWR) Power (PWR) Power (PWR) Power (PWR) This indicator lights green when the switch is receiving power.
24-Port 10/100Mbps Ethernet Switch User Guide 1 6 AirLink+ Figure 5. AC Power Connector AC Power Connector Rear of Switch end node is Network Interface Card (NIC) or switches and hubs. Rear Panel The AC power connector is located on the rear panel and is a three-pronged connector that supports the power cord (see Figure 5).
AirLink+ 1 7 24-Port 10/100Mbps Ethernet Switch User Guide T echnical Specifications T ables 1 to 3 provide Switch specifications. IEEE 802.3 10 Base-T ethernet IEEE 802.
24-Port 10/100Mbps Ethernet Switch User Guide 1 8 AirLink+ 100 to 240 V AC , 50- or 60-Hz inter nal univ ersal power supply Specification Feature 6.4 watts (maximum) Operating: 0˚ to 40˚ C Storage: .
AirLink+ 1 9 24-Port 10/100Mbps Ethernet Switch User Guide T echnical Support E-mail: support@airlinkplus.com T oll Free: 1-888-746-3238 W eb Site: www .
24-Port 10/100Mbps Ethernet Switch User Guide 2 0 AirLink+ Copyright 2003 AirLink+. All rights reserved. AirLink+, the stylized AirLink+ logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink+.
An important point after buying a device Airlink UG-ASW224-1103 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink UG-ASW224-1103 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink UG-ASW224-1103 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink UG-ASW224-1103 you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink UG-ASW224-1103 will certainly help you make a decision on the purchase.
If you already are a holder of Airlink UG-ASW224-1103, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink UG-ASW224-1103.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink UG-ASW224-1103. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink UG-ASW224-1103 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
