Instruction/ maintenance manual of the product AVR-4308CI AV Denon
Go to page of 110
A V SURROUND RECEIVER A VR-4308CI Owner ’ s Manual G raphical U ser I nterface Use this manual in combination with the oper ating guide display ed on the GUI scr een. GUI Menu Operation ( v pag e 23) GUI Menu Map ( v page 24) 1.AVR4308_P1~P27.
n SAFETY PRECA UTIONS C AU T I O N RISK O F ELECTR IC SHOCK DO NOT OPEN CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK).
• A v oid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Eviter des températures éle vées. T enir compte d’une dispersion de chaleur suf fisante lors de l’installation sur une étagère. • Handle the pow er cord carefully .
Accessor ies ······················································································ 2 Cautions.
Chec k that the f ollowing parts are supplied with the product. q Owner’ s manual ...................................................................... 1 w War ranty (for North America model only) ................................ 1 e Ser vice station list .
In addition to the A VR-4308CI, the included main remote control unit (RC-1 068) can also be used to operate the equipment listed below . q DENON system components w Non-DENON system components • By set ting the preset memor y ( v page 61 ~ 63) • By using the learn function ( v page 64) q Lif t the clasp and remo ve the rear lid.
F or but tons not e xplained here, see the page indicated in parentheses ( ). w e t o i u y q r Q3 Q2 Q1 Q0 q Po w er operation but t on (ON/ST ANDBY) ························.
W0 W1 W0 Q9 Q9 t e i Q0 Q1 Q2 Q3 Q4 Q7 o Q5 Q6 q y u r w W2 W0 W1 W0 Q9 Q8 Q9 q RS-232C connector ····································· (21) w TRIGGER OUT jacks ·.
q i w e r t y u o Q1 Q3 Q4 Q2 Q0 Q5 Q6 Q7 Q9 W0 W2 W5 W7 W6 W4 W3 W1 Q8 q Signal transmission indicator ··················· (61) w Mode select buttons ···············.
A udio cables Video cables Coaxial digital connections (Orange) Coaxial digit al (75 Ω/ohms pin-plug) cable Optical digital connections Optical cable Analog connections (ster eo) (White) (Red) R L R .
G Flow of video signals f or ZONE2 H • This function automatically con verts various formats of video signals input to the A VR-4308CI into the format used to output the video signals from the A VR-4308CI to a monitor .
Speak er Connections w q w q w q w q w q w q w q w q w q w q */ w q (L) (R) (L) (R) (L) (R) (L) (R) (R) (L) The illustration belo w sho ws a basic example of installation of the amplifi er combined with 8 speak ers and a monitor .
Connecting the Speak er Cables Carefully c hec k the lef t (L) and right (R) channels and + (red) and – (blac k) polarities on the speakers being connected to the A VR-4308CI, and be sure to interconnect the c hannels and polarities correctly . 1 Peel off about 0.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting With HDMI connections, the video and audio signals can be transferred with a single cable.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting • Connect the cables to be used ( v page 8 “Video Con v ersion F unction ”). • W ith HDMI connections, the video and audio signals can be transf erred with a single cable.
Record Pla yer • When connecting a record player with an MC cartridge, use a commercially av ailable MC head amplifi er or a step-up transf ormer . • Induction humming (a booming sound) may be produced from the speakers if the v olume is raised with no record play er connected.
47*%&0 065 "6%*0 7*%&0 $0.10/&/57*%&0 : 1 # 1 3 7*%&0 065 065 "6%*0 3 - 065 $0"9*"- 065 R L R L TV/CABLE T uner Connect the cables to be used.
Carefully chec k the left (L) and right (R) c hannels and the inputs and outputs, and be sure to interconnect correctly . Connecting the Recor ding Components Digital Video Recorder Connect the cables to be used.
