Instruction/ maintenance manual of the product AVR-5805CI Denon
Go to page of 214
AV SURROUND RECEIVER A VR-5805CI OPERA TING INSTRUCTIONS.
2 2 SAFETY PRECAUTIONS 2 NOTE ON USE / OBSERV A TIONS RELA TIVES A L ’UTILISA TION •A void high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Eviter des températures élevées T enir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère.
3 SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
4 Getting Started Thank you for choosing the DENON A VR-5805CI A V Surround Receiver . This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources.
5 2 System Setup Menu page 140, 141 page 141, 142 page 142, 143 page 143 ~ 145 page 145, 146 page 146, 147 page 147, 148 page 104 page 105 page 106 page 106, 107 page 107 page 108 page 108 ~ 110 page .
6 Getting Started Advanced Operation Remote control unit Operating DENON audio components .........................................81 Setting the preset memory function ............................................82 Operating a component stored in the preset memory .
7 Getting Started • Check that the following parts are included in addition to the main unit: q Operating instructions ..................................................1 w Wa rranty (for North America model only) .....................1 e Service station list.
8 Getting Started Preparing the remote control unit • The included remote control unit (RC-1036) can be used to operate not only the A VR-5805CI but other remote control compatible DENON components as well.
9 Getting Started Operating range of the remote control unit • Point the remote control unit at the remote sensor on the main unit as shown on the diagram.
10 Getting Started Part names and functions • For details on the functions of these parts, refer to the pages given in parentheses ( ). Front panel !3 !2 !1 !0 o q w e r t y u i !4 !5 !6 !7 !8 !9 @0.
11 q Power ON/ST ANDBY button ................................(22) w Power indicator ........................................................(22) e Power switch ....................................................(22, 101) r Headphones jack (PHONES) .
12 Getting Started u y o !0 !1 !3!2 !4 !6 !7 !8 !5 i e r t q w q Input signal indicator The respective indicator will light corresponding to the input signal. w Input signal channel indicator The channels included in the input source will light. This lights when the digital signal is input.
13 Getting Started • For details on the functions of these parts, refer to the pages given in parentheses ( ). NOTE: • For instructions on setting the remote control unit back light’ s lighting time ( page 85).
Easy Setup and Operation 14 Placing the speakers. Connecting the speakers. Connect the DVD player to the A VR-5805CI. Connect the A VR-5805CI’ s monitor output terminal to the TV’ s video input terminal ( page 19). Connecting a microphone ( page 21).
15 Easy Setup and Operation 2 Basic system layout (For a THX Ultra2 system) • The following is an example of the basic layout for a system consisting of eight speaker systems and a television monito.
16 Easy Setup and Operation Speaker connections • Connect the speaker terminals with the speakers making sure that like polarities are matched ( < with < , > with > ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired.
17 Easy Setup and Operation 2 Connections • By default, the speaker system setting is set to 9.1 channels. • The A VR-5805CI can be configured for 10 speaker playback using two pairs of surround speakers (A+B) and one pair of surround back speakers as shown below .
18 Easy Setup and Operation Connecting a DVD player and TV (Monitor) DVD player S VIDEO OUT COAXIAL OUT R L AUDIO OUT VIDEO OUT COMPONENT VIDEO OUT Y P B P R HDMI OUT DVI-D OUT R L R L H J I A C M L •T o connect the video output from the DVD player to the A VR-5805CI, you only need to choose one connection type.
19 Easy Setup and Operation TV (Monitor) S VIDEO IN VIDEO IN COMPONENT VIDEO IN Y P B P R HDMI IN DVI-D IN COMPONENT VIDEO OUT Y P B P R H J I M L K or • For best picture quality (especially with progressive DVD and other high definition sources) choose the component video or HDMI connection to your monitor or TV .
20 Easy Setup and Operation The Auto Setup and Room EQ function of this unit performs an analysis of the speaker system and measures the acoustic characteristics of your room to permit an appropriate automatic setting.
21 Easy Setup and Operation Connecting a microphone 1 Connect the optional microphone for Auto Setup to the SETUP MIC jack on the front panel of the unit. 2 Mount the auto setup microphone onto a camera tripod, etc., and place it at ear height at the main listening position in the listening r oom with the sound r eceptor facing the ceiling.
22 Easy Setup and Operation Starting Auto Setup 2 Press the CURSOR D D or H H button to select “Auto Setup / Room EQ”, then press the ENTER button. • The “Auto Setup / Room EQ” menu appears. 1 Press the SYSTEM SETUP button. • The “System Setup Menu” appears.
23 Easy Setup and Operation 4 If the check ends, press the ENTER button again. [ Second screen ] 3 Check the results of the speaker detection, then press the ENTER button. • Switch to the second screen. The screen shown at the below appears once the preliminary measurements are completed.
24 Easy Setup and Operation 4 Perform step 2, 3 repeatedly . The more measurement points, the better the resulting room correction effect. We recommend a minimum of 6 measurement points – 8 measurement points provides the best room correction effect.
25 Easy Setup and Operation Check of the measurement result • The results of the measured items can be checked. 1 Press the CURSOR D D or H H button to select items, then press the ENTER button. • Switch to the verification screen. Example: Speaker Config.
Measures Cause Screen example 26 Easy Setup and Operation About the error message • These error messages will be displayed when performing the measurements of Auto Setup and the automatic measurements can not be completed because of the speaker arrangement, measurement environment, or other factors.
Connecting Other Sources 27 Cable indications Signal direction Audio and Video cable • The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied). V ideo cable Audio cable NOTE: • Do not plug in the power supply cord until all connections have been completed.
28 Connecting Other Sources • The A VR-5805CI is equipped with a function for up and down converting video signals. Because of this, the A VR-5805CI’ s MONITOR OUT terminal can be connected to the.
29 Connecting Other Sources Connecting equipment with HDMI terminals [T o convert analog video signals to HDMI signals] DVD player S VIDEO OUT COAXIAL OUT R L AUDIO OUT VIDEO OUT COMPONENT VIDEO OUT Y.
30 Connecting Other Sources Connecting a DBS tuner Connecting a TV tuner H I A TV tuner S VIDEO OUT R L AUDIO OUT VIDEO OUT COMPONENT VIDEO OUT Y P B P R COAXIAL OUT R L R L J C DBS / BS Tuner S VIDEO.
31 Connecting Other Sources Connecting the external inputs (EXT . IN) terminals External decoder 1 DVD-Audio-Video / Super Audio CD Player R SURROUND B L R SURROUND BACK L R SURROUND A L R FRONT L 9.1ch AUDIO OUT CENTER SUB- WOOFER L R L R R L R L B A B A R L R L A R L R L A •A VR-5805CI is equipped with two analog external input terminals for 9.
