Instruction/ maintenance manual of the product C36EMW Desa
Go to page of 15
DESA INTERNATIONAL 2701 INDUSTRIAL DRIVE P/N 108771-01 P.O. BOX 90024 REV D BOWLING GREEN, KY 42101-9004 6/02 www.desatech.com SAVE THIS BOOK This book is valuable.
- 1 - For more information, visit www.desatech.com CONTENTS 1. INTRODUCTION ------------------------------------------------------------- PG. 2 2. SELECTING LOCATION ------------------------------------------------------------- PG. 2 3. MINIMUM CLEARANCES ------------------------------------------------------------- PG.
-2 - For more information, visit www.desatech.com INTRODUCTION BEFORE BEGINNING THE INSTALLATION OF THE FIREPLACE, READ THESE INSTRUCTIONS THROUGH, COMPLETELY. ♦ This DESA fireplace and its components are safe when installed according to this installation m anual.
- 3 - For more information, visit www.desatech.com STEP 3: Set the fireplace direc tly in front of this opening and slide the u nit back un til the nailing flanges to uch the side framing. STEP 4: Check the level of th e fireplace and shim with sheet metal if necessary.
- 4 - For m ore information, visit www.desatech.com OUTSIDE AIR KIT (MODEL AK-6) The installation of an out side air kit should be performed during the rough framing of the fireplace due to the nature of its location. Outside combustion air is accessed through the mobile hom e floor (Refer to AK-6 Installation Instructions for details).
-5 - For more information, visit www.desatech.com ASSEMBLY AND INSTALLATION OF THE DOUBLE WALL CHIMNEY SYSTEM Each double wall chim ney section is consist of a galvanized outer pipe, a stainless steel inner flue pipe and a wire spacer. The pipe sections must be assem bled independently as the chimney is installed.
- 6 - For more information, visit www.desatech.com If the adapter is needed, secure it onto the fi restop using holes provided (see figure 10). The row of holes on the sides of the thimble i s provided to allow for pitch variances. Position t he firestop assembly and thi mble to desired angl e and secure with screws provided.
- 7 - For m ore information, visit www.desatech.com FLASHING INSTALLATION (V6F-8DM or V12F-8DM) Determine t he flashing to be used with the roof opening chart . Slide flashing over pipe until base is flat against roof. Replace as many shingles as needed t o cover exposed area and flashing base.
-8 - For more information, visit www.desatech.com CHASE INSTALLATIONS Instructions for chase in stallati ons are included with the chase style termination chosen. In a multiple chase in stallation, be sure to provide adequate distance between term inations to prevent smoke spillage from one termination to another.
- 9 - For more information, visit www.desatech.com IMPORTANT: The glass must be allowed to warm sl owly and evenly. The tempered glass will withstan d a gradual temperature rise to 550 degrees Fahrenheit, which is more than a normal fire will generate.
- 10 - For more information, visit www.desatech.com STEP 4: Repack insulation around gas line and into sleeve opening. Seal any gaps between gas li ne and refractory knockout hole with refractory cement or comm ercial furnace cement. Install the gas applian ce or cap-off gas line if desired.
- 11 - For more information, visit www.desatech.com ILLUSTRATED PARTS.
- 11a - For more information, visit www.desatech.com ILLUSTRATED PARTS ITEM # PART # DESCRIPTION QTY. ITEM # PART # DESCRIPTION QTY. 1 54002 HOMEOWNER'S GUIDE 1 *36 11125 SCREW, #8 x 1/2 6 2 1066.
- 12 - For more information, visit www.desatech.com CONT ENT S M W8K M W 9K 8' vent kit 9' vent kit 36-8DM 36" Double W all Pipe 22 24-8DM 24" Double W all Pipe 10 18-8DM 18" .
- 12a - For more information, visit www.desatech.com PART NUMBER REFERENCE TABLE* *Part numbers listed on this chart on the same line and identified by the sam e description are interchangeable and listed as “same as”. Each part so listed may be substituted for the other part num bers under that listing.
An important point after buying a device Desa C36EMW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Desa C36EMW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Desa C36EMW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Desa C36EMW you will learn all the available features of the product, as well as information on its operation. The information that you get Desa C36EMW will certainly help you make a decision on the purchase.
If you already are a holder of Desa C36EMW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Desa C36EMW.
However, one of the most important roles played by the user manual is to help in solving problems with Desa C36EMW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Desa C36EMW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
