Instruction/ maintenance manual of the product 36 Denso
Go to page of 16
First Issue: March 2005 DSCA P/N: LA484007-1810 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC. 3900 Via Or o Avenue Long Beach CA 90810-1868 800-264-9573 / 310-834-6352 www .movincool.com O P ER A T I O N M A N U A L OFFICE PRO 36 READ THIS MANUAL CAREFULL Y FOR INSTRUCTIONS ON CORRECT IN- ST ALLA TION AND USAGE, AND READ ALL SAFEGUARDS.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. (“DENSO”) warrants its MOVINCOOL Products only to the extent stated in its of ficial written warranties.
T ABLE OF CONTENTS FOREWORD ............................................................................................ 1 Defi nition of T erms ........................................................................... 1 GENERAL WARNINGS & CAUTIONS .
1 FOREWORD Congratulations on purchasing the MovinCool portable air conditioner . This manual explains how to assemble, install and operate the MovinCool Offi ce Pro 36 portable air conditioning unit. Please read this operation manual thor oughly to familiarize yourself with the features of the unit and to ensur e years of reliable operation.
2 INST ALLA TION Choosing an Installation Site CAUTION: Following are some pr ecautions to consider before choosing your in- stallation site. Please review car efully as improper installation may result in personal injury or damage to the unit. • Do n ot us e th e un i t i n a r ea s w h er e le ak ag e o f fl a mm ab le ga s ma y o cc u r .
3 UNLOCKED LOCKED FRONT AND BACK HANDLES Moving the Unit Unlock the casters and push the MovinCool unit, using the side handles, to a fl at, level Plugging in the Unit • Check the prongs and surface of the power cor d plug for dust/dirt. If dust and/or dirt are pr esent, wipe off with a clean, dry cloth.
4 FEA TURES OP36 Features • An electronic contr ol panel which allows the user to control the unit’ s operation easily . • Du al fa n sp ee ds (e it he r H ig h or Lo w) i n bot h CO OL an d Fa n Onl y mo de s. • A digital display that indicates the T emperature SET POINT (either Fahrenheit or Celsius) in which the COOL Mode will operate.
5 7. T emperature Scale LED - Illu minates to indicate the current temperatur es being displayed are either in °C or °F; also used to display the clock when programming. 8. AM/PM LED - Illuminates to indicate AM or PM time of day . 9. Program RUN Button - Activates/deactivates a program.
6 How to Set a Program ➀ Setting a ST ART TIME Press the Pr ogram SET button. The Program SET button and ST ART T IME LEDs will illuminate. Press the HRS and MIN buttons to set the S T ART T IME . ➁ Setting an END TIME Press the Pr ogram S ET button until the E ND TIME LED illuminates.
7 Operating Modes Offi ce Pro 36 operates in 2 modes, F AN Only and COOL. When in F AN Only mode, the unit circulates the surr ounding air . When in COOL mode, the compressor is operational and cool air is circulated. • COOL Mode Offi ce Pro 36 will operate in F AN Only mode for approximately 120 seconds befor e the compressor engages.
8 Drain Pump (Optional) A drain pump allows continuous operation and eliminates the need for drain tanks. • When the water collects to level (A) in the pump reservoir , the drain pump begins to operate and discharges the water . • When the water level drops below level (B), the drain pump will stop.
9 Cleaning Method ➀ Remove dust from the element with a vacuum cleaner , or rinse in cold or lukewarm water . If the element is extremely dirty , wash with a neutral detergent. ➁ After the element has been cleaned, rinse with clean running water , allow to dry , then reinstall.
10 Check the following points before calling a qualifi ed technician. SYMPTOM POSSIBLE CAUSE REMEDY Unit does not operate ➀ Ground fault breaker tripped Reset breaker ➁ Drain tank is full Empty t.
11 TECHNICAL SPECIFICA TIONS ITEM/FEA TURES OFFICE PRO 36 Rating Conditions dry bulb 95º F (35º C) wet bulb 83º F (28.2º C) humidity 60% Specifi cations power frequency 60Hz line voltage single phase 208/230V power consumption 4.4 Kw current consumption 19.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. (“DENSO”) warrants its MOVINCOOL Products only to the extent stated in its official written warranties.
First Issue: March 2005 DSCA P/N: LA484007-1810 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC. 3900 Via Or o Avenue Long Beach CA 90810-1868 800-264-9573 / 310-834-6352 www .movincool.com O P ER AT IO N M A N U A L OFFICE PRO 36 READ THIS MANUAL CAREFULL Y FOR INSTRUCTIONS ON CORRECT IN- ST ALLA TION AND USAGE, AND READ ALL SAFEGUARDS.
An important point after buying a device Denso 36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Denso 36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Denso 36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Denso 36 you will learn all the available features of the product, as well as information on its operation. The information that you get Denso 36 will certainly help you make a decision on the purchase.
If you already are a holder of Denso 36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Denso 36.
However, one of the most important roles played by the user manual is to help in solving problems with Denso 36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Denso 36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