3 - 3 - 065 */ 065 015*$"- */ "6%*0 "6%*0 R L R L R L R L CD Recorder / MD Recor der / T ape Deck Make analog connections if you wish to record analog audio signals, or digital connections if you wish to record digital audio signals, depending on the t ypes of connectors on the components being used.
47*%&0 065 "6%*0 7*%&0 7*%&0 065 065 015*$"- "6%*0 3 - 065 R L R L 46# 800'&3 $&/5&3 463306/% #"$, 3 - 463306/% 3 - '30/5 3 - "6%*0 R L.
XM NO TE Keep the pow er cord unplugged until the XM Mini-T uner and Home Doc k connection ha ve been completed. XM connector • The A VR-4308CI is an XM Ready ® receiver . Y ou can receive XM ® Satellite Radio by connecting to the XM Mini-T uner and Home Doc k (includes home antenna, sold separately) and subscribing to the XM ser vice.
Antenna t erminals An F -type FM antenna cable plug can be connected directly . AM/FM Direction of broadcasting station AM loop antenna (small, supplied) FM antenna 75 Ω/ohms Coaxial cable FM indoor .
Networ k A udio [Wir ed LAN] [Wir eless LAN] T o W AN side Internet Router Computer T o LAN port T o LAN port T o W AN side Internet Modem Router with access point Computer LAN port/Ethernet connector.
Multi Zone ZONE2 or ZONE3 Pr e-out Connections • If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 or ZONE3 pre-out (variable or fixed le vel) connectors can be used to pla y a diff erent program source in ZONE2 or ZONE3 the same time ( v page 70 ~ 7 4).
NO TE • Insert the A C plugs securely . Incomplete connections could cause noise. • Only use the A C outlets to plug in audio devices. Do not use them as pow er supplies for hairdr yers or anything other than audio equipment. W ait until all connections hav e been completed bef ore connecting the pow er cord.
A ut o Setup Optimize set tings for speakers in use. The appropriate set tings for the speakers you are using will be perf ormed automatically . Operate as instructed on the GUI. Some typical examples are described below . Au to Set up 1 2 3 4 5 St art RETU RN Am p A ssi gn Co nfi g 7.
GUI Menu Map P ar amet er ( v page 42 ~ 45) Infor mation ( v page 45, 46) n Stat us • MAIN ZONE • ZONE2/3/4 n A udio Input Signal n HDMI Inf or mation n A uto Surr ound Mode n Quic k Select n Pr eset Station n A udio • Surr ound P aramet ers · Mode · Cinema EQ · DRC · D.
• This procedure lets you measure the acoustic properties of your speakers and listening room and make the optimum set tings automatically . • This function provides the optimum listening environment for all listening positions in a home theater where several people view or listen to the video or audio source simultaneously .
The speaker connection st atus and the speaker polarities are detected at the main listening position. At this time, the listening en vironment with respect to the main listening position (“Speak er.
Er ror Messag es If the auto setup procedure could not be completed due to speak er installation, the measuring environment, etc., an error message is display ed. If this happens, c hec k the relev ant items, be sure to take the necessary measures, then perform the auto setup procedure o v er again.
Make detail set tings f or various parameters. Speak er Setup Use this procedure to set the speakers manually or if you wish to c hange the set tings made with the auto set up procedure .
Mode Select test tone playbac k method. f Channel Level Adjust c hannel lev els to obt ain equal volume from all speakers. [Selectable items] Auto Manual Sur r ound Select surround speaker from whic h test tone is output. [Selectable items] A B A+B Start Output test tone.
a i/p Scaler Make set tings for i/p scaler function. [Selectable items] A to H A to H & H to H OFF HDMI Setup Make set tings for HDMI video/audio output.
a EXT . IN Set up Make speak er set tings for EXT . IN mode playbac k. A udio Setup Make set tings for audio pla ybac k. F Menu tr ee F Manual Setup A udio Set up a EXT .IN Setup s 2ch Dir ect/St er eo d Downmix Option f A ut o Sur r ound Mode g Manual EQ Sur r ound Speak er Select the surround speakers to use.
