Instruction/ maintenance manual of the product 23-980 Delta
Go to page of 8
8" and 10" Bench Grinders (Models 23-880 & 23-980) The Serial No. and Model No. plate is attached to the front of the motor . Locate this plate and recor d the Serial No. and Model No. in your manual for future r eference. SERIAL NO. MODEL NO.
W oodworking can be danger ous if safe and proper operating pr ocedures are not followed. As with all machinery , there are certain hazar ds involved with the operation of the product. Using the machine with r espect and caution will consid- erably lessen the possiblity of personal injury .
ADDITIONAL SAFETY RULES FOR GRINDERS 1. WARNING: Do not operate your grinder until it is completely assembled and installed according to the instructions. 2. IF YOU ARE NOT thoroughly familiar with the operation of grinders, obtain advice from your supervisor , instructor or other qualified person.
ASSEMBLING TOOL RESTS 1. Assemble adjustable tool rest (A) Fig. 1, to left side of tool rest arm (B), as shown, and fasten with one 3/4 inch- long hex head screw and lockwasher (C). Assemble the remaining tool r est to the right side of the other tool rest arm in the same manner .
Fig. 5 Fig. 6 Fig. 7 2. Insert the short end of mounting rod (F) Fig. 5, into hole of frame (B) and fasten in place with 3/4 inch-long square necked r ound head screw (G) and nut (H). 3. Assemble long end of eye shield mounting rod (F) Fig. 6, to the side of each wheel guard using bracket (J), lockwasher and locking knob (L).
EXTENSION CORDS Use proper extension cor ds. Make sure your extension cor d is in good condition and is a 3-wire extension cor d which has a 3-prong gr ounding type plug and a 3-pole receptacle which will accept the tool’ s plug. When using an extension cord, be sure to use one heavy enough to carry the curr ent of the grinder .
ST ARTING AND STOPPING GRINDER The switch (A) Fig. 10, is located on the front of the grinder . T o tur n the grinder “ON” push the left hand portion of the switch and to turn the grinder “OFF” push the right hand portion of the switch. Fig. 10 Fig.
Delta Building T rades and Home Shop Machinery T wo Y ear Limited W arranty Delta will repair or r eplace, at its expense and at its option, any Delta machine, machine part, or machine acces- sory whi.
An important point after buying a device Delta 23-980 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta 23-980 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta 23-980 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta 23-980 you will learn all the available features of the product, as well as information on its operation. The information that you get Delta 23-980 will certainly help you make a decision on the purchase.
If you already are a holder of Delta 23-980, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta 23-980.
However, one of the most important roles played by the user manual is to help in solving problems with Delta 23-980. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta 23-980 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
