Instruction/ maintenance manual of the product Series DNM04 Delta Electronics
Go to page of 16
DATASHEET DS_DNM04SIP10_ 07162008D FEATURES High efficiency: 96% @ 5.0Vin, 3.3V/10A out Small size and low profile: (SIP) 50.8x 13.4x 8.5 mm (2.
DS_DNM04SIP10_071620 08D 2 TECHNICAL SPECIFICA TIONS (T A = 25°C, airfl ow rate = 300 LFM, V in = 2.8Vdc and 5.5V dc, nominal V out u nless otherwise noted.) P ARAMETE R NOTES and CONDITIONS DNM04S0A0R10 Min. T yp. Max. Units ABSOLUTE MAXIMUM RA TINGS Input V oltage (Continuous) 0 5.
DS_DNM04SIP10_071620 08D 3 ELECTRICAL CHARACTERISTICS CUR VES Figure 1: Converter efficiency vs. output current (3.3V out) Figure 2: Converter efficiency vs. output current (2.5V out) Figure 3: Converter efficiency vs. output current (1.8V out) Figure 4 : Converter efficiency vs.
DS_DNM04SIP10_071620 08D 4 ELECTRICAL CHARACTERISTICS CUR VES Figure 7: Output ripple & noise at 3.3V in, 2.5V/10A out Figure 8: Outp ut ripple & noise at 3.3Vin, 1.8V/10A out Figure 9: Output ripple & noise at 5Vin, 3.3V/10A out Figure 10: Output ripple & noise at 5Vin, 1.
DS_DNM04SIP10_071620 08D 5 ELECTRICAL CHARACTERISTICS CUR VES Figure 13: T urn on delay time at 5Vin, 3.3V/10A out Figure 14: T urn on delay ti me at 5Vin, 1.8V/10A out Figure 15: T urn on delay time at remote turn on 5Vin, 3.3V/16A out Figure 16: T urn on delay time at remote turn on 3.
DS_DNM04SIP10_071620 08D 6 ELECTRICAL CHARACTERISTICS CUR VES Figure 19: T ypical transient response to step load change at 2.5A/ μ S from 100% to 50% of Io, max at 5Vin, 3.3V out (Cout = 1uF ceramic, 10 μ F tantalum) Figure 20: T ypical transient response to step load change at 2.
DS_DNM04SIP10_071620 08D 7 ELECTRICAL CHARACTERISTICS CUR VES Figure 23: T ypical transient response to step load change at 2.5A/ μ S from 100% to 50% of Io, max at 3.3Vin, 2.5V o ut (Cout =1uF ceramic, 10 μ F t antalum) Figure 24: T ypical transient response to step load change at 2.
DS_DNM04SIP10_071620 08D 8 TEST CONFIGURA TIONS V I (+) V I (-) BATTERY 2 100uF Tantalum L TO OSCILLOSCOPE Note: Input reflected-ripple current is measured with a simulated sour ce inductance.
DS_DNM04SIP10_071620 08D 9 DESIGN CONSIDERA TIONS (CON.) The power module sh ould be conne cted to a low ac-impedance input source. Hig hly inductive source impedances can af fect the st ability of the module.
DS_DNM04SIP10_071620 08D 10 FEA TURES DESCRIPTIONS (CON.) Over-T emperature Protection The over-temperature protection consists of circuitry that provides protection from thermal damage. If the temperature exceeds the ove r-temperature thre shold the module will shut down.
DS_DNM04SIP10_071620 08D 11 The output voltage tracking f eature (Figure 40 to Figure 42) is achieved according to the different extern al connections. If the tracking feature is not used, the TRACK pin of the module can be le ft unconnecte d or tied to Vin.
DS_DNM04SIP10_071620 08D 12 FEA TURE DESCRIPTIONS (CON.) Sequential St art-up Sequential start-u p (Figure 40) is implemented by placing an On/Off control circuit b etween V o PS1 and the On/Of f pin of PS2.
DS_DNM04SIP10_071620 08D 13 THERMAL CONSIDERA TIONS Thermal management is an importa nt part of the system design. To ensure prop er, reliable operation, suffici ent cooling of the power mod ule is needed over the entire temperature range of the modul e.
DS_DNM04SIP10_071620 08D 14 THERMAL CURVES Figure 44: T emperature mea surement location * The allowed max imum hot spot temperature is defined at 125 ℃ DNM04S0A0R10( Standard) Output Current vs. Ambient Tem perature and Air Velocity @ Vin = 5V, Vo = 3.
DS_DNM04SIP10_071620 08D 15 MECHANICAL DRA WING SMD P ACKAGE (OPTIONAL) SIP P ACKAGE.
DS_DNM04SIP10_071620 08D 16 P ART NUMBERING SYSTEM DNM 04 S 0A0 R 10 P F D Product Series Input V olt ag e Numbers of Output s Output V olt age Package Ty p e Output Current On/Off logic Option Code DNL - 16A DNM - 10A DNS - 6A 04 - 2.
An important point after buying a device Delta Electronics Series DNM04 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta Electronics Series DNM04 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta Electronics Series DNM04 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta Electronics Series DNM04 you will learn all the available features of the product, as well as information on its operation. The information that you get Delta Electronics Series DNM04 will certainly help you make a decision on the purchase.
If you already are a holder of Delta Electronics Series DNM04, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta Electronics Series DNM04.
However, one of the most important roles played by the user manual is to help in solving problems with Delta Electronics Series DNM04. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta Electronics Series DNM04 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