g Manual EQ Adjust tonal quality f or eac h speaker using graphic equalizer . Adjust CH Select speaker adjustment method. [Selectable items] Each L/R All Manual EQ Select the speaker and frequency band and adjust the le vel. [Selectable items] 63 125 250 500 1k 2k 4k 8k 16k Curve Cop y Copy “Flat” cur ve from Room EQ.
z : This is the fl ow for infrastr uct ure type communications. F or ad-hoc communications, set “Mode ” at the “Detail” set tings to “ Ad-hoc” . Wir eless LAN set tings Make set tings for wireless LAN. The mode automatically switc hes to “Wireless” .
s Other Make setting for amp pow er sav e mode and computer language environment. P o w er Saving Make set ting for pow er saving when not connected to network.
Option Setup Make v arious other set tings. F Menu tr ee F Manual Setup Option Setup a Amp Assign s V olume Control d Source Delet e f GUI g Quick Select Name h T rigg er Out 1 j T rigg er Out 2 k Dig.
h T r igg er Out 1 Select the conditions to turn on the trigger out 1 with respect to the zone, input source, surround mode, HDMI monitor , etc. F or details about the trigger out function, see page 21 . j T r igg er Out 2 This sets the conditions to turn on the trigger out 2, in the same wa y as “T rigger Out 1” above.
NO TE • Connection to the network and specifi c set tings are required to update the fi rmware. F or details, see page 20, 32 ~ 34. • Do not turn of f the po wer until updating is completed. • Normally there is no need to use this function, aside from the cases described below .
a Play The pla ybac k screen is displayed. [Input source] [Selectable items] Start TUNER NET/USB XM HD Radio ( iPod ) s A uto Pr eset Use the auto preset function to program radio stations. [Input source] TUNER HD Radio If an FM station cannot be preset automatically , select the desired station by tuning it in manually , then preset it manually .
h Rename Change the display name f or this source. Names containing up to 8 c haracters can be input. [Charact ers that can be input] A ~ Z a ~ z 0 ~ 9 ! “ # % & ’ ( ) * + , - . / : ; < = > ? @ [ ] (space) j Other Make v arious other set tings.
Front Rear All One OFF ON OFF Assign None NET/USB iP od doc k Assign Control Doc k for iP od to this source. CD DVD HDP TV/CBL SA T VCR DVR V .AUX [Input source] [Selectable items] A0 Playbac k Mode Make set tings for “NET/USB” playbac k. [Input source] USB Select Select USB port to use.
Input signal Display Dolby Digital Source DOLB Y DIGIT AL (other than 2c h) / DOLB Y DIGIT AL EX DOLB Y DIGIT AL DOLB Y DIGIT AL EX DOLB Y DIGIT AL+PL g x CINEMA DOLB Y DIGIT AL+PL g x MUSIC DOLB Y DIGIT AL Plus DOLB Y DIGIT AL + DOLB Y T rueHD DOLB Y T rueHD DTS Surround Source DTS (5.
Playbac k in the Pure Dir ect Mode This is the mode that recreates the original sound most faithfully , providing extremely high quality sound. • When in the PURE DIRECT mode, the GUI screen is not display ed and the display on the main unit is t urned of f .
0 ~ 3 ~ 6 Dimension Shif t sound image center to front or rear , to adjust playbac k balance. [V ariable r ang e] 0 ~ 3 ~ 7 0 ms ~ 30 ms ~ 300 ms 1 ~ 10 ~ 15 Small Medium small Medium Medium large Large Delay Time Adjust dela y time to control sound stage size.
Audyssey : Optimize frequency response of all speak ers to matc h room acoustics. Audyssey Byp. L/R : Optimize frequency response of speakers ex cept front speakers to matc h room acoustics. Audyssey Flat : Opti miz e fre que ncy respo nse of all speak e rs to fla t r esp ons e.