32 Connecting Other Sources Connecting a DVD recorder DVD recorder S VIDEO OUT S VIDEO IN R L AUDIO IN R L AUDIO OUT VIDEO OUT VIDEO IN OPTICAL IN OPTICAL OUT R L R L H H I I A R L R L A D D COMPONENT VIDEO OUT Y P B P R J • For best picture quality choose the component video connection to your DVD recorder .
33 Connecting Other Sources Connecting a CD player R L AUDIO OUT CD player COAXIAL OUT R L R L A C Connecting a VCR Video deck S VIDEO IN R L AUDIO IN R L AUDIO OUT VIDEO IN S VIDEO OUT VIDEO OUT COMP.
34 Connecting Other Sources Connecting a CD recorder or MD recorder R L AUDIO IN R L AUDIO OUT CD recorder / MD recorder OPTICAL OUT OPTICAL IN R L R L A R L R L A D D Connecting a turntable AUDIO OUT GND Turntable (MM cartridge) R L A •Y ou can connect the turntable (MM cartridge) to the PHONO terminals.
35 Connecting Other Sources Connecting a tape deck R L AUDIO IN R L AUDIO OUT Tape deck R L R L A R L R L A DENON LINK connection DVD player DENON LINK E • High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold DENON LINK compatible DVD player .
36 Connecting Other Sources Connecting equipment with HDMI terminals DVD player HDMI OUT TV (Monitor) HDMI IN DVI-D IN or M M L •A simple 1-cable connection (using a commercially available cable) wi.
37 Connecting Other Sources Connecting equipment with DVI-D terminals DVD player TV (Monitor) HDMI IN DVI-D OUT DVI-D IN COAXIAL OUT L M L C R L AUDIO OUT R L R L A or • Connection with equipment that has a DVI-D (Digital Visual Interface)-D terminal permits the transfer of digital images.
38 Connecting Other Sources Connecting IEEE1394 devices DVD player IEEE1394 F • For the digital transfer of signals from Super Audio CDs and DVD-Audio discs, connect using an IEEE1394 cable. For instruction s on playing Super Audio CDs ( page 99). • Assign the IEEE1394 input the input source.
39 Connecting Other Sources Connecting the antenna terminals Direction of broadcasting station 75 Ω /ohms COAXIAL CABLE FM ANTENNA FM INDOOR ANTENNA (Supplied) AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND 1 4 2 3 2 AM loop antenna assembly Connect to the AM antenna terminals.
40 Connecting Other Sources Connecting the CONTROL terminal This terminal is used for an external controller . Perform the following operation before using an external controller connected to the RS- 232C terminal: 1. Press the ON/ST ANDBY button on the main unit and set the unit to the operating mode.
41 Connecting Other Sources Connecting the TRIGGER OUT terminals Tu rn the DC 12 V voltage on and off for the individual functions and surround modes. For details, see “Setting the T rigger Out” ( page 135).
42 Connecting Other Sources Connecting the power supply cord AC 120 V , 60 Hz AC outlet (wall) Power supply cord (Supplied) NOTE: • Only use the AC OUTLETS for audio equipment. Never use them for hair driers, TVs or other electrical appliances. • Insert the plugs securely .
Basic Operation 43 Operating the remote control unit • The RC-1036 remote control has a backlit EL display whose contents change according to the mode or function selected, with the appropriate remote commands for that mode or function.
44 Basic Operation Playing the input source 1 Select the input source to be played. • The input source indicator lights. Example: CD (Main unit) (Remote control unit) To select the input source when ZONE2 SELECT , ZONE3/4/REC SELECT or TUNING PRESET is selected, press the SOURCE button on the main unit then operate the FUNCTION konb.
45 Basic Operation Connect the headphone to the PHONES jack. • The pre-out output (including the speaker output) is automatically turned off when headphones are connected. NOTE: •T o prevent hearing loss, be careful not to raise the volume level excessively when using headphones.
46 Basic Operation Press the ON SCREEN button. Each time an operation is performed, a description of that operation appears on the display connected to A VR- 5805CI’ s VIDEO MONITOR OUT terminal. Also, the unit’ s operating status can be checked during playback.
47 Basic Operation Press the ANALOG button on the main unit or INPUT MODE button on the remote contr ol unit to switch to the analog input. 2 Selecting the analog mode ANALOG (exclusive analog audio signal playback mode) : The signals input to the analog input terminals are decoded and played.
48 Basic Operation Flat: This the frequency response of all speakers flat. This is suitable for multi-channel music reproduction, from discrete music sources such as Dolby Digital 5.1, DTS, DVD-Audio and Super Audio CD. Room EQ function Press the ROOM EQ button.
49 Basic Operation Surround Playing modes for different sources • The A VR-5805CI is equipped with many surround modes. We recommend using the surround modes as described below in order to achieve the maximum effect for the specific signal source. is a 6.
50 Basic Operation HOME THX CINEMA ENTER SURROUND PARAMETER SURROUND BACK DIRECT/STEREO CURSOR STATUS PURE DIRECT ON SCREEN CURSOR DIRECT/STEREO PURE DIRECT HOME THX CINEMA SURROUND PARAMETER ENTER Press the DIRECT/STEREO button to select the STEREO mode.
51 Basic Operation 1 Press the HOME THX CINEMA button to select “Home THX Cinema” mode. 2 Play a program sour ce with the mark. For operating instructions, refer to the manuals of the respective components. 3 Press the SURROUND P ARAMETER button. • The surround parameter menu appears.
52 Basic Operation • In addition, screen information is displayed in the following order when the ON SCREEN button is pressed repeatedly: OSD-1 Audio input signal OSD-2 Monitor information OSD-3 Inp.
53 Basic Operation 2 Surround parameters w MODE/SB CH OUT : Select the surround back channel playback method or mode. (1) (Multi channel source) THX Surround EX: Dolby Digital signals are played in the “THX Surround EX” mode. Ultra2 Cinema: The signals are played in the THX Ultra2 Cinema mode.
Press the SURROUND BACK button. Lights when the Surround Back channel is on. 54 Basic Operation Dolby Digital mode and DTS Surround (only with digital input) 1 Press the ST ANDARD button to select “ST ANDARD (Dolby/DTS Surround)” mode. 2 Play a program sour ce with the , mark.
55 Basic Operation 2 Dialogue Normalization Dialogue Normalization (Dial Norm) is a feature of Dolby Digital, which is used to keep the programs at the same average listening level so the user does not have to change the volume control between Dolby Digital programs.
56 Basic Operation Dolby Pro Logic II x (Pro Logic II ) mode •T o play in the PL II x mode, set “Sp.Back” at the Speaker Configuration setting to “1spkr” or “2spkrs”. •T o play in the PL II x mode, set “Surround Back” at the Power Amp Assign setting.
57 Basic Operation 2 Surround parameters r Pro Logic II x and Pro Logic II Mode: Select one of the modes (“Cinema”, “Music”, “Pro Logic” or “Game”). The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround.
58 Basic Operation 7 Press the ENTER or SURROUND P ARAMETER button to complete the setting. 6 Press the CURSOR F F or G G button to adjust the parameters setting.
