Instruction/ maintenance manual of the product D29382 Delta
Go to page of 18
P ART NO. D29382 Rev . 0 Copyright © 2003 Delta Machinery T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, pl.
2- ENG D29382 • W ater spray directed at electrical outlets or switches, or objects connected to an electri- cal circuit, could result in a fatal electrical shock. • Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.
3- ENG D29382 • Some cleaning fluids contain substances which could cause injury to skin, eyes, or lungs. • Use only cleaning fluids specifically recom- mended for high pressure washers . Follow manufacturers recommendations. Do not use chlorine bleach or any other corrosive compound.
4- ENG D29382 • Reactive for ce of spray will cause gun/wand to move, and could cause the operator to slip or fall, or misdirect the spray . Improper control of gun/wand can r esult in injuries to self and others. • Do not overr each or stand on an unstable support.
DANGER 5- ENG D29382 The powerful spray from your pr essure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs.
6- ENG D29382 GENERAL INFORMA TION ● Congratulations! Y ou have pur chased a high quality product from America’ s leading manufacturer of pr essure washers. This pressur e washer , when properly used and maintained, will pr ovide trouble free service.
7- ENG D29382 ASSEMBL Y INSTRUCTIONS 2. Connect spray wand to gun. Tighten securely . 3. Attach high pressur e hose to gun. Tighten securely . 1. Place handle assembly onto frame and connect handle to frame.
8- ENG D29382 OPERA TING INSTRUCTIONS BASIC ELEMENTS OF A PRESSURE WASHER High Pressur e Pump (located inside the shroud) : Increases the pr essure of the water supply . Motor (located inside the shroud): Drives the high pr essure pump. High Pressur e Hose: Carries the pressurized water from the pump to the gun and wand.
9- ENG D29382 HOW TO USE THE CLEANING SOLUTION APPLICA TION UNIT NOTE: Use only soaps and cleaning solutions designed for pressur e washer use. Do not use bleach. 1. Place the ON-OFF switch in the OFF position. 2. T urn off the water supply . 3. Attach cleaning solution application unit to wand as shown and tighten securely .
10- ENG D29382 4. Remove the cleaning solution application tank from the application nozzle. 5. Soap mixture pr essure can be adjusted by adjusting the pipe located in the cleaning solution application nozzle (a). a. Pull pipe (b) from cleaning solution application nozzle.
11- ENG D29382 BEFORE ST ARTING 1. Move pressure washer to level gr ound. 2. Make sure the ON/OFF switch is in the OFF position T o r educe the risk of electrocution, keep all connections dry and off the gr ound. Do not touch plug with wet hands. Do not use if cord is damaged.
12- ENG D29382 6. Connect the high pressure hose (i) to the water outlet on the unit. The water outlet is marked OUT . 7. Assemble quick-connect adapter (k) to water inlet. 8. Connect the quick-connect (j) to the water supply hose. 9. Connect quick-connect (j) to quick connect adapter (k) at the water inlet.
13- ENG D29382 SUCTION FIL TER 1. Check and clean the suction filter (b) after every 50 hours of use. When performing maintenance, you may be exposed to hot surfaces, water pressur e, or moving parts .
5. Clean the nozzle using the nozzle cleaner provided or a straightened paper clip. Insert into the nozzle end and work back and forth until obstruction is removed. 6. Direct water supply into nozzle end to backflush loosened particles for 30 seconds.
15- ENG D29382 1. Drain all water fr om high pressure hose , coil it, and stor e it in cradle of the pressur e washer handle. 2. Drain all water fr om spray gun and spray wand by holding spray gun in a vertical position with nozzle end pointing down and squeezing trigger .
PROBLEM 16- ENG D29382 Restricted, insufficient water supply , or air in the water line. Check supply hose, faucet, and inlet screen. Do not use water from a hot water source, use water only fr om a cold water faucet. Excess noise W ater temperature is too high.
17- ENG D29382.
18- ENG D29382 W ARRANTY DEL T A MACHINERY warrants to the original purchaser that all pr oducts covered under this warranty are free from defects in material and workmanship.
An important point after buying a device Delta D29382 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta D29382 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta D29382 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta D29382 you will learn all the available features of the product, as well as information on its operation. The information that you get Delta D29382 will certainly help you make a decision on the purchase.
If you already are a holder of Delta D29382, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta D29382.
However, one of the most important roles played by the user manual is to help in solving problems with Delta D29382. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta D29382 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