–6 ~ 0 ~ 6 0 ~ 12 Pictur e A djust Adjust the pict ure quality . F Menu tr ee F P aramet er Pictur e Adjust a Contrast s Br ightness d Chroma Lev el f Hue [V ariable r ang e] [V ariable r ang e] [V ariable r ang e] [V ariable r ang e] –6 ~ 0 ~ 6 –6 ~ 0 ~ 6 a Contrast Adjust pict ure contrast.
46 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Resolution Color Space Pixel Depth HDMI Inf or mation Shows inf ormation about HDMI input/output signals and monitor . F Menu tr ee F Infor mation HDMI Infor mation a Signal Infor mation s Monitor1 d Monitor2 Analog/PCM 2ch Digital 2ch Digital 5.
47 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting <ON/ST ANDBY> <POWER> <PHONES> SOURCE SELECT <MASTER VOLUME> <TUNING .
48 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Pr eset ting Radio Stations (Pr eset Memory) Y our fa v orite broadcast st ations can be preset so that you can tune them in easily . Up to 56 st ations can be preset.
49 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Note: The XM Radio ID does not use the let ters “I” , “ O ” , “S” or “F” . Activate your XM Satellite Radio ser vice in the U.S. online at ht tp://activ ate.
50 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting HD Radio™ tec hnology manufactured under license from iBiquit y Digital Corporation. iBiquit y Digital, the HD Radio logo, and the HD logo are registered trademarks of iBiquity Digit al Corporation.
51 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Check the HD Radio Reception Infor mation Press <ST A TUS> while an HD Radio broadcast is being recei ved. The current reception inf ormation is sho wn on the display .
52 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Shuffl ing playback Press [CHANNEL +] or [RANDOM] on the sub remote control unit.
53 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting n USB memory devices A USB memor y device can be connected to the A VR-4308CI’ s USB port to play music and still picture (JPEG) files stored on the USB memor y device.
54 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Stopping pla ybac k t emporar ily During playbac k, press ENTER . Press again to resume pla ybac k. T o stop During the play or pause mode, press and hold ENTER .
55 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Pr eset ting Int er net Radio Stations Preset Internet radio stations can be selected directly . NO TE If registered at a number that has already been preset, the previously registered set ting is cleared.
56 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Playing Files St or ed on USB Memory Devices Only USB memor y devices conforming to mass storage class and MTP (Media T ransfer Protocol) standards can be play ed on the A VR-4308CI.
57 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Operating the A VR-4308CI Using a Br o wser (W eb control) This function lets you operate the A VR-4308CI using Internet Explorer . 1 Check the A VR-4308CI’ s IP address.
58 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Other Operations and F unctions Other Oper ations Playing Super A udio CDs 1 At the “Digital” or “HDMI” setting ( v page 40), select the input source for which “DENON LINK” or “HDMI” is assigned.
59 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting 1 Press CH SELECT . 2 Press ui or CH SELECT to select “F ADER”. 3 Use o p to adjust the volume of the speakers. ( o : front, p : rear) • The fader function does not af fect the subw oof er .
60 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Remote Loc k Mode This set ting can be made so that the remote control unit cannot operate the A VR-4308CI, for example when not using it, etc. 1 T urn off the power using <POWER> .
61 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting R e m o t e C o nt r o l Un i t Op e r at i o n s Main Remote Control Unit • On the main remote control unit, the display switc hes according to the device being operated and the mode.
62 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting [MENU] [CH + / SHUFFLE], [CH – / REPEA T] [SETUP/ SEARCH] [ENTER] [RETURN] [0 ~ 9, +10] [ uiop.
63 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting [MENU] [CH +/–] [TV/VCR] [ENTER] [DISPLA Y] [0 ~ 9, +10] [ uiop ] [SETUP] [ 1 ], [ 8 9 ], [ 6 .
64 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting MODE SELECT OR Remote ID AMP (MAIN) TUNER iP od NET/DTU DEVICE 1 (Analog TUNER) DEVICE 2 (XM) DE.