59 Basic Operation 2 Parameters MODE: • DH1: Reference room (small room with weak reverberations). • DH2: Live room (room with a bit stronger reverberations than DH1). • DH3: Large room (larger room than DH1, offers a sense of distance and sound diffusion effects).
60 Basic Operation WIDE SCREEN DENON original surround modes • The A VR-5805CI is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field.
SURROUND BACK SPEAKER SURROUND SPEAKER SETTING DISPLA Y 61 Basic Operation SURROUND PARAMETER DSP SIMULATION ENTER CURSOR 9CH STEREO DSP SIMULATION 9CH STEREO CURSOR SURROUND PARAMETER ENTER DSP surround simulation 1 Select the surround mode for each input channel.
62 Basic Operation SURROUND PARAMETER SURROUND BACK TONE DEFEAT TONE CONTROL CURSOR ENTER CURSOR SURROUND PARAMETER ENTER ROOM SIZE: This sets the size of the sound field. There are five settings: “small”, “med.s” (medium-small), “medium”, “med.
63 Basic Operation 4 Press the CURSOR G G button to select “T one Defeat OFF”. 5 Press the CURSOR D D or H H button to select “Bass” or “T reble”. 6 Press the CURSOR F F or G G button to set the level. To increase the bass or treble: The bass or treble sound can be increased to up to +6 dB in steps of 1 dB.
64 Basic Operation FUNCTION MODE TUNING BAND BAND TUNING MODE CURSOR CH SEL/ENTER •Y ou can adjust the channel level either according to the playback sources or to suit your tastes, as described below . 1 Press the CH SEL/ENTER button. • The “Channel V ol.
65 Basic Operation Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together . Use it for example to adjust the balance of the sound from each position when multi-channel music sources are played.
66 Basic Operation Manual tuning 1 Set the input source to “TUNER”. 2 Press the TU (TUNER) button to select the TUNER mode. 3 W atching the display , pr ess the BAND button to select the desired band (AM, FM or XM). When listening to the XM satellite Radio ( page 71).
67 Basic Operation Checking the preset stations • The preset (broadcast) stations can be checked on the on screen display . Press the ON SCREEN button (in the AMP mode) r epeatedly until the “T uner Preset Stations” screen appears on the on screen display .
68 Basic Operation RDS search 1 Set the input source to “TUNER”. 3 Press the RDS SEARCH button until “RDS SEARCH” appears on the display . • Use this function to automatically tune to FM stations that provide RDS service.
69 Basic Operation 5 Press the CHANNEL button. • Automatically begin the PTY search operation. If there is no station broadcasting the designated program type with above operation, all the reception bands are searched. The station name is displayed on the display after searching stops.
70 Basic Operation 4 Press the CHANNEL button. • Automatically begin the TP search operation. If no TP station is found with above operation, all the reception bands are searched. The station name is displayed on the display after searching stops. 5 To continue sear ching, repeat step 3.
71 Basic Operation XM Satellite Radio 2 ABOUT XM SA TELLITE RADIO XM Satellite Radio offers an extraordinary variety of commercial-free music, plus the best in sports, news, talk and entertainment. XM is broadcast in superior digital audio from coast to coast.
72 Basic Operation Channel selection 1 Set the input source to “TUNER”. 2 Press the TU (TUNER) button to select the TUNER mode. 3 W atching the display , pr ess the BAND button to select the XM mode.
73 Basic Operation Direct access of channels 1 Press the SEARCH button in the XM mode. 2 Press the NUMBER buttons to enter the desired channel. For example, if you want to access channel 123 (ex.
74 Basic Operation Using the Network Audio Function Internet radio function • The A VR-5805CI can be connected to a network by cable to listen to Internet radio or music files stored on computers. Internet radio refers to radio programs broadcast over the Internet.
75 Basic Operation 2 Personal Computer Install “Windows Media Connect” on your computer . The required system for forming a music server is as described below . 1) OS (Operating System): Windows® XP Service pack2 2) Processor: Intel Pentium II or AMD processor , etc.
76 Basic Operation 2 Network settings When using a broadband router (DHCP function), the network settings are made automatically , so there is no need to make the settings from the setup menu. If the broadband router’ s DHCP function is turned off, make the “Network Setup” ( page 138, 139).
77 Basic Operation If no button is operated for approximately ten seconds, the regular display reappears. Registered presettings can be checked on the on screen display . The presettings can only be displayed with the on screen display when the “NetAudio” function is selected.
78 Basic Operation 2 Listening to Internet radio stations registered in your favorites 1 When the “NetAudio” function is selected, press the CURSOR D D or H H button to select “Favorites”, then press the ENTER or CURSOR G G button. • The Internet radio stations registered in your favorites are displayed.
79 Basic Operation Select “Radio List V ersion” to display the current version. Updating the list of radio stations 1 Press the MODE button to select the configuration mode, then press the ENTER or CURSOR G G button. • The settings screen appears.
80 Basic Operation • The same operations as for Internet radio stations can be used to preset music files or register them in your favorites and play them.
Advanced Operation 81 Remote control unit •W ith the attached remote control unit, the display changes according to the mode being operated. HOME MODE SELECTOR AMP 2 Operate the DENON audio component (CD, T APE, TUNER). For details, refer to the component’ s operating instructions.
82 Advanced Operation 1 Press the MODE SELECTOR button for the device to be set in the preset memory . Presetting is not possible for the AMP , ZONE2, ZONE3, ZONE4, TUNER and SYSTEM CALL modes. 2 Press and hold the RC SETUP button for at least 3 seconds.
q , e 83 Advanced Operation T ape deck TV / VCR 0 ~ 9, +10 SFT DISP MENU SRCH CH +– D D H H F F G G ENTER SETUP MEMO MODE BAND •ª 3 2 SOURCE ON SOURCE OFF A ~ G 67 89 1 Special remarks Default se.
Advanced Operation 84 • If your A V device is a brand other than DENON or if operation is not possible using the preset memory function, the signals of a remote control unit of that device can be stored in the A VR-5805CI’ s remote control unit.
85 Advanced Operation 1 Press and hold the RC SETUP button for at least 3 seconds. • The IR segment blinks twice. 2 Press the 9 , 7 , 8 button (9 → → 7 → → 8) in that order . • The IR segment blinks twice and the system call registration mode is set.
86 Advanced Operation 2 Resetting for individual buttons 1 2 Press and hold the RC SETUP button for at least 3 seconds. • The IR segment blinks twice. Press the 9 , 7 , 6 button (9 → → 7 → → 6) in that order . • The IR segment blinks twice and the learning function resetting mode is set.
87 Advanced Operation Multi zone music entertainment system •W hen the outputs of the “ZONE2 (ZONE3, ZONE4)” OUT terminals are wired and connected to power amplifiers installed in other rooms, different sources can be played in rooms other than the MAIN ZONE in which this unit and the playback devices are installed.
