Instruction/ maintenance manual of the product Magnifica ESAM 4500 DeLonghi
Go to page of 17
23 INDICE 1 DESCRIPTION OF THE APPLIANCE (see page 3) 2 SAFETY W ARNINGS 3 INST ALLA TION 4 USING FOR THE FIRST TIME 5 TURNING ON AND PREHEA TING 6 PREP ARING COFFEE (USING COFFEE BEANS) 7 CHANGING TH.
24 1 DESCRIPTION OF THE APPLIANCE (SEE P AGE 3) A. Grinding coarseness regulator B. Cof fee beans container C. Bean container lid D. Central lid for ground coffee E. Compartment for measure F. Cup warmer tray G. Ground coffee funnel H. Milk container lid with froth regulator I.
3 INST ALLA TION • After unpacking, make sure the appliance is complete and undamaged. If in doubt, do not use it. Contact professionally qualified personnel. • The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of the reach of children as they are a safety hazard.
26 5. The appliance displays: TURNING OFF PLEASE WAIT and it goes off. 6. Fill the container with coffee beans (fig. 5). IMPORT ANT : to prevent malfunction, never fill with ground coffee, freeze dried cof fee, caramelised beans or anything else which could damage the appliance.
27 NOTE 1: If the coffee is delivered a drop at a time or not at all, turn the grinding coarseness regulator (fig. 12) one click clockwise (see section 8). Tu rn one click at a time until the cof fee is delivered satisfactorily . NOTE 2: If the coffee is delivered too fast and is not creamy enough, turn the grinding coarseness regulator (fig.
28 To turn the appliance on again, you must insert the water spout (fig. 4), press the button and run off water from the spout for a few seconds. When using the appliance for the first time, 4-5 cups of coffee and a cappuccino need to be made before the appliance star ts to give satisfying results.
9 PREP ARING ESPRESSO COFFEE WITH PRE-GROUND COFFEE (INSTEAD OF BEANS) •P ress the button (fig. 16) to select the ground coffee function. This disables the cof fee mill function. The appliance displays: READY PRE-GROUND • Lift the lid in the centre, place one measure of ground coffee in the funnel (see fig.
• When the hot water in the cup reaches the required level, press the button to memorise the new amount. (Y ou should not run off hot water for more than two minutes at a time).
31 13 PREP ARING FROTHED MILK (WITHOUT COFFEE) • Remove the lid of the milk container . • Fill the container with the quantity of milk you want to prepare (fig.19). • Replace the lid on the milk container . • Attach the milk container to the appliance (fig.
32 CORRECT INCORRECT The two red buttons have snapped out CORRECTL Y The two red buttons have not snapped out •r eplace the infuser by sliding it onto the supports and pin at the bottom, then push the PUSH symbol fully in until it clicks into place.
33 • Remove the milk spout (fig. 32) and intake tube. • Remove the froth regulator by pulling it outwards. •W ash the container and lid in a dishwasher or in hot soapy water . Make sure there are no milk resi- dues inside the two holes in the lid of the milk con- tainer indicated by the arrows in the figure.
34 •P ress the button to activate auto-start; NOTE: when the appliance is turned of f and auto-start time is set, the symbol appears alongside the time on the unlit display . •P ress the button to exit programming mode or to change other parameters.
•P ress the OK button and refill the water tank with clean water . • The descale programme is now terminated and the appliance is ready to make cof fee again. NOTE: if the descaling cycle is interrupted before completion, the appliance continues to display the descale message and the programme must be started again from the beginning.
16.7 Resetting factor y default settings (reset) If you change the original values, the factor y default values can be reset as follows: •P ress the button then press repeatedly until the appliance .
37 18 MEANING OF MESSAGE DISPLA YED AND WHA T TO DO ADD PRE-GROUND COFFEE • With the function selected, the pre- ground coffee has not been poured into the funnel. • Add the ground coffee as described in section 9. FILL BEANS CONTAINER • The coffee beans have run out.
38 MESSAGE MESSAGE WHA T TO DO GENERIC ALARM • The inside of the appliance is ver y dirty . • Clean the inside of the appliance tho- roughly , as described in section 15.2 If the message is still displayed after cleaning, contact a ser vice centre.
39 PROBLEM CAUSE SOLUTION The coffee does not come out of the spouts, but rather around the ser vice door . • The holes in the spouts are clogged with dr y coffee. • The mobile drawer inside the service door is blocked and cannot swing. • Scrape the holes with a needle (see section 15.
An important point after buying a device DeLonghi Magnifica ESAM 4500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeLonghi Magnifica ESAM 4500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeLonghi Magnifica ESAM 4500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeLonghi Magnifica ESAM 4500 you will learn all the available features of the product, as well as information on its operation. The information that you get DeLonghi Magnifica ESAM 4500 will certainly help you make a decision on the purchase.
If you already are a holder of DeLonghi Magnifica ESAM 4500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeLonghi Magnifica ESAM 4500.
However, one of the most important roles played by the user manual is to help in solving problems with DeLonghi Magnifica ESAM 4500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeLonghi Magnifica ESAM 4500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