65 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting Syst em Call Function This function lets y ou register a series of operations at a single but ton.
66 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Inf or mation T roubleshooting 1 Press [MODE SELECTOR] for the device you want to reset. 2 Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator fl ashes twice.
67 Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Remote Contr ol Device operated DVD, HDP , TV / CBL, DVR1, VCR, V .
68 Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Remote Contr ol Device operated SA T TU (XM) NET / USB iPod Zone selection M Z2 Z3 Z4 M Z2 Z3 Z4 M Z2 Z3 Z4 ZONE.
69 Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting [USB] [ALL MUSIC/FA VORITE] [ZONE SELECT] [ZONE OFF] Multi-zone indicator [MENU] [RANDOM] [REPEA T] [ADV ANCED SETUP] Switc hing Zones Use this procedure to select the zone to be operated b y the sub remote control unit.
70 Getting Star ted Connections Setup Playback Remote Control Infor mation T roubleshooting Multi-Zone Speaker terminal Amp A ssign mode FRONT CENTER SURR-A SURR.
71 Getting Star ted Connections Setup Playback Remote Control Infor mation T roubleshooting Multi-Zone Speaker terminal Amp A ssign mode FRONT CENTER SURR-A SURR.
72 Getting Star ted Connections Setup Playback Remote Control Infor mation T roubleshooting $ '- 48 48 '3 4- 43 4# 3 4# - $ '- '3 4- 43 ZONE3 audio output MAIN ZONE (7 .
73 Getting Star ted Connections Setup Playback Remote Control Infor mation T roubleshooting Multi-Zone Oper ations T ur ning the P ow er On and Of f G Operation on the main unit H Press <ZONE2 ON/OFF> , <ZONE3 ON/OFF> or <ZONE4 ON/OFF> f or the z one to be operated.
74 Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Sur round bac k speak ers Sound positioning directly to the rear can be ac hie v ed easily by adding a surround bac k speaker to a 5.
75 Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting G 2 H When not using surr ound bac k speak ers Subwoof er Surround speakers Monitor Center speaker F ront spea.
76 Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Manufact ured under license under U .S . Patent #’ s: 5,451,942; 5,956,67 4; 5,97 4,380; 5,978,7 62; 6,226,61 6; 6,487 ,535 & other U.S . and worldwide patents issued & pending.
77 Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting HDMI (High-Definition Multimedia Interf ace) HDMI is a digital interface standard for next generation TVs based on D VI (Digit al Visual Interface) standards and optimized for use in consumer equipment.
Surround Mode Signals and adjustabilit y in the dif f erent modes Parameter (def ault values are sho wn in parentheses) Mode Room Size Eff ect Level Delay Time Subwoof er PRO LO GIC g / g x MUSIC mode only NEO:6 MUSIC mode only EXT . IN only T one Night Mode Room EQ REST ORER Panorama Dimension Center W idth Center Image Subwoof er At t.
But ton Note Input signals ANALOG LINEAR PCM / W A V WMA (Windows Media A udio) / MP3 / MPEG-4 AA C / FLA C DTS DOLB Y DIGIT AL D VD-A UDIO Super A udio CD Surround mode DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1c h) DTS 96/24 DOLB Y DIGIT AL EX (With Flag) DOLB Y DIGIT AL EX (With no Flag) DOLB Y DIGIT AL (5.
But ton Note Input signals ANALOG LINEAR PCM / W A V WMA (Windows Media A udio) / MP3 / MPEG-4 AA C / FLA C DTS DOLB Y DIGIT AL D VD-A UDIO Super A udio CD Surround mode DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1c h) DTS 96/24 DOLB Y DIGIT AL EX (With Flag) DOLB Y DIGIT AL EX (With no Flag) DOLB Y DIGIT AL (5.
Windows Media Pla yer V er .1 1 vT uner This is a free online contents server f or Internet radio. Note that usage f ees are included in upgrade costs. F or inquiries about this ser vice, visit the vT uner site below . vT uner website: ht tp://www .radiodenon.