88 Advanced Operation TV (Monitor) S VIDEO IN VIDEO IN COMPONENT VIDEO IN Y P B P R Power amplifier R SURROUND L R FRONT L 5.1ch AUDIO IN CENTER SUB- WOOFER H I J B B R L R L A R L R L A 2 ZONE2 5.1 channel system • 5.1 channel playback is possible in ZONE2 if “5.
89 Advanced Operation TV (Monitor) S VIDEO IN VIDEO IN COMPONENT VIDEO IN Y P B P R Power amplifier R SURROUND L R FRONT L 7.1ch AUDIO IN CENTER SUB- WOOFER R SURROUND BACK L H I J R L R L B A B R L R L A R L R L A MUL TI SOURCE AUDIO signal cable ZONE2 VIDEO signal cable AVR-5805CI DVD player Input Monitor MAIN ZONE 7.
90 Advanced Operation AVR-5805CI DVD player Input Monitor MAIN ZONE 9.1-channel system ZONE2 AUDIO OUT (VARIABLE OUT) ZONE2 VIDEO OUT SYSTEM REMOTE CONTROL UNIT RC-1036 Power amplifier Monitor ZONE2 S.
91 Advanced Operation ZONE3 playback • The A VR-5805CI is equipped with pre-out terminals for which the volume is adjustable and video output terminals (composite and S-Video) as the ZONE3 output terminals.
92 Advanced Operation ZONE4 playback • The A VR-5805CI is equipped with pre-out terminals for which the volume is adjustable as the ZONE4 output terminals.
93 Advanced Operation ZONE2 SELECT ZONE3/4/REC SELECT FUNCTION 1 Press the ZONE2 SELECT button to display the “ZONE2 SOURCE” on the display . 2 T urn the FUNCTION knob to select the source you want to output appears on the display . 3 Start playing the source to be output.
Advanced Operation 94 4 Select the input mode. (only ZONE2 mode): Press the INPUT MODE button to switch to the input. Remote control unit operations during multi-source playback 1 Select the zone which you want to operate pressing the AMP buttons. 2 Press the ON button to turn on the Zone power .
95 Advanced Operation 1 Select the ZONE2 mode using the AMP button. Adjustment steps that need to be performed prior to surround sound playback in ZONE2 2 T est T one • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers.
96 Advanced Operation 1 Select the ZONE2 mode using the AMP button. 2 Press the CH SEL/ENTER button. • The “Channel V ol.” screen appears. 3 Press the CURSOR D D , H H or CH SEL/ENTER button then select “Fader”. The channel switches in the order shown below each time the CH SEL/ENTER button is pressed.
97 Advanced Operation 2 Select the ZONE2 mode using the AMP button. 3 Press and hold the USER MODE button until the “USER 1 (2 or 3) MEMOR Y” is appears on the ZONE2 monitor .
98 Advanced Operation 1 Select the ZONE2 mode using the AMP button. 2 Press the SURROUND P ARAMETER button. • The surround parameter menu appears. ZONE2 tone control setting • This function allows you to adjust the bass and treble of the ZONE2 audio output during surround playback in ZONE2 to suit your tastes.
Advanced Operation 99 Other function Playing Super Audio CDs with an IEEE1394 cable 1 Select the input source to which IEEE1394 was assigned at the “IEEE1394 Assign” ( page 107) in the system setup. Example: CD (Main unit) (Remote control unit) • The IEEE1394 indicator lights.
100 Advanced Operation 1 Press the ZONE3/4/REC SELECT button until “ZONE3 SOURCE” appears on the display . 2 W ith “ZONE3 SOURCE” displayed, turn the FUNCTION knob until “RECOUT SOURCE” appears on the display . • The REC indicator lights.
101 Advanced Operation Initialization of the Microprocessor • In very rare instances, the A VR-5805CI internal microprocessor might lock up, or otherwise cause mis-operation. T his might be caused due to an AC line surge or line spike noise, or by static electric discharge on or nearby the unit, or to connected components.
102 Navigating through the System Setup Menu Audio In Setup *System Setup •Y ou can change setting using the buttons on the front panel or remote control unit. [ On screen display ] [ Display ] 3 4 5 7 Digital In *Audio In Setup CD : COAX1 *Digital In Exit *System Setup 2 Press the SYSTEM SETUP button.
103 Advanced Setup – Part 1 • The A VR-5805CI is equipped with an intuitive and easy-to-understand on screen display , and is equipped with an alpha-numeric front panel display tube that can also be used to check and adjust settings. We recommend that you use the on screen display when you make system adjustments.
104 Advanced Setup – Part 1 Setting the Digital In Assignment • This assigns the digital input terminals for the different input sources. 1 Press the CURSOR D D or H H button to select “Audio Input Setup” at the “System Setup Menu”, then press the ENTER button.
EXT . IN-2 (6 CH) EXT . IN-1 (10 CH) 105 Advanced Setup – Part 1 Setting the EXT . IN Setup • Set the EXT . IN terminals playback method. 1 Press the CURSOR D D or H H button to select “EXT . IN Setup” at the “Audio Input Setup” menu, then press the ENTER button.
106 Advanced Setup – Part 1 Setting the Input Function Level • The playback level is corrected individually for the different input sources. 1 Press the CURSOR D D or H H button to select “Input Function Lev .” at the “Audio Input Setup” menu, then press the ENTER button.
Advanced Setup – Part 1 107 To reset the input function name to the default value, press the CURSOR F F or G G button to highlight the input function display , then press the CURSOR H H button . When “Default Y es” is selected, then press the CURSOR F F button to reset to the default input function name.
108 Advanced Setup – Part 1 Setting the IEEE1394 Auto Function • Set whether or not to automatically play the IEEE1394 device when it is selected with the FUNCTION knob. 1 Press the CURSOR D D or H H button to select “IEEE1394 Auto Func.” at the “Audio Input Setup” menu, then press the ENTER button.
109 Advanced Setup – Part 1 2 Preset Skip •P reset channels that are not used often can be skipped. 1 Press the CURSOR D D or H H button to select “Preset Skip” at the “T uner Pr esets” screen, then press the ENTER button. • Switch to the “Preset Skip ”screen.
11 0 Advanced Setup – Part 1 4 Repeat step 3 to input the preset channel name. To reset the preset channel name to the default value, press the CURSOR F F or G G button to highlight the preset channel display , then press the CURSOR H H button . When “Default Y es” is selected, then press the CURSOR F F button to reset to the default name.
111 Advanced Setup – Part 1 V ideo Setup •M ake the video-related settings. Setting the HDMI/DVI In Assignment • The HDMI or DVI-D input terminals are assigned for the different input sources. Select HDMI or DVI-D for the monitor output terminal.
11 2 Advanced Setup – Part 1 Setting the Component In Assignment • This assigns the component (color difference) video input terminals for the different input sources. 1 Press the CURSOR D D or H H button to select “Component In Assign” at the “Video Setup” menu, then press the ENTER button.
