Instruction/ maintenance manual of the product 16" BENCH GRINDERS 23-640 Delta
Go to page of 10
INSTRUCTION MANUAL 6" Bench Grinders (Model 23-640 & 23-645) P ART NO. 900464 (011) Copyright © 2001 Delta Machinery ESP AÑOL: PÁGINA 11 T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582).
2 SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury .
3 ADDITIONAL SAFETY RULES FOR GRINDERS 1. DO NOT OPERA TE your tool until it is completely assembled and installed according to the instructions. 2. IF YOU ARE NOT thoroughly familiar with the oper- ation of grinders, obtain advice from your supervisor , instructor or other qualified person.
4 UNP ACKING AND CLEANING Carefully unpack the tool and all loose items fr om the carton. Remove the pr otective coating from all unpainted parts. This coating may be removed with a soft cloth moistened with ker osene (do not use acetone, gasoline, or lacquer thinner for this purpose).
5 HARDW ARE ILLUSTRA TION Hardwar e Illustrated in actual size Fig. 2 11/16" Flat W asher (2) 3/4" Flat W asher (4) 5/16 - 18 x 1/2" Hex Head Screw (2) 5/16 - 18 x 5/8" Hex Head Sc.
6 Fig. 3 ASSEMBL Y ASSEMBLING TOOL RESTS 1. Assemble the v-grooved tool r est (A) Fig. 3, to the inside of the right wheel guard using two 5/16-18x5/8" hex head screws (B), and 3/4" flat washers (C). 2. Assemble the remaining flat surfaced tool r est (D) Fig.
7 Fig. 7 2. Insert the short end of mounting rod (F) Fig. 7, into hole of frame (B) and fasten in place with 1/4-20x3/4" carriage head screw (G), 5/16” lock washer (H), and 1/4- 20 hex nut (I). Fig. 8 3. Assemble long end of eye shield mounting rod (F) Fig.
8 EXTENSION CORDS Use proper extension cor ds. Make sur e your extension cord is in good condition and is a 3-wir e extension cor d which has a 3-prong gr ounding type plug and a 3-pole receptacle which will accept the tool’ s plug. When using an extension cord, be sur e to use one heavy enough to carry the current of the tool.
9 Fig. 14 ST AR TING AND STOPPING GRINDER The switch (A) Fig. 14, is located on the front of the grinder . T o turn the grinder “ON” push the left hand portion of the switch and to turn the grinder “OFF” push the right hand portion of the switch.
10 P AR TS, SERVICE OR WARRANTY ASSIST ANCE All Delta Machines and accessories are manufactur ed to high quality standar ds and are serviced by a network of Porter - Cable•Delta Factory Service Centers and Delta Authorized Service Stations.
An important point after buying a device Delta 16" BENCH GRINDERS 23-640 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta 16" BENCH GRINDERS 23-640 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta 16" BENCH GRINDERS 23-640 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta 16" BENCH GRINDERS 23-640 you will learn all the available features of the product, as well as information on its operation. The information that you get Delta 16" BENCH GRINDERS 23-640 will certainly help you make a decision on the purchase.
If you already are a holder of Delta 16" BENCH GRINDERS 23-640, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta 16" BENCH GRINDERS 23-640.
However, one of the most important roles played by the user manual is to help in solving problems with Delta 16" BENCH GRINDERS 23-640. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta 16" BENCH GRINDERS 23-640 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center