WP A (Wi-Fi Prot ect ed Access) This is a security standard established b y the Wi-Fi Alliance. In addition to the con ventional SSID (network name) and WEP ke y (network ke y), it also uses a user identification function and encr ypting protocol for stronger security .
Video Conv ert Input signal Monitor output Monitor output (when GUI menu displa yed) HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO ON A A A A b b z 3 z 3 z 3 z.
Video Convert SIGNAL IN MONITOR OUT (Normally) MONITOR OUT (when GUI menu displayed) HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO OFF A A A A A A A A S S S S .
Setting Status Speaker terminal ZONE2 ZONE3 SURROUND A SURROUND BACK SURROUND B/ ASSIGN ASSIGN-2 ZONE2 ON ON SLA/SRA – SLB/SRB Z2 L/R OFF SLA/SRA – SLB/SRB Z2 L/R OFF ON SLA/SRA SBL/SBR SLB/SRB .
If a problem should ar ise, first chec k the follo wing: 1 . Ar e the connections cor r ect? 2. Is the set being operated as descr ibed in the o wner ’ s manual? 3. Are the other components operating pr oper ly? If this unit does not operate properly , c hec k the items listed in the table belo w .
Sympt om Cause Counter measure Pag e No sound is produced from center speaker . • Monaural source (monitor , AM station, etc.) being played in “ST AND ARD” mode. • The mode is set to something other than “S T AND ARD” . 42 No sound is produced from surround speakers.
Sympt om Cause Counter measure Pag e When a USB memor y device is connected, “USB” is not display ed on the GUI menu. • The set cannot recognize a USB memor y device. • A USB memor y device not conforming to mass storage class or MTP standards is connected.
Sympt om Cause Counter measure Pag e Cannot connect to network. • The set tings of the SSID and net work ke y (WEP) are incorrect. • The reception is poor and the signals cannot be received. • There are multiple net works and the usable c hannels o verlap.
n Video section • Standard video connectors Input / output level and impedance: 1 Vp-p, 75 Ω/ohms Fr equency response: 5 Hz ~ 1 0 MHz — +0, –3 dB • S-Video connectors Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms C (color) signal — 0.
PRESET CODE 1 Denon Amp D Denon 81001, 82001, 83001, 84001 Denon T uner D Denon (Analog) 52863, 52795, 52800, 52805 Denon (XM Radio) 52864, 52812, 52813, 52814 Denon Digital T uner D Denon (NET) 62865.
PRESET CODE 2 T T AG McLaren 40157 T andy 40032 T ascam 40393, 40420 T eac 40490, 40393, 40420 T echnics 40029, 40303 T echwood 40303 Thomson 40053 Thorens 40157 Thule Audio 40157 T okai 40420 U Unive.
PRESET CODE 3 Esat 00879 Eurieult 00882 Eurocrypt 00455 EuroLine 01251 Europa 00863 Europhon 00299 Eurosky 00262, 00299 Eurostar 00818 Eutelsat 00713 Expressvu 00775, 01775 F Fenner 00713 Ferguson 004.
PRESET CODE 4 Satstation 01083 Schaub Lorenz 01214 Schneider 00710, 01206, 01251 Schwaiger 00394, 00504, 00863, 01075, 01083, 01111, 01317, 01334, 01412, 01457 SCS 00299 Sedea Electronique 00125, 0120.
PRESET CODE 5 Alba 10009, 10036, 10037, 10073, 10163, 10218, 10352, 10370, 10371, 10418, 10443, 10487, 10668, 10714, 11037 Albatron 10700, 10843 Alfide 10672 All-T el 10865, 11269 Alleron 10030, 1017.
PRESET CODE 6 Elcit 10163 Electroband 10000 Electrograph 11755 Electrohome 10154, 10000, 10463, 10150, 10178, 10030, 10073 Elekta 10009, 10264 Elfunk 11037, 11208 ELG 10037 Elin 10009, 10037, 10361, 1.