11 3 Advanced Setup – Part 1 2 Press the CURSOR D D or H H button to select the setting, then press the CURSOR F F or G G button to select the parameter . Analog to HDMI Convert: • ON: Setting for converting analog video signals into HDMI signals.
11 4 Advanced Setup – Part 1 • “Color Space” and “RGB Mode Setup” are only displayed when “Analog to HDMI Convert” is set to “ON”. • When connecting to an HDCP compatible monitor equipped with DVI-D terminal using an HDMI/DVI-D converter cable, the signals are output in RGB format, regardless of the “Color Space” setting.
11 5 Advanced Setup – Part 1 Display Mode: • Mode 1: Flickering is not prevented. • Mode 2: Prevents flickering of the on screen display when there is no video signal. Use this mode if the on screen display does not appear in the Mode 1, as may happen according to the TV being used.
11 6 Advanced Setup – Part 1 Setting the 2ch Direct/Stereo • The speaker settings can be changed specifically for playing in the 2 channel DIRECT or STEREO mode. 1 Press the CURSOR D D or H H button to select “Advanced Playback” at the “System Setup Menu”, then press the ENTER button.
11 7 Advanced Setup – Part 1 Setting the Dolby Digital Setup •T urn the audio compression on or off when down-mixing Dolby Digital signals. 1 Press the CURSOR D D or H H button to select “Dolby Digital Setup” at the “Advanced Playback” menu, then press the ENTER button.
11 8 Advanced Setup – Part 1 Setting the Manual EQ Setup 1 Press the CURSOR D D or H H button to select “Manual EQ Setup” at the “Advanced Playback” menu, then press the ENTER button. • The “Manual EQ” screen appears. 2 Press the CURSOR F F or G G button to select the adjustment mode, then press the ENTER button.
11 9 Advanced Setup – Part 1 Press the CURSOR D D or H H button to select “Exit”, then press the ENTER button. • The “System Setup Menu” reappears. 7 • “Base Curve Copy” is displayed after performing the Auto Setup. •T o restore the settings to their defaults, select “Default Y es 0 ”, then press the CURSOR F F button.
120 Advanced Setup – Part 1 Setting the type of speakers for ZONE2 1 Press the CURSOR D D or H H button to select “Zone Setup” at the “System Setup Menu”, then press the ENTER button.
121 Advanced Setup – Part 1 Setting the Delay T ime for ZONE2 • This parameter is for optimizing the timing of the sound produced from the various speakers and subwoofer according to the listening position in ZONE2. 1 Press the CURSOR D D or H H button to select “Delay T ime” at the “Zone Setup” menu, then press the ENTER button.
122 Advanced Setup – Part 1 Setting the Channel Level for ZONE2 • Use this setting to adjust so that the playback level between the different channels of ZONE2 is equal. •F rom the ZONE2 listening position, listen to the test tones produced from the speakers used in ZONE2 to adjust the level.
123 Advanced Setup – Part 1 • When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’ s own volume control. • When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect all surround modes for ZONE2.
124 Advanced Setup – Part 1 1 Press the CURSOR D D or H H button to select “Audio Delay” at the “V ideo Setup” menu, then press the ENTER button. • The “Audio Delay” screen appears. 2 Press the CURSOR F F or G G button to set the delay time (0 ms ~ 200 ms).
125 Advanced Setup – Part 1 Press the CURSOR D D or H H button to select “Exit”, then press the ENTER button. • The “Zone Setup” menu reappears. 5 • “ZONE2 T one/Ch Lev .” can be set in the same way as “ZONE3/ZONE4 T one/Ch Lev .”.
126 Advanced Setup – Part 1 Option Setup •M ake other expert settings. Setting the Channel Setup •W ith this setting it is possible to change the number of channels played in the different zones according to the purpose. The A VR-5805CI is equipped with pre-out terminals for a total of 22 channels.
127 Advanced Setup – Part 1 2 The subwoofer output composition is as shown below . Subwoofer Output Composition 1 SP – Select this when only one subwoofer is connected. L/R Select this when subwoofers are installed on the left and right. F/B Select this when subwoofers are installed at the front and rear .
128 Advanced Setup – Part 1 2 Connecting the preouts The pre-out terminals used to connect the subwoofer depends on the MAIN ZONE’ s channel setup. Connect as shown on the diagram below . 9.1 CH / 7.1 CH / 5.1 CH 1 SP Channel Setup Main Subwoofer Connection Subwoofer 5.
129 Advanced Setup – Part 1 Setting the Power Amplifier Assignment •W ith the A VR-5805CI’ s 10-channel power amplifier , it is possible to select 10 channels worth of signals (not including the subwoofer signals output from the pre-out terminals) to be output from the speakers.
130 Advanced Setup – Part 1 4 Press the ENTER button to enter the setting. • The “Option Setup” menu reappears. 1 Press the CURSOR D D or H H button to select “Power Amp Assign” at the “Option Setup” menu, then press the ENTER button. • The “Power Amp Assign” screen appears.
131 Advanced Setup – Part 1 Bi-Amp connections Certain loudspeakers are equipped with two sets of input terminals, for bi-amplification. The A VR-5805CI Amp Assign mode allows you to power bi-amp-capable speakers with two amplifier channels, up to a total of 5 bi- amplified speakers in a system using all 10 of the A VR- 5805CI amplifier channels.
132 Advanced Setup – Part 1 • Amp Assign mode: +ZONE2/3 Channel Setup / Power Amp Assign MAIN ZONE ZONE2 L1 FL R1 FR L2 C R2 Z3 M L3 SL A R3 SR A L4 Z2 L R4 Z2 R L5 SBL R5 SBR 7.
133 Advanced Setup – Part 1 2 T able of channels to which power amplifiers can be assigned with respect to the channel settings for the different zones and the amplifier assignment modes • Amp Ass.
134 Advanced Setup – Part 1 V olume Limit: Set the upper limit for the volume for the different zones. • –20 dB, –10 dB, 0 dB: The volume cannot be increased above the selected levels. • OFF: If you do not want to set a volume limit, select “OFF”.
135 Advanced Setup – Part 1 Setting the T rigger Out • Four 12 V DC T rigger Outputs on the rear panel can be used to control other devices with compatible trigger inputs, such as motorized screens, motorized screen masking, motorized drapes, and other trigger -controlled devices.
136 Advanced Setup – Part 1 Setting the AC Outlet Assignment • This sets the AC outlet to on or off for the different input sources. 1 Press the CURSOR D D or H H button to select “AC Outlet Assign” at the “Option Setup” menu, then press the ENTER button.
Advanced Setup – Part 1 137 1 Press the CURSOR D D or H H button to select “Setup Lock” at the “Setup Memory / Lock” screen, then pr ess the ENTER button. • Switch to the “Setup Lock” screen. 2 Press the CURSOR F F button to select “ON”, to lock the system setup settings, then press the ENTER button.
