Instruction/ maintenance manual of the product CLASSIC PLUS 14 Denso
Go to page of 26
T echnical Services Department DSCA P/N: LA990009-1217 Fourth Issue: April 2003 GAC P/N: LA484007-1431 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOL Products only to the extent stated in its of ficial written warranties.
OPERA TION MANUAL CLASSIC PLUS 14 and CLASSIC PLUS 26.
ii.
iii TABLE OF CONTENTS FOREWORD ............................................................................................ 1 Definition of T erms .......................................................................... 1 GENERAL WARNINGS & CAUTIONS .
iv.
1 FOREWORD Congratulations on pur chasing the MovinCool portable air conditioner . This manual explains how to assemble, install, operate, and maintain the MovinCool Classic Plus 14 and Classic Plus 26 portable air condi- tioning units.
2 GENERAL W ARNINGS & CAUTIONS • All electrical work, if necessary , should only be performed by qualified electrical personnel. Repair to electrical components by non-certified technicians may result in personal injur y and/or damage to the unit.
3 INVENTOR Y & ASSEMBL Y Inventory After unpacking your MovinCool unit, please check to make sur e you have the following items: ❏ Classic Plus 14 or Classic Plus 26 MovinCool Unit (1) ❏ Cool .
4 INVENTOR Y & ASSEMBL Y Assembly CAUTION: Befor e assembling make sure the unit is on a flat, level surface and the casters ar e in the LOCKED position. (Both the Classic Plus 14 and Classic Plus 26 MovinCool units have locking swivel casters in the front only .
5 INST ALLA TION Choosing and Installation Site CAUTION: Following are some pr ecautions to consider before choosing your installation site. Please review car efully as improper installation may r esult in personal injury or damage to the unit. • Do not use the unit in areas wher e leakage of flammable gas may occur .
6 INST ALLA TION (cont.) Moving the Unit Unlock the casters and push the MovinCool unit fr om the front panel edge to a flat, level surface and set the casters back to the LOCKED position.
7 INST ALLA TION (cont.) Plugging in the Unit • Check the pr ongs and sur face of the power cor d plug for dust/dirt. If dust and/or dirt are pr esent, wipe off with a clean, dry cloth. • Check the power cor d, plug and prongs for damage or excess play .
8 FEA TURES Both models feature: • An electronic contr ol panel which allows the user to control the unit’ s operation easily . • Dual fan speeds (either High or Low) in both COOL and Fan Only modes. •A digital display that indicates the temperatur e SET POINT (either Fahrenheit or Celsius) in which the COOL Mode will operate.
9 OPERA TION Control Panel Befor e operating the unit, it is impor tant to familiarize yourself with the basic controls located on the contr ol panel. ➀ C OOL ON/OFF Activates/deactivates the COOL mode/ Button turns the unit off. ➁ F AN ON/OFF Activates/deactivates the HIGH or LOW Buttons fan mode.
10 OPERA TION (cont.) Operating in COOL Mode The unit can be operated in COOL mode by pr essing the COOL ON/OFF button (LED illuminates). NOTE: In COOL mode the unit can only be turned off by pressing the COOL ON/OFF button again, not by pressing the fan buttons.
11 OPERA TION (cont.) Operating Modes Both Classic Plus models operate in 2 modes, F AN Only and COOL . When in F AN Only mode the unit circulates the surrounding air .
12 OPERA TION (cont.) Emptying the Drain T ank During COOL mode, condensate will accumulate in the drain tank. When the drain tank becomes full, the FULL T ANK LED will flash and the unit will shut off automatically . NOTE: If you want to empty the drain tank, while the unit is in operation, press the COOL ON/OFF button to turn the unit off.
13 OPERA TION (cont.) DRAIN PUMP KIT (Optional) (Classic Plus 14 model ONL Y) A drain pump kit (CPK-3) is available to allow continuous operation and to eliminate the need for a drain tank. • When the water collects to level (A) in the pump reservoir , the drain pump begins to operate and dischar ge the water .
14 OPERA TION (cont.) DRAIN PUMP KIT (Optional) (Classic Plus 26 model ONL Y) A drain pump kit (CPK-4) is available to allow continuous operation and to eliminate the need for a drain tank. • When the water collects to level (A) in the pump reservoir , the drain pump begins to operate and dischar ge the water .
15 DAIL Y INSPECTION & MAINTENANCE Emptying the Drain T ank To empty the drain tank, refer to instructions on page 12. Cleaning the Air Filters Clean the air filters once a week. If the unit is used in a dusty environ- ment, mor e frequent cleaning may be requir ed.
16 DAIL Y INSPECTION & MAINTENANCE (cont.) In-Season/Off-Season Inspection & Maintenance ■ In-Season ➀ Check the prongs and surface of the power cor d plug for dust and/or dirt. If dust and/or dirt are pr esent, wipe off with a clean, dry cloth.
17 Self-Diagnostic Codes Self-Diagnostic Codes will be displayed on the Contr ol Board under the following conditions: Code Condition dF When the evaporator thermistor disengages the compr essor . FL When the drain tank switch shuts off the unit ( FULL T ANK LED flashes).
18 TECHNICAL SPECIFICA TIONS MODEL ITEM/FEA TURES Classic Plus 14 Classic Plus 26 Rating Conditions dry bulb 95 o F (35 o C) 95 o F (35 o C) wet bulb 83 o F (28.3 o C) 83 o F (28.3 o C) humidity (60%) (60%) Specifications power frequency 60Hz 60Hz line voltage, single phase 115 V 208/230V power consumption 1.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOL Products only to the extent stated in its of ficial written warranties.
T echnical Services Department DSCA P/N: LA990009-1217 Fourth Issue: April 2003 GAC P/N: LA484007-1431 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC.
An important point after buying a device Denso CLASSIC PLUS 14 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Denso CLASSIC PLUS 14 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Denso CLASSIC PLUS 14 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Denso CLASSIC PLUS 14 you will learn all the available features of the product, as well as information on its operation. The information that you get Denso CLASSIC PLUS 14 will certainly help you make a decision on the purchase.
If you already are a holder of Denso CLASSIC PLUS 14, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Denso CLASSIC PLUS 14.
However, one of the most important roles played by the user manual is to help in solving problems with Denso CLASSIC PLUS 14. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Denso CLASSIC PLUS 14 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