PRESET CODE 7 JVC 10054, 10093, 10463, 10053, 10030, 10070, 10036, 10218, 10371, 10418, 10508, 10606, 10650, 10653, 10683, 10731, 11253, 11923 K Kaige 10009, 10264, 10817 Kaisui 10009, 10037, 10217, 1.
PRESET CODE 8 Panasonic 10054, 10000, 10156, 10250, 10051, 10236, 10030, 11947, 11946, 11941, 11480, 11310, 11291, 11271, 10853, 10650, 10548, 10508, 10367, 10361, 10226, 10208, 10163, 10108, 10037, 1.
PRESET CODE 9 Strato 10009, 10037, 10264 Strong 11149, 11163 Studio Experience 10843 Stylandia 10217 Sunkai 10218, 10455, 10487, 10610, 10865 Sunstar 10009, 10037, 10264, 10371 Sunwatt 10455 Sunwood 1.
PRESET CODE 10 E Elfunk 11037 F Ferguson 11037 Finlux 11556 G Goodmans 10587, 11037, 11900 H Hitachi 11960 J JDV 11982 Jensen 11933 K KLH 11962 L Lenco 10587 Logik 11037 Luker 11982 Luxor 11037 M Mats.
PRESET CODE 11 GE 20060, 20035, 20048, 20240, 20000, 20226, 20320, 20807, 21035, 21060 GEC 20081 Gemini 20060 General 20045 General T echnic 20348 Genexxa 20037, 20000, 20104, 20278 Go Video 20240, 20.
PRESET CODE 12 Schaub Lorenz 20000, 20104, 20041, 20106, 20315, 20348 Schneider 20037, 20081, 20240, 20000, 20042, 20278, 20348, 20352, 20642, 21137 Scott 20184, 20045, 20121, 20043 Sears 20060, 20035.
PRESET CODE 13 Sears 20037, 20000, 21237 SEG 20637 Sharp 20037, 20048, 20807 Shivaki 20037 Siemens 20081 Sinudyne 20352 Sony 20032, 20000, 21232 Supra 20348 Sylvania 20081, 21781 Symphonic 20000 T T a.
PRESET CODE 14 Jaton 30665 JBL 30702 JDB 30730 JDV 31367 Jeken 30699 Jepssen 31250 JMB 30695 JNC 30672, 31271 JSI 31423 JVC 30503, 30539, 30558, 30623, 30867, 31164, 31597, 31860 jWin 31051 K Kansas T.
PRESET CODE 15 Sylvania 30630, 30675, 30821, 31268 Symphonic 30675, 30821, 31268 Synn 30768 T T andberg 30713, 31695 T angent 31321 T arga 31227 T atung 30770, 31695 T chibo 30741 TCL 31180 TCM 30741,.
PRESET CODE 16 D VD pr eset codes / Codes pr éréglés D VD DENON Model No. / Modéle numéro 32134 (def ault / déf aut) 30490 D VD-555 D VD-755 D VD-900 D VD-91 0 D VD-955 D VD-1 0 00 D VD-1 200 D .
Denon Brand Company , D&M Holdings Inc. Printed in J apan 00D 51 1 4609 004 T OKY O, J AP AN www .denon.com 4.AVR4308_P70~Last.indd 38 2007/05/11 16:05:25.
An important point after buying a device Denon AVR-4308CI AV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Denon AVR-4308CI AV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Denon AVR-4308CI AV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Denon AVR-4308CI AV you will learn all the available features of the product, as well as information on its operation. The information that you get Denon AVR-4308CI AV will certainly help you make a decision on the purchase.
If you already are a holder of Denon AVR-4308CI AV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Denon AVR-4308CI AV.
However, one of the most important roles played by the user manual is to help in solving problems with Denon AVR-4308CI AV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Denon AVR-4308CI AV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