138 Advanced Setup – Part 1 • If you are using a broadband router (DHCP function), there is no need to make the settings at “Setting the IP Address” and “Setting the Proxy”, since the DHCP function is set to “ON” in the A VR-5805CI’ s default settings.
139 Advanced Setup – Part 1 2 Setting the Proxy Make this setting when connecting to the Internet via a proxy server . 1 Press the CURSOR D D or H H button to select “Proxy” at the “Network Setup” scr een, then press the ENTER button. • The “Proxy” screen appears.
Advanced Setup – Part 2 140 Setting the type of speakers 1 Press the CURSOR D D or H H button to select “Speaker Setup” at the “System Setup Menu”, then press the ENTER button.
141 Advanced Setup – Part 2 2 Parameters Large: Select this when using speakers that can fully reproduce deep bass well below 80 Hz. Y es / No: Select “Y es” when a subwoofer is installed, “No” when a subwoofer is not installed. Small: Select this when using speakers that are not capable of handling deep bass well below 80 Hz.
142 Advanced Setup – Part 2 Setting the Delay T ime 1 Press the CURSOR D D or H H button to select “Delay T ime” at the “Speaker Setup” menu, then press the ENTER button.
143 Advanced Setup – Part 2 4 Press the CURSOR F F or G G button to set the distance between the center speaker and listening position. Example: When the distance is set to 10.0 feet for the center speaker The distance changes in units of 1 foot or 0.
144 Advanced Setup – Part 2 3 Press the CURSOR D D or H H button to select “T est T one Start”, then press the CURSOR F F button to select “Y es”. 4 -1 When “Auto” mode is selected: Press the CURSOR F F or G G button to adjust all the speakers to the same volume.
145 Advanced Setup – Part 2 • When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’ s own volume control. • When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect all surround modes.
146 Advanced Setup – Part 2 • Please set all THX Certified speakers to small and the crossover to 80 Hz. •W e recommend using with the crossover frequency set to “FIXED–THX–”, but depending on the speaker , setting it to a different frequency may improve frequency response near the crossover frequency .
147 Advanced Setup – Part 2 • For the “WIDE SCREEN” and “9CH STEREO” DSP simulation modes, the surround speakers can be set separately . • See page 105 for the selection of the surround speakers when the “ANALOG” mode is selected at “EXT .
148 Advanced Setup – Part 2 1 Press the CURSOR D D or H H button to select “Surround Back Speaker Position” at the “THX Audio Setup” screen, then pr ess the ENTER button. 2 Press the CURSOR F F or G G button to select the settings according to the distances of the two surround back speakers ( page 142 : ), then press the ENTER button.
149 Advanced Setup – Part 2 Setting the Room EQ Setup 1 Press the CURSOR D D or H H button to select “Room EQ Setup” at the “Auto Setup / Room EQ” menu, then press the ENTER button. • The “Room EQ Setup” screen appears. • Set the Room EQ setting with All or Assign for each surround mode.
150 Advanced Setup – Part 2 Setting the Direct Mode Setup 1 Press the CURSOR D D or H H button to select “Direct Mode Setup” at the “Auto Setup / Room EQ” menu, then press the ENTER button. • The “Direct Mode Setup” screen appears. • Set the ON/OFF setting of Room EQ, in the case of the surround mode is in DIRECT or PURE DIRECT .
151 Advanced Setup – Part 2 Check the parameter 1 Press the CURSOR D D or H H button to select “Parameter Check” at the “Auto Setup / Room EQ” menu, then press the ENTER button. • The “Parameter Check” screen appears. • The results of the measured items can be checked.
152 Advanced Setup – Part 2 10 Press the CURSOR D D or H H button to select “Exit”, then press the ENTER button. • The “Auto Setup / Room EQ” menu reappears. 11 Press the CURSOR D D or H H button to select “Exit”, then press the ENTER button.
153 Advanced Setup – Part 2 Page Default settings Speaker Setup Page Default settings Auto Setup / Room EQ 1. Auto Setup/Room EQ 1 Auto Setup Room EQ Setup 2 Direct Mode Setup 4 Set the ON/OFF setting of Room EQ, in the case of the surround mode is in Direct or Pure Direct.
154 Advanced Setup – Part 2 V ideo Setup Page Default settings Audio Input Setup Page Default settings 3. Audio Input Setup 104 Digital In Assignment CD DVD VDP TV DBS VCR-1 VCR-2 COAX 1 COAX 2 COAX 3 COAX 4 COAX 5 OPT 1 OPT 2 This assigns the digital input terminals for the different input sources.
Page Default settings Zone Setup 155 Advanced Setup – Part 2 6. Zone Setup 1 2 Speaker Configuration This selects the subwoofer used in ZONE2 for playing the low base sound.
156 Advanced Setup – Part 2 Option Setup Page Default settings 7. Option Setup 1 Channel Setup The number of channels that you wish to play back in each zone are assigned to each zone accordingly .
Symptom Cause Measures Page T roubleshooting 157 If a problem should arise, first check the following. 1. Are the connections correct? 2. Have you operated the receiver according to the Operating Instructions? 3.
Symptom Cause Measures Page 158 T roubleshooting The HDMI audio is not output. • The A VR-5805CI does not play HDMI audio signals. • The HDMI audio signals are not output from the connected monitor device. • Set the HDMI audio playback setting at the “HDMI/DVI In Assign” settings to “AMP”.
Additional Information 159 • Other types of audio: These signals are designed to recreate a 360° sound field using three to five speakers. In this case the speakers should surround the listener from all sides to create a uniform sound field from 360°.
160 Additional Information Surround back speakers The THX Surround EX format adds new “Surround Back” (SB) channels to the conventional 5.1 channel system. This makes it easy to achieve sound positioned directly behind the listener , something that was previously difficult with sources designed for conventional multi surround speakers.
161 Additional Information Speaker setting examples Here we describe a number of speaker settings for different purposes. Use these examples as guides to set up your system according to the type of speakers used and the main usage purpose.
162 Additional Information • Set the front speakers, center speaker and subwoofer in the same positions as in example q . • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 2 to 3 feet (60 to 90 centimeters) above the ears.
163 Additional Information [2] When not using surround back speakers Subwoofer Surround speakers Front speakers 45° Monitor Center speaker [ As seen from above ] Front speaker 2 to 3 feet [ As seen from the side ] Surround speaker • Set the front speakers with their front surfaces as flush with the TV or monitor screen as possible.
164 Additional Information 2 Sources recorded in Dolby Surround Sources recorded in Dolby Surround are indicated with the following logo marks. Dolby Surround support mark: Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
165 Additional Information T imbre Matching™: The human ear changes our perception of a sound depending on the direction from which the sound is coming. In a movie theater , there is an array of surround speakers so that the surround information is all around you.
166 Additional Information HDCD ® (High Definition Compatible Digital ® ) HDCD is an encoding/decoding technology that greatly reduces the distortion that occurs upon digital recording while maintaining compatibility with the conventional CD format, thus expanding the dynamic range and achieving a high resolution.
167 Additional Information Windows Media Connect This is a media server provided free of charge by Microsoft since October 2004. It operates with all types of music jukebox programs, but is optimum with Windows Media Player V er . 10. Windows Media Connect can be used to play playlists created on jukebox software such as Windows Media Player V er .
Surround Mode 168 Additional Information Surround modes and parameters C : Signal / Adjustable E : No signal / Not adjustable B :T urned on or off by speaker configuration setting C : Able E : Unable NOTE1 : BASS +6 dB, TREBLE 0 dB NOTE2 : BASS +6 dB, TREBLE +4 dB NOTE3 : This parameter is availabe when the “MODE” is set to “CINEMA”.
Surround Mode 169 Additional Information PURE DIRECT , DIRECT DSD DIRECT DSD MUL TI DIRECT MUL TI CH DIRECT STEREO EXT . IN MUL TI CH IN WIDE SCREEN HOME THX CINEMA (2ch) HOME THX CINEMA (5.
170 Additional Information 2 Differences in surround mode names depending on the input signals E E C C C C C C E E E E E E E E E E E E E E E E E E E E E E E 4 C C E E E E E C E C C C C E E E E E E E C.
Button 171 Additional Information Surround Mode Super Audio CD Note DTS ES DSCRT (With Flag) Input signals DTS DOLBY DIGIT AL ANALOG LINEAR PCM DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY DIGIT AL EX (With Flag) DOLBY DIGIT AL EX (With no Flag) DOLBY DIGIT AL (5.
S-VIDEO 172 Additional Information Relationship between the video input signal and monitor output according to the video convert mode settings of MAIN ZONE E E : Not output ✳ 1: On screen display superimposed on video signal and output. ✳ 2: On screen display superimposed on S-Video signal and output.
173 Additional Information C C : Signal input E E : No signal E E : Not output ✳ 1: On screen display superimposed on video signal and output. ✳ 2: On screen display superimposed on S-Video signal and output. : On screen display only displayed for SYSTEM SETUP , SURROUND P ARAMETER (except the HDMI monitor out) and ON SCREEN button.
Specifications 174 2 Audio section • Power amplifier Rated output: Front: 170 W + 170 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05 % T .H.D.) 200 W + 200 W (6 Ω /ohms, 20 Hz ~ 20 kHz with 0.05 % T .H.D.) Center: 170 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.
175 Specifications 2 T uner section [FM] (note: µV at 75 Ω /ohms, 0 dBf = 1 x 10 –15 W) [AM] Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV 50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.
1 PRESET CODE List of preset codes / Liste de codes préréglés DVD 3D Lab 40539 Acoustic Solutions 40713, 40730, 41242 Advent 41016 AEG 40770, 40790 AFK 41051 Afreey 40698 Aim 40699, 40778, 40833, 4.
2 PRESET CODE Denver 40699, 40778, 41107, 41165, 41353, 41359 Desav 40770 Desay 40800, 41407 Diamond 40651, 40768, 40790 Dick Smith Electronics 40833, 41730 Digihome 40713 digiRED 40717 Digitor 40651,.
3 PRESET CODE Momitsu 41082 MTlogic 41265 Mustek 40730, 41730 Mx Onda 40651 NAD 40591, 40692, 40741 Naiko 40770, 41004 Narita 41115 NEC 40591, 40692, 40785, 40869, 41404 Nesa 40717 Nevir 40770, 40831 .
4 PRESET CODE Shinco 40717 Shinsonic 40533, 40839 Silva 40831 Silva Schneider 40831 Singer 40690, 40768 Skantic 40539, 40713, 41003 Skymaster 40730, 40768 Slim Art 40784 Slim Devices 40533 SM Electron.
5 PRESET CODE CyberHome 41129 Denon 40490 Dick Smith Electronics 41730 Digitrex 41056 DSE 41730 Funai 40675, 41334 Gateway 41073, 41158 Go Video 40741, 41158, 41304, 41730 iLo 41348 JVC 41164 LG 40741.
6 PRESET CODE American High 20035 Amoisonic 20479 Amstrad 20000, 20072, 20278 Anam 20037, 20162, 20226, 20240, 20278 Anam National 20162, 20226, 21562 Anitech 20072 Ansonic 20000 Apelsound 20209 Arist.
7 PRESET CODE Hypson 20000, 20037, 20072, 20209, 20278 iBUYPOWER 21972 Imperial 20000 Ingersoll 20209, 20240 Inno Hit 20072, 20432 inotech 20278 Interbuy 20072 Interfunk 20081, 20104 Internal 20278 In.
8 PRESET CODE Niveus Media 21972 Noblex 20240 Nokia 20041, 20042, 20046, 20048, 20081, 20104, 20240, 20278, 20315 Nordmende 20041, 20067, 20320 Northgate 21972 Novatronic 20209 Nu-T ec 20209 Oceanic 2.
9 PRESET CODE SEI 20081 Seleco 20037, 20041 Semp 20045 Sentra 20072 Serie Dorada 20037 Sharp 20037, 20048, 20209, 20807 Shinco 20000 Shintom 20072, 20104 Shivaki 20037 Shogun 20240 Siemens 20037, 2004.
10 PRESET CODE T eac 20000, 20037, 20041, 20072, 20278, 20642 Te c 20072 T ech Line 20072 T echnics 20035, 20081, 20162, 20226 T echniSat 20209 T eco 20035, 20037, 20038, 20041, 20048 T edelex 20037, .
11 PRESET CODE Akito 10037 Akura 10009, 10037, 10218, 10264, 10282, 10359, 10412, 10668, 10714, 11037 Alaron 10179, 10216 Alba 10009, 10036, 10037, 10163, 10216, 10218, 10235, 10247, 10355, 10371, 104.
12 PRESET CODE Chengdu 10009, 10817 Ching T ai 10003, 10009, 10092, 10179 Chun Y un 10000, 10003, 10009, 10092, 10179, 10180, 10700, 10843 Chunfeng 10009, 10264 Chung Hsin 10036, 10053, 10108, 10180 C.
13 PRESET CODE Dual 10037, 10217, 10259, 10394, 10531, 10544, 11137 Dual T ec 10217 Dumont 10017, 10019, 10070, 10087, 10102 Dunai 10544 Durabrand 10003, 10171, 10178, 10180, 10463, 11034, 11463 DVX 1.
14 PRESET CODE GE 10021, 10027, 10030, 10047, 10051, 10055, 10092, 10093, 10109, 10135, 10178, 10180, 10282, 10287, 10335, 10451, 10560, 10625, 11147, 11347, 11447, 11454 GEC 10037, 10072, 10163, 1021.
15 PRESET CODE Haiyan 10264, 10412, 10817 Halifax 10217 Hallmark 10178 Hammerstein 10060, 10264 Hampton 10216, 10217 Hanimex 10218 Hankook 10019, 10030, 10056, 10178, 10180, 10628 Hanseatic 10009, 100.
16 PRESET CODE Irradio 10218, 10247, 10290, 10371 IRT 10451, 10628, 10698, 11661 Isukai 10037, 10218, 10282, 10455 ITC 10217, 10320 ITS 10216, 10264, 10371 ITT 10163, 10179, 10193, 10208, 10339, 10346.
17 PRESET CODE Matsui 10009, 10011, 10035, 10036, 10037, 10072, 10163, 10177, 10191, 10195, 10208, 10217, 10235, 10335, 10355, 10363, 10371, 10433, 10443, 10455, 10487, 10516, 10544, 10556, 10579, 106.
18 PRESET CODE Noblex 10154, 10180 Nobliko 10070, 10102, 10216 Nokia 10109, 10163, 10179, 10208, 10320, 10339, 10346, 10359, 10361, 10374, 10473, 10480, 10548, 10606, 10610, 10631 Norcent 10748, 10824.
19 PRESET CODE Panama 10037, 10217, 10247, 10264 Panashiba 10001 Panasonic 10037, 10051, 10054, 10055, 10108, 10163, 10208, 10226, 10250, 10361, 10367, 10508, 10516, 10548, 10650, 10853, 11310, 11410,.
20 PRESET CODE Rex 10163, 10206, 10259, 10264, 10363, 10411 RFT 10037, 10072, 10087, 10264, 10370, 10428 Rhapsody 10185, 10216 Ricoh 10037 Rinex 10264, 10418, 10698, 10773 Roadstar 10009, 10037, 10218.
21 PRESET CODE Show 10009, 10072, 10418, 10706 Siarem 10087, 10102, 10516 Siemens 10032, 10037, 10146, 10157, 10191, 10195, 10200, 10361, 10535 Siera 10012 Siesta 10370 Signature 10016 Silva 10037, 10.
22 PRESET CODE T exet 10009, 10216, 10217, 10218, 10374 ThemeScene 10887 Thomson 10037, 10109, 10287, 10335, 10560, 10625, 11447 Thorn 10035, 10036, 10037, 10072, 10073, 10104, 10109, 10163, 10193, 10.
23 PRESET CODE Unic Line 10037, 10455 United 10037, 10606, 10714, 10715, 11037 Universal 10027, 10037 Universum 10009, 10011, 10032, 10036, 10037, 10070, 10104, 10105, 10146, 10157, 10163, 10170, 1017.
24 PRESET CODE CABLE ABC 00003, 00007, 00008, 00011, 00013, 00014, 00017, 00237 ADB 01063, 01269 Aichi Denshi 01512 Alcatel 00896 Allegro 00153, 00315 Americast 00899 Amstrad 01222 Antronix 00022 Arch.
25 PRESET CODE Paragon 00000 Philips 00013, 00153, 00317, 00619, 00817, 01305 Pioneer 00144, 00533, 00877, 01500, 01877 Popular Mechanics 00400 Pulsar 00000 PVP Stereo Visual Matrix 00003 Quasar 00000.
26 PRESET CODE Arcus 01143 Arion 01205 Armstrong 00243 Arnion 01300 ASA 00397 Asat 00200 ASCI 00114, 01334 ASLF 00713 AssCom 00853 AST 00321, 00351 Astacom 00668, 00710 Aston 00142, 01261 Astra 00243,.
27 PRESET CODE Foxtel 00455, 00497, 00720, 00879, 01162, 01173, 01176, 01356 Fracarro 00421, 00668, 00871 Freecom 00173, 00421, 00501 Freesat 00882 Fresat 00885 FTEmaximal 00331, 00369, 00713, 00794, .
28 PRESET CODE Kathrein 00114, 00115, 00123, 00173, 00200, 00249, 00331, 00358, 00442, 00480, 00553, 00613, 00658, 00713, 00742, 00818, 00898, 01057, 01221, 01561, 01567 Kathrein Eurostar 00115 Kenwoo.
29 PRESET CODE Max 00607 Maximum 01075, 01334 MB 00605 MDS 01225 Mediacom 01206 Mediamarkt 00243 MediaSat 00292, 00501, 00853 Medion 00132, 00299, 00369, 00713, 01043, 01075, 01161, 01232, 01334, 0141.
30 PRESET CODE Pro Visat 00520 Prod 00573, 00639, 00723, 00873 Profile 00710 Promax 00455 Prosat 00628, 01173 Proscan 00392, 00566 Protek 01567 Proton 01535 ProVision 00520 Pye 00571 Pyxis 00834 QNS 0.
31 PRESET CODE T ivo 01142, 01442, 01443, 01444 T okai 00200 T onna 00455, 00501, 00587, 00592, 00668, 00713, 00834 T opfield 01206, 01207, 01545 T oshiba 00082, 00455, 00486, 00749, 00790, 01285, 014.
32 PRESET CODE Xcom 00123, 00668, 00832 Xcom Multimedia 00668 XMS 01075 Xrypton 00369 Xsat 00123, 00668, 00713, 00847, 01214, 01323 Xtreme 01300 Ye s 00887 Zaunkonig 00692 Zehnder 00114, 00115, 00321,.
33 PRESET CODE Mission 30157 Mitsubishi 30156 MTC 30420 Musical Fidelity 30393, 30437 Myryad 30157 NAD 30000, 31208 Nagaoka 30018 Naim 30157 Nakamichi 30147 NEC 30043, 30234 Nikko 30164, 30170, 30174 .
34 PRESET CODE T echnics 20229, 20353 Thorens 20029 Universum 20375, 20439 V ictor 20244, 20273, 20274 Wa rds 20027, 20029 Wharfedale 20439 Y amaha 20094, 20097 PVR 1 ABS 21972 Alienware 21972 CyberPo.
35 PRESET CODE Broksonic 40695 Bush 40516, 40713, 40884 Denver 41353, 41359 Emerson 41268 Go Vision 41071 Grundig 40695 Hitachi 41247 Jensen 41016 Konka 40719, 40720 Panasonic 41490 Philips 40854, 412.
40490 DVD preset codes / Codes préréglés DVD 36 PRESET CODE Zenith 00899 DBS/PVR Combination 1 @sat 01300 Atsat 01300 British Sky Broadcasting 01175 Canal Satellite 01339 Comag 01412 Digiturk 01076.
.
.
Denon Brand Company , D&M Holdings Inc. Printed in Japan 00D 511 4483 000 TOKYO, JAP AN www .denon.com.
An important point after buying a device Denon AVR-5805CI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Denon AVR-5805CI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Denon AVR-5805CI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Denon AVR-5805CI you will learn all the available features of the product, as well as information on its operation. The information that you get Denon AVR-5805CI will certainly help you make a decision on the purchase.
If you already are a holder of Denon AVR-5805CI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Denon AVR-5805CI.
However, one of the most important roles played by the user manual is to help in solving problems with Denon AVR-5805CI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Denon AVR-5805CI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